[Fri May  3 22:05:35 2013] Detection parameters:
  Position = (311.5, 127.6) = 12 44 15.19 -63 15 56.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.7 +/- 11.4
  Background counts = 13.1
  Rate = 0.001 +/- 0.0002

[Fri May  3 22:05:35 2013] Off-axis axis estimate = 12.42'
[Fri May  3 22:05:59 2013] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Fri May  3 22:05:59 2013] Initial guess for spatial extent in simple fitting = 12.64"
[Fri May  3 22:05:59 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.056
[Fri May  3 22:05:59 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 12.64"
[Fri May  3 22:06:00 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_src24.ximg exists
[Fri May  3 22:06:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_src24.csv
[Fri May  3 22:06:00 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri May  3 22:06:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_src24.csv
[Fri May  3 22:06:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:06:00 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri May  3 22:06:00 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri May  3 22:06:00 2013] Fit fullrun_mos2_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Fri May  3 22:06:15 2013] Spatial fit model total counts = 233.902000, observed total counts = 234.000000
[Fri May  3 22:06:15 2013] Offset between fit and detection position for source 13 = 0.165110 pixels
[Fri May  3 22:06:15 2013] 235.778100 total counts/ 188.918000 bgd. counts: snr = 3.409310
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.165110 pixels
  Position = (311.7, 127.6) = 12 44 15.09 -63 15 56.2
  Extent = 6.9 (4.7-9.9)", rotation angle = 0
  Source counts = 46.9 +/- 15.4
  Background counts = 188.9
  Rate = 0.001 +/- 0.0003
[Fri May  3 22:06:15 2013] Vigneting correction estimate = 1.000000
[Fri May  3 22:06:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 22:06:15 2013] Assessing source extent using major axis lower bound
[Fri May  3 22:06:15 2013] Source does appear to be extended
[Fri May  3 22:06:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 22:06:27 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 22:06:27 2013] Initial guess for spatial extent in simple fitting = 6.95"
[Fri May  3 22:06:27 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.909
[Fri May  3 22:06:27 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 6.95"
[Fri May  3 22:06:27 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src24.ximg exists
[Fri May  3 22:06:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src24.csv
[Fri May  3 22:06:27 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri May  3 22:06:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src24.csv
[Fri May  3 22:06:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:06:28 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri May  3 22:06:28 2013] fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri May  3 22:06:28 2013] Fit fullrun_mos2_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Fri May  3 22:06:40 2013] Warning, spatial fit 24 centroid is now closest to src. 30
[Fri May  3 22:06:40 2013] Vigneting correction estimate = 1.000000
[Fri May  3 22:06:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 22:06:40 2013] Assessing source extent using major axis lower bound
[Fri May  3 22:06:40 2013] Source does appear to be extended
[Fri May  3 22:06:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 22:07:05 2013] XMMSAS src. selection expression = ellipse(27066.510400, 11055.692000, 416.905812, 416.905812, 0.000000, X, Y)
[Fri May  3 22:07:05 2013] Not overwriting source region fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src13_src.reg
[Fri May  3 22:07:05 2013] Extracting stamp from image fullrun_mos2_xmm0109480401_pi300-10000_cl_sm2.00.img.gz, (288, 104) - (336, 152)
[Fri May  3 22:07:05 2013] XMMSAS bgd. selection expression = annulus(27066.510400, 11055.692000, 694.843020, 1389.686040, X, Y) && !ellipse(25083.871918, 13085.118820, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 22:07:05 2013] Writing fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src13.gif
[Fri May  3 22:07:06 2013] ../../xmm0109480401/products/events/fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0109480401/products/events/fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Fri May  3 22:07:06 2013] Mean detx,y = (-4779.63, 12020.12) 
[Fri May  3 22:07:06 2013] ../../xmm0109480401/products/images/fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src13_src.img and ../../xmm0109480401/products/images/fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Fri May  3 22:07:06 2013] ../../xmm0109480401/products/spectra/fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src13_src.pi and ../../xmm0109480401/products/spectra/fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Fri May  3 22:07:06 2013] Setting source spectrum file to fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src13_src.pi.gz
[Fri May  3 22:07:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri May  3 22:08:34 2013] Not generating rmf since there are only 46 counts
[Fri May  3 22:08:34 2013] rmf not generated due to insufficient counts
[Fri May  3 22:12:47 2013] Updating aperture counts using extracted products
[Fri May  3 22:12:47 2013] Total counts from fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src13_src.pi.gz = 86.00
[Fri May  3 22:12:48 2013] Total counts from fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src13_bgd.pi.gz = 329.00
[Fri May  3 22:12:48 2013] Got source and background scale factors 552000.000000, 4545600.000000
[Fri May  3 22:12:48 2013] User source parameters:
  Position = (311.7, 127.6) = 12 44 15.09 -63 15 56.2
  Extent = 6.9 (4.7-9.9)", rotation angle = 0
  Source aperture counts = 46.0 +/- 10.3
  Background aperture counts = 40.0
  Rate = 0.001 +/- 0.0002

[Fri May  3 22:12:48 2013] No arf file for this source, not re-computing flux
[Fri May  3 22:12:51 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May  3 22:12:52 2013] xmm0109480401/analysis//spectral/fullrun_mos2_xmm0109480401_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete