[Fri May  3 22:05:35 2013] Detection parameters:
  Position = (170.2, 132.2) = 12 45 46.26 -63 15 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.3 +/- 9.9
  Background counts = 11.7
  Rate = 0.001 +/- 0.0002

[Fri May  3 22:05:35 2013] Off-axis axis estimate = 15.22'
[Fri May  3 22:05:59 2013] Using EEF radius (= 14.04 ")to estimate initial spatial extent for simple fitting
[Fri May  3 22:05:59 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 22:05:59 2013] Initial guess for spatial extent in simple fitting = 14.04"
[Fri May  3 22:05:59 2013] source mask rpix=3.2, npix_max = 55, mask sum = 59, frac = 1.062
[Fri May  3 22:05:59 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 14.04"
[Fri May  3 22:06:00 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_src28.ximg exists
[Fri May  3 22:06:00 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri May  3 22:06:00 2013] Fit fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_src28 appears to have run properly
[Fri May  3 22:06:00 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri May  3 22:06:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri May  3 22:06:00 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri May  3 22:06:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri May  3 22:06:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:06:15 2013] Spatial fit model total counts = 142.037000, observed total counts = 132.000000
[Fri May  3 22:06:15 2013] Offset between fit and detection position for source 17 = 1.004047 pixels
[Fri May  3 22:06:15 2013] 145.643200 total counts/ 92.841000 bgd. counts: snr = 5.480020
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.004047 pixels
  Position = (170.9, 131.5) = 12 45 45.80 -63 15 38.0
  Extent = 11.3 (8.5-16.1)" x 5.7 (4.2-8.0)", rotation angle = 226 (190-246) degrees
  Source counts = 52.8 +/- 12.1
  Background counts = 92.8
  Rate = 0.001 +/- 0.0003
[Fri May  3 22:06:15 2013] Vigneting correction estimate = 1.000000
[Fri May  3 22:06:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 22:06:15 2013] Assessing source extent using major axis lower bound
[Fri May  3 22:06:15 2013] Source does appear to be extended
[Fri May  3 22:06:15 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.06
[Fri May  3 22:06:27 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 22:06:27 2013] Initial guess for spatial extent in simple fitting = 8.50"
[Fri May  3 22:06:27 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.039
[Fri May  3 22:06:27 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 8.50"
[Fri May  3 22:06:27 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src27.ximg exists
[Fri May  3 22:06:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src27.csv
[Fri May  3 22:06:27 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri May  3 22:06:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src27.csv
[Fri May  3 22:06:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:06:28 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri May  3 22:06:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri May  3 22:06:28 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri May  3 22:06:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri May  3 22:06:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:06:40 2013] Warning, spatial fit 27 centroid is now closest to src. 29
[Fri May  3 22:06:40 2013] Vigneting correction estimate = 1.000000
[Fri May  3 22:06:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 22:06:40 2013] Assessing source extent using major axis lower bound
[Fri May  3 22:06:40 2013] Source does appear to be extended
[Fri May  3 22:06:40 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.06
[Fri May  3 22:07:05 2013] XMMSAS src. selection expression = ellipse(14822.346800, 11388.882200, 679.188020, 340.267210, 226.243480, X, Y)
[Fri May  3 22:07:05 2013] Not overwriting source region fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src17_src.reg
[Fri May  3 22:07:05 2013] Extracting stamp from image fullrun_mos2_xmm0109480401_pi300-10000_cl_sm2.00.img.gz, (132, 92) - (210, 170)
[Fri May  3 22:07:05 2013] XMMSAS bgd. selection expression = annulus(14822.346800, 11388.882200, 1131.980033, 2263.960065, X, Y)
[Fri May  3 22:07:05 2013] Writing fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src17.gif
[Fri May  3 22:08:07 2013] Mean detx,y = (-15401.89, 5910.63) 
[Fri May  3 22:08:07 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 22:08:18 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 22:08:18 2013] Setting source spectrum file to fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri May  3 22:08:18 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri May  3 22:11:59 2013] Not generating rmf since there are only 52 counts
[Fri May  3 22:11:59 2013] rmf not generated due to insufficient counts
[Fri May  3 22:12:48 2013] Updating aperture counts using extracted products
[Fri May  3 22:12:48 2013] Total counts from fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 63.00
[Fri May  3 22:12:48 2013] Total counts from fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src17_bgd.pi.gz = 319.00
[Fri May  3 22:12:48 2013] Got source and background scale factors 577696.000000, 4751771.000000
[Fri May  3 22:12:48 2013] User source parameters:
  Position = (170.9, 131.5) = 12 45 45.80 -63 15 38.0
  Extent = 11.3 (8.5-16.1)" x 5.7 (4.2-8.0)", rotation angle = 226 (190-246) degrees
  Source aperture counts = 24.2 +/- 9.0
  Background aperture counts = 38.8
  Rate = 0.0005 +/- 0.0002

[Fri May  3 22:12:48 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 22:12:48 2013] Using photon index=1.80, rate=0.00111, arf fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src17.arf
[Fri May  3 22:12:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  3 22:12:48 2013] Updating source flux to 7.5e-14
[Fri May  3 22:12:51 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May  3 22:12:52 2013] xmm0109480401/analysis//spectral/fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete