[Fri May  3 22:05:33 2013] Detection parameters:
  Position = (444.3, 298.8) = 12 42 50.23 -63 3 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31400.0 +/- 209.9
  Background counts = 19.9
  Rate = 0.7 +/- 0.004

[Fri May  3 22:05:34 2013] Off-axis axis estimate = 10.58'
[Fri May  3 22:05:58 2013] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Fri May  3 22:05:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 22:05:58 2013] Initial guess for spatial extent in simple fitting = 11.72"
[Fri May  3 22:05:58 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.029
[Fri May  3 22:05:58 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.72"
[Fri May  3 22:05:58 2013] fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_src1.ximg exists
[Fri May  3 22:05:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_src1.csv
[Fri May  3 22:05:58 2013] fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May  3 22:05:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_src1.csv
[Fri May  3 22:05:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:05:59 2013] fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May  3 22:05:59 2013] fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May  3 22:05:59 2013] Fit fullrun_mos1_xmm0109480401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May  3 22:06:12 2013] Spatial fit model total counts = 29608.500000, observed total counts = 29626.000000
[Fri May  3 22:06:12 2013] Offset between fit and detection position for source 1 = 0.350279 pixels
[Fri May  3 22:06:12 2013] 29542.560000 total counts/ 5399.560000 bgd. counts: snr = 328.558002
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.350279 pixels
  Position = (444.1, 298.6) = 12 42 50.42 -63 3 30.4
  Extent = 7.0 (6.9-7.0)", rotation angle = 0
  Source counts = 24143.0 +/- 171.9
  Background counts = 5399.6
  Rate = 0.5 +/- 0.004
[Fri May  3 22:06:12 2013] Vigneting correction estimate = 1.000000
[Fri May  3 22:06:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 22:06:12 2013] Assessing source extent using major axis lower bound
[Fri May  3 22:06:12 2013] Source does appear to be extended
[Fri May  3 22:06:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 22:06:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 22:06:26 2013] Initial guess for spatial extent in simple fitting = 6.98"
[Fri May  3 22:06:26 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.904
[Fri May  3 22:06:26 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 6.98"
[Fri May  3 22:06:26 2013] fullrun_mos1_xmm0109480401_pi300-10000_cl_pass1_src1.ximg exists
[Fri May  3 22:06:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109480401_pi300-10000_cl_pass1_src1.csv
[Fri May  3 22:06:26 2013] fullrun_mos1_xmm0109480401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May  3 22:06:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109480401_pi300-10000_cl_pass1_src1.csv
[Fri May  3 22:06:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109480401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109480401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:06:27 2013] fullrun_mos1_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May  3 22:06:27 2013] fullrun_mos1_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May  3 22:06:27 2013] Fit fullrun_mos1_xmm0109480401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May  3 22:06:37 2013] Spatial fit model total counts = 28121.000000, observed total counts = 28121.000000
[Fri May  3 22:06:37 2013] Offset between fit and detection position for source 1 = 0.013775 pixels
[Fri May  3 22:06:37 2013] 28062.150000 total counts/ 5087.250000 bgd. counts: snr = 322.115846
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.013775 pixels
  Position = (444.1, 298.6) = 12 42 50.41 -63 3 30.4
  Extent = 6.5 (6.4-6.6)", rotation angle = 0
  Source counts = 22974.9 +/- 167.5
  Background counts = 5087.2
  Rate = 0.5 +/- 0.004
[Fri May  3 22:06:37 2013] Vigneting correction estimate = 1.000000
[Fri May  3 22:06:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 22:06:37 2013] Assessing source extent using major axis lower bound
[Fri May  3 22:06:37 2013] Source does appear to be extended
[Fri May  3 22:06:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 22:07:01 2013] Counts = 22974.900000, rescaling region sizes by 3.000000
[Fri May  3 22:07:01 2013] XMMSAS src. selection expression = ellipse(38585.413460, 25932.850800, 1172.257234, 1172.257234, 0.000000, X, Y)
[Fri May  3 22:07:01 2013] Not overwriting source region fullrun_mos1_xmm0109480401_pi300-10000_pass1_cl_src1_src.reg
[Fri May  3 22:07:01 2013] Extracting stamp from image fullrun_mos1_xmm0109480401_pi300-10000_cl_sm2.00.img.gz, (377, 231) - (511, 366)
[Fri May  3 22:07:01 2013] XMMSAS bgd. selection expression = annulus(38585.413460, 25932.850800, 5861.286169, 11722.572337, X, Y) && !ellipse(30265.646000, 23852.230987, 591.978237, 255.999608, 69.535295, X, Y) && !ellipse(31181.842316, 28078.312195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32127.916870, 18852.316376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31136.604000, 22974.064000, 1458.520042, 394.201611, 35.169000, X, Y) && !ellipse(34427.344818, 14386.535858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29451.177399, 18356.769760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29591.349670, 24374.517120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38468.389679, 24148.382965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41166.860565, 29891.394531, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 22:07:01 2013] Writing fullrun_mos1_xmm0109480401_pi300-10000_pass1_cl_src1.gif
[Fri May  3 22:07:01 2013] ../../xmm0109480401/products/events/fullrun_mos1_xmm0109480401_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0109480401/products/events/fullrun_mos1_xmm0109480401_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri May  3 22:07:01 2013] Mean detx,y = (4592.92, -12514.33) 
[Fri May  3 22:07:01 2013] ../../xmm0109480401/products/images/fullrun_mos1_xmm0109480401_pi300-10000_pass1_cl_src1_src.img and ../../xmm0109480401/products/images/fullrun_mos1_xmm0109480401_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri May  3 22:07:01 2013] ../../xmm0109480401/products/spectra/fullrun_mos1_xmm0109480401_pi300-10000_pass1_cl_src1_src.pi and ../../xmm0109480401/products/spectra/fullrun_mos1_xmm0109480401_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri May  3 22:07:01 2013] Setting source spectrum file to fullrun_mos1_xmm0109480401_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri May  3 22:07:01 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109480401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May  3 22:07:01 2013] ../../xmm0109480401/products/lightcurves/fullrun_mos1_xmm0109480401_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0109480401/products/lightcurves/fullrun_mos1_xmm0109480401_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri May  3 22:12:43 2013] Updating aperture counts using extracted products
[Fri May  3 22:12:43 2013] Total counts from fullrun_mos1_xmm0109480401_pi300-10000_pass1_cl_src1_src.pi.gz = 30111.00
[Fri May  3 22:12:43 2013] Total counts from fullrun_mos1_xmm0109480401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 12722.00
[Fri May  3 22:12:43 2013] Got source and background scale factors 4332800.000000, 154423519.000000
[Fri May  3 22:12:43 2013] User source parameters:
  Position = (444.1, 298.6) = 12 42 50.41 -63 3 30.4
  Extent = 6.5 (6.4-6.6)", rotation angle = 0
  Source aperture counts = 29754.0 +/- 174.5
  Background aperture counts = 357.0
  Rate = 0.6 +/- 0.004

[Fri May  3 22:12:45 2013] No arf file for this source, not re-computing flux
[Fri May  3 22:12:49 2013] Source 1 has no response, skipping
[Fri May  3 22:12:50 2013] xmm0109480401/analysis//spectral/fullrun_mos1_xmm0109480401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete