[Fri May 3 22:05:35 2013] Detection parameters: Position = (368.5, 250.2) = 12 43 38.69 -63 7 5.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 41.6 +/- 10.0 Background counts = 19.4 Rate = 0.001 +/- 0.0003 [Fri May 3 22:05:35 2013] Off-axis axis estimate = 6.16' [Fri May 3 22:05:59 2013] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting [Fri May 3 22:05:59 2013] Initial guess for spatial extent in simple fitting = 9.51" [Fri May 3 22:05:59 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.866 [Fri May 3 22:05:59 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.51" [Fri May 3 22:06:00 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_src25.ximg exists [Fri May 3 22:06:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_src25.csv [Fri May 3 22:06:00 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_src25_1.ximg exists [Fri May 3 22:06:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_src25.csv [Fri May 3 22:06:00 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_src25_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 22:06:00 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists [Fri May 3 22:06:00 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists [Fri May 3 22:06:00 2013] Fit fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly [Fri May 3 22:06:15 2013] Warning, spatial fit 25 centroid is now closest to src. 24 [Fri May 3 22:06:15 2013] Vigneting correction estimate = 1.000000 [Fri May 3 22:06:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 22:06:15 2013] Assessing source extent using major [Fri May 3 22:06:15 2013] Source does appear to be extended [Fri May 3 22:06:15 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 3 22:06:15 2013] Source is confused with source 24 [Fri May 3 22:06:27 2013] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting [Fri May 3 22:06:27 2013] Initial guess for spatial extent in simple fitting = 9.51" [Fri May 3 22:06:27 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.866 [Fri May 3 22:06:27 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 9.51" [Fri May 3 22:06:27 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src25.ximg exists [Fri May 3 22:06:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src25.csv [Fri May 3 22:06:27 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src25_1.ximg exists [Fri May 3 22:06:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src25.csv [Fri May 3 22:06:27 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src25_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 22:06:28 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src25.ximg exists [Fri May 3 22:06:28 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists [Fri May 3 22:06:28 2013] Fit fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly [Fri May 3 22:06:40 2013] Source 25 is offset by -0.168452 and -2.576978 pixels which is larger than 2 X fitted extent = 1.698846 x 1.698846, not incorporating fit results [Fri May 3 22:06:40 2013] Source 25 is offset by -4.848866 and 6.006632 pixels which is larger than 2 X fitted extent = 3.047177 x 3.047177, not incorporating fit results [Fri May 3 22:06:40 2013] Source 25 is offset by -4.759509 and 6.011160 pixels which is larger than 2 X fitted extent = 2.150713 x 2.150713, not incorporating fit results [Fri May 3 22:06:40 2013] Vigneting correction estimate = 1.000000 [Fri May 3 22:06:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 22:06:40 2013] Assessing source extent using major [Fri May 3 22:06:40 2013] Source does appear to be extended [Fri May 3 22:06:40 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 3 22:07:05 2013] XMMSAS src. selection expression = ellipse(32009.170685, 21722.272949, 652.500000, 652.500000, 0.000000, X, Y) [Fri May 3 22:07:05 2013] Not overwriting source region fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src25_src.reg [Fri May 3 22:07:05 2013] Extracting stamp from image fullrun_mos2_xmm0109480401_pi300-10000_cl_sm2.00.img.gz, (331, 213) - (406, 288) [Fri May 3 22:07:05 2013] XMMSAS bgd. selection expression = annulus(32009.170685, 21722.272949, 1087.500000, 2175.000000, X, Y) && !ellipse(30338.304000, 23798.660000, 353.716010, 353.716010, 0.000000, X, Y) && !ellipse(31053.694979, 23013.162749, 1825.250482, 477.420945, 36.479851, X, Y) && !ellipse(31339.316000, 22742.874000, 1414.864041, 1414.864041, 0.000000, X, Y) && !ellipse(31707.876000, 22112.850000, 1496.896043, 1496.896043, 0.000000, X, Y) [Fri May 3 22:07:05 2013] Writing fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src25.gif [Fri May 3 22:07:09 2013] Mean detx,y = (4587.38, 4892.96) [Fri May 3 22:07:09 2013] Setting backscal keywords in source and bgd. spectrum [Fri May 3 22:07:19 2013] Binned source spectrum to 10 counts/bin [Fri May 3 22:07:20 2013] Setting source spectrum file to fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src25_src_b10.pi.gz [Fri May 3 22:07:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src25_bgd.pi.gz [Fri May 3 22:08:34 2013] Not generating rmf since there are only 41 counts [Fri May 3 22:08:34 2013] rmf not generated due to insufficient counts [Fri May 3 22:12:48 2013] Updating aperture counts using extracted products [Fri May 3 22:12:48 2013] Total counts from fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 237.00 [Fri May 3 22:12:48 2013] Total counts from fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src25_bgd.pi.gz = 582.00 [Fri May 3 22:12:48 2013] Got source and background scale factors 1336000.000000, 5747172.000000 [Fri May 3 22:12:48 2013] User source parameters: Position = (368.5, 250.2) = 12 43 38.69 -63 7 5.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 101.7 +/- 16.4 Background aperture counts = 135.3 Rate = 0.002 +/- 0.0003 [Fri May 3 22:12:48 2013] Updating counts from extracted products [Fri May 3 22:12:48 2013] Set source signif. to 101.71/11.63 = 8.74 [Fri May 3 22:12:48 2013] Calculating source flux in energy range 0.30-8.00 [Fri May 3 22:12:48 2013] Using photon index=1.80, rate=0.00213, arf fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src25.arf [Fri May 3 22:12:48 2013] Assuming count rate is from the 0.30-10.00 bandpass [Fri May 3 22:12:48 2013] Updating source flux to 6.2e-14 [Fri May 3 22:12:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Fri May 3 22:12:52 2013] xmm0109480401/analysis//spectral/fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete