[Fri May 3 22:05:32 2013] Detection parameters: Position = (468.3, 253.1) = 12 42 34.72 -63 6 44.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 93.0 +/- 15.8 Background counts = 35.8 Rate = 0.002 +/- 0.0004 [Fri May 3 22:05:33 2013] Off-axis axis estimate = 12.74' [Fri May 3 22:05:56 2013] Using EEF radius (= 12.80 ")to estimate initial spatial extent for simple fitting [Fri May 3 22:05:56 2013] Initial guess for spatial extent in simple fitting = 12.80" [Fri May 3 22:05:56 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.034 [Fri May 3 22:05:56 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 12.80" [Fri May 3 22:05:57 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src20.ximg exists [Fri May 3 22:05:57 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src20_1.ximg exists [Fri May 3 22:05:57 2013] Fit fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src20 appears to have run properly [Fri May 3 22:05:58 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists [Fri May 3 22:05:58 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists [Fri May 3 22:05:58 2013] Fit fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly [Fri May 3 22:06:08 2013] Spatial fit model total counts = 731.358000, observed total counts = 695.000000 [Fri May 3 22:06:08 2013] Offset between fit and detection position for source 20 = 1.558719 pixels [Fri May 3 22:06:08 2013] 732.411000 total counts/ 611.198000 bgd. counts: snr = 4.902959 Spatial fit parameters: Offset between fit and detection position for source 20 = 1.558719 pixels Position = (469.3, 251.9) = 12 42 34.05 -63 6 53.0 Extent = 25.6 (20.5-51.2)" x 4.9 (3.5-7.4)", rotation angle = 57 (49-65) degrees Source counts = 121.2 +/- 27.1 Background counts = 611.2 Rate = 0.003 +/- 0.0006 [Fri May 3 22:06:08 2013] Vigneting correction estimate = 1.000000 [Fri May 3 22:06:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 22:06:08 2013] Assessing source extent using major axis lower bound [Fri May 3 22:06:08 2013] Source does appear to be extended [Fri May 3 22:06:08 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.76 [Fri May 3 22:06:08 2013] Source is asymmetric [Fri May 3 22:06:08 2013] Source is confused with source 14 [Fri May 3 22:06:25 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Fri May 3 22:06:25 2013] Initial guess for spatial extent in simple fitting = 15.27" [Fri May 3 22:06:25 2013] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.995 [Fri May 3 22:06:25 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 15.27" [Fri May 3 22:06:25 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src18.ximg exists [Fri May 3 22:06:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src18.csv [Fri May 3 22:06:25 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src18_1.ximg exists [Fri May 3 22:06:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src18.csv [Fri May 3 22:06:25 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src18_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 22:06:26 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists [Fri May 3 22:06:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src18.csv [Fri May 3 22:06:26 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists [Fri May 3 22:06:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src18.csv [Fri May 3 22:06:26 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 22:06:34 2013] Warning, spatial fit 18 centroid is now closest to src. 16 [Fri May 3 22:06:34 2013] Vigneting correction estimate = 1.000000 [Fri May 3 22:06:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 22:06:34 2013] Assessing source extent using major axis lower bound [Fri May 3 22:06:34 2013] Source does appear to be extended [Fri May 3 22:06:34 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.76 [Fri May 3 22:06:34 2013] Source is asymmetric [Fri May 3 22:06:49 2013] XMMSAS src. selection expression = ellipse(40779.648400, 21866.133000, 1536.060044, 295.785609, 57.389000, X, Y) [Fri May 3 22:06:49 2013] Not overwriting source region fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src20_src.reg [Fri May 3 22:06:49 2013] Extracting stamp from image fullrun_pn_xmm0109480401_pi300-10000_cl_sm2.00.img.gz, (381, 164) - (558, 340) [Fri May 3 22:06:49 2013] XMMSAS bgd. selection expression = annulus(40779.648400, 21866.133000, 2560.100074, 5120.200147, X, Y) && !ellipse(38589.519360, 25922.999400, 1643.313647, 1643.313647, 0.000000, X, Y) && !ellipse(37559.931580, 27791.258392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38788.004761, 27829.132385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40090.206360, 23182.162048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39232.802000, 23889.586000, 1273.840037, 1273.840037, 0.000000, X, Y) && !ellipse(39022.690765, 23288.594208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40384.963000, 22589.865400, 2011.624058, 478.947214, 63.706000, X, Y) && !ellipse(37442.236400, 21968.985800, 404.722412, 404.722412, 0.000000, X, Y) && !ellipse(41577.132000, 20590.406000, 2095.648060, 655.286419, 238.697000, X, Y) && !ellipse(41682.142000, 20174.930000, 2184.536063, 2184.536063, 0.000000, X, Y) && !ellipse(35549.174347, 19528.647919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42691.082000, 18332.490000, 2165.792062, 2165.792062, 0.000000, X, Y) && !ellipse(42949.314484, 17944.001648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43304.326416, 17421.360458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43560.472000, 16883.456000, 1393.296040, 1393.296040, 0.000000, X, Y) && !ellipse(43973.640717, 16062.882858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36782.634000, 28370.648000, 1814.872052, 1814.872052, 0.000000, X, Y) [Fri May 3 22:06:49 2013] Writing fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src20.gif [Fri May 3 22:06:51 2013] ../../xmm0109480401/products/events/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src20_src.evt and ../../xmm0109480401/products/events/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src20_bgd.evt exist, delete to re-create [Fri May 3 22:06:51 2013] Mean detx,y = (-12117.45, -9209.22) [Fri May 3 22:06:51 2013] ../../xmm0109480401/products/images/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src20_src.img and ../../xmm0109480401/products/images/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src20_bgd.img exist, delete to re-create [Fri May 3 22:06:51 2013] ../../xmm0109480401/products/spectra/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src20_src.pi and ../../xmm0109480401/products/spectra/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src20_bgd.pi exist, delete to re-create [Fri May 3 22:06:51 2013] Setting source spectrum file to fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src20_src.pi.gz [Fri May 3 22:06:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src20_bgd.pi.gz [Fri May 3 22:06:51 2013] ../../xmm0109480401/products/lightcurves/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src20_src.lc and ../../xmm0109480401/products/lightcurves/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src20_bgd.lc exist, delete to re-create [Fri May 3 22:12:39 2013] Updating aperture counts using extracted products [Fri May 3 22:12:39 2013] Total counts from fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src20_src.pi.gz = 323.00 [Fri May 3 22:12:39 2013] Total counts from fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src20_bgd.pi.gz = 7657.00 [Fri May 3 22:12:39 2013] Got source and background scale factors 1311063.000000, 39307412.000000 [Fri May 3 22:12:39 2013] User source parameters: Position = (469.3, 251.9) = 12 42 34.05 -63 6 53.0 Extent = 25.6 (20.5-51.2)" x 4.9 (3.5-7.4)", rotation angle = 57 (49-65) degrees Source aperture counts = 67.6 +/- 19.0 Background aperture counts = 255.4 Rate = 0.002 +/- 0.0004 [Fri May 3 22:12:43 2013] No arf file for this source, not re-computing flux [Fri May 3 22:12:52 2013] Flag c found in src. 20 procflags, skipping spectral fitting [Fri May 3 22:12:52 2013] Source 20 has no response, skipping [Fri May 3 22:12:53 2013] xmm0109480401/analysis//spectral/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete