[Fri May  3 22:05:34 2013] Detection parameters:
  Position = (266.5, 94.5) = 12 44 44.24 -63 18 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.3 +/- 7.9
  Background counts = 10.4
  Rate = 0.0007 +/- 0.0002

[Fri May  3 22:05:34 2013] Off-axis axis estimate = 14.97'
[Fri May  3 22:05:58 2013] Using EEF radius (= 13.91 ")to estimate initial spatial extent for simple fitting
[Fri May  3 22:05:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 22:05:58 2013] Initial guess for spatial extent in simple fitting = 13.91"
[Fri May  3 22:05:58 2013] source mask rpix=3.2, npix_max = 54, mask sum = 44, frac = 0.804
[Fri May  3 22:05:58 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 13.91"
[Fri May  3 22:05:59 2013] fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_src32.ximg exists
[Fri May  3 22:05:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_src32.csv
[Fri May  3 22:05:59 2013] fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_src32_1.ximg exists
[Fri May  3 22:05:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_src32.csv
[Fri May  3 22:05:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:05:59 2013] fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Fri May  3 22:05:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src32.csv
[Fri May  3 22:05:59 2013] fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Fri May  3 22:05:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src32.csv
[Fri May  3 22:05:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:06:08 2013] Warning, spatial fit 23 centroid is now closest to src. 24
[Fri May  3 22:06:08 2013] Warning, spatial fit 26 centroid is now closest to src. 28
[Fri May  3 22:06:08 2013] Warning, spatial fit 30 centroid is now closest to src. 34
[Fri May  3 22:06:08 2013] Warning, spatial fit 34 centroid is now closest to src. 35
[Fri May  3 22:06:08 2013] Warning, spatial fit 43 centroid is now closest to src. 6
[Fri May  3 22:06:12 2013] Warning, spatial fit 18 centroid is now closest to src. 15
[Fri May  3 22:06:12 2013] Spatial fit model total counts = 212.080000, observed total counts = 160.000000
[Fri May  3 22:06:12 2013] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 22:06:12 2013] Vigneting correction estimate = 1.000000
[Fri May  3 22:06:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 22:06:12 2013] Assessing source extent using major
[Fri May  3 22:06:12 2013] Source does appear to be extended
[Fri May  3 22:06:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 22:06:12 2013] Deleting source due to low Poisson probability 0.9