[Fri May  3 22:05:32 2013] Detection parameters:
  Position = (444.4, 298.8) = 12 42 50.17 -63 3 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72163.1 +/- 330.4
  Background counts = 41.8
  Rate = 2 +/- 0.007

[Fri May  3 22:05:33 2013] Off-axis axis estimate = 10.58'
[Fri May  3 22:05:56 2013] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Fri May  3 22:05:56 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 22:05:56 2013] Initial guess for spatial extent in simple fitting = 11.72"
[Fri May  3 22:05:56 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.029
[Fri May  3 22:05:56 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.72"
[Fri May  3 22:05:57 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src1.ximg exists
[Fri May  3 22:05:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src1.csv
[Fri May  3 22:05:57 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May  3 22:05:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src1.csv
[Fri May  3 22:05:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:05:57 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May  3 22:05:57 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May  3 22:05:57 2013] Fit fullrun_pn_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May  3 22:06:08 2013] Spatial fit model total counts = 72290.400000, observed total counts = 70847.000000
[Fri May  3 22:06:08 2013] Offset between fit and detection position for source 1 = 0.454376 pixels
[Fri May  3 22:06:08 2013] 72447.500000 total counts/ 15737.000000 bgd. counts: snr = 452.066686
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.454376 pixels
  Position = (444.1, 298.5) = 12 42 50.39 -63 3 30.9
  Extent = 7.5 (7.5-7.6)", rotation angle = 0
  Source counts = 56710.5 +/- 269.2
  Background counts = 15737.0
  Rate = 1 +/- 0.006
[Fri May  3 22:06:08 2013] Vigneting correction estimate = 1.000000
[Fri May  3 22:06:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 22:06:08 2013] Assessing source extent using major axis lower bound
[Fri May  3 22:06:08 2013] Source does appear to be extended
[Fri May  3 22:06:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 22:06:25 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 22:06:25 2013] Initial guess for spatial extent in simple fitting = 7.51"
[Fri May  3 22:06:25 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.010
[Fri May  3 22:06:25 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.51"
[Fri May  3 22:06:25 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src1.ximg exists
[Fri May  3 22:06:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src1.csv
[Fri May  3 22:06:25 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May  3 22:06:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src1.csv
[Fri May  3 22:06:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:06:25 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May  3 22:06:25 2013] fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May  3 22:06:25 2013] Fit fullrun_pn_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May  3 22:06:34 2013] Spatial fit model total counts = 67789.600000, observed total counts = 67338.000000
[Fri May  3 22:06:34 2013] Offset between fit and detection position for source 1 = 0.017824 pixels
[Fri May  3 22:06:34 2013] 68050.000000 total counts/ 15259.000000 bgd. counts: snr = 427.362934
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.017824 pixels
  Position = (444.1, 298.5) = 12 42 50.38 -63 3 30.9
  Extent = 6.8 (6.8-6.9)", rotation angle = 0
  Source counts = 52791.0 +/- 260.9
  Background counts = 15259.0
  Rate = 1 +/- 0.006
[Fri May  3 22:06:34 2013] Vigneting correction estimate = 1.000000
[Fri May  3 22:06:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 22:06:34 2013] Assessing source extent using major axis lower bound
[Fri May  3 22:06:34 2013] Source does appear to be extended
[Fri May  3 22:06:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 22:06:49 2013] Counts = 52791.000000, rescaling region sizes by 3.000000
[Fri May  3 22:06:49 2013] XMMSAS src. selection expression = ellipse(38589.519360, 25922.999400, 1232.485235, 1232.485235, 0.000000, X, Y)
[Fri May  3 22:06:49 2013] Not overwriting source region fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src1_src.reg
[Fri May  3 22:06:49 2013] Extracting stamp from image fullrun_pn_xmm0109480401_pi300-10000_cl_sm2.00.img.gz, (373, 228) - (515, 369)
[Fri May  3 22:06:49 2013] XMMSAS bgd. selection expression = annulus(38589.519360, 25922.999400, 6162.426177, 12324.852355, X, Y) && !ellipse(41214.409485, 29857.311920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37559.931580, 27791.258392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31164.696136, 28040.393066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38788.004761, 27829.132385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30320.285840, 23878.733000, 441.494413, 441.494413, 0.000000, X, Y) && !ellipse(40090.206360, 23182.162048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39232.802000, 23889.586000, 1273.840037, 1273.840037, 0.000000, X, Y) && !ellipse(39022.690765, 23288.594208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30942.544000, 23076.128000, 463.217613, 463.217613, 0.000000, X, Y) && !ellipse(40384.963000, 22589.865400, 2011.624058, 478.947214, 63.706000, X, Y) && !ellipse(31664.406000, 22697.020000, 1499.392043, 1499.392043, 0.000000, X, Y) && !ellipse(40779.648400, 21866.133000, 2048.080059, 394.380811, 57.389000, X, Y) && !ellipse(37442.236400, 21968.985800, 404.722412, 404.722412, 0.000000, X, Y) && !ellipse(32406.664000, 21219.950000, 411.436012, 411.436012, 0.000000, X, Y) && !ellipse(41577.132000, 20590.406000, 2095.648060, 655.286419, 238.697000, X, Y) && !ellipse(41682.142000, 20174.930000, 2184.536063, 2184.536063, 0.000000, X, Y) && !ellipse(35549.174347, 19528.647919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32121.438599, 18932.443832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42691.082000, 18332.490000, 2165.792062, 2165.792062, 0.000000, X, Y) && !ellipse(29469.371000, 18381.895260, 410.240794, 410.240794, 0.000000, X, Y) && !ellipse(42949.314484, 17944.001648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43304.326416, 17421.360458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43560.472000, 16883.456000, 1393.296040, 1393.296040, 0.000000, X, Y) && !ellipse(43973.640717, 16062.882858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34534.000000, 14506.964005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36782.634000, 28370.648000, 1814.872052, 1814.872052, 0.000000, X, Y) && !ellipse(29592.000153, 24377.031433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32228.582306, 22749.888763, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 22:06:49 2013] Writing fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src1.gif
[Fri May  3 22:06:50 2013] ../../xmm0109480401/products/events/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0109480401/products/events/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri May  3 22:06:50 2013] Mean detx,y = (-12177.21, -4577.55) 
[Fri May  3 22:06:50 2013] ../../xmm0109480401/products/images/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src1_src.img and ../../xmm0109480401/products/images/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri May  3 22:06:50 2013] ../../xmm0109480401/products/spectra/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src1_src.pi and ../../xmm0109480401/products/spectra/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri May  3 22:06:50 2013] Setting source spectrum file to fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri May  3 22:06:50 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May  3 22:06:50 2013] ../../xmm0109480401/products/lightcurves/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0109480401/products/lightcurves/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri May  3 22:12:37 2013] Updating aperture counts using extracted products
[Fri May  3 22:12:37 2013] Total counts from fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src1_src.pi.gz = 72454.00
[Fri May  3 22:12:37 2013] Total counts from fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 35013.00
[Fri May  3 22:12:37 2013] Got source and background scale factors 4415105.000000, 182369201.000000
[Fri May  3 22:12:37 2013] User source parameters:
  Position = (444.1, 298.5) = 12 42 50.38 -63 3 30.9
  Extent = 6.8 (6.8-6.9)", rotation angle = 0
  Source aperture counts = 71606.3 +/- 270.2
  Background aperture counts = 847.7
  Rate = 2 +/- 0.006

[Fri May  3 22:12:43 2013] No arf file for this source, not re-computing flux
[Fri May  3 22:12:52 2013] Source 1 has no response, skipping
[Fri May  3 22:12:53 2013] xmm0109480401/analysis//spectral/fullrun_pn_xmm0109480401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete