[Sat May 26 12:35:41 2012] Detection parameters:
  Position = (234.4, 263.9) = 10 41 54.94 -59 41 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.7 +/- 17.8
  Background counts = 14.0
  Rate = 0.02 +/- 0.002

[Sat May 26 12:35:41 2012] Off-axis axis estimate = 5.28'
[Sat May 26 13:05:58 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Sat May 26 13:05:58 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Sat May 26 13:05:58 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.123
[Sat May 26 13:05:58 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.07"
[Sat May 26 13:13:37 2012] fullrun_mos2_xmm0109470701_pi300-10000_cl_pass0_src2.ximg exists
[Sat May 26 13:13:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470701_pi300-10000_cl_pass0_src2.csv
[Sat May 26 13:13:37 2012] fullrun_mos2_xmm0109470701_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat May 26 13:13:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470701_pi300-10000_cl_pass0_src2.csv
[Sat May 26 13:13:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109470701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109470701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 13:13:37 2012] fullrun_mos2_xmm0109470701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat May 26 13:13:37 2012] fullrun_mos2_xmm0109470701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat May 26 13:13:37 2012] Fit fullrun_mos2_xmm0109470701_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat May 26 13:13:43 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.344410 pixels away
[Sat May 26 13:13:43 2012] Vigneting correction estimate = 1.000000
[Sat May 26 13:13:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 13:13:43 2012] Assessing source extent using major
[Sat May 26 13:13:43 2012] Source does appear to be extended
[Sat May 26 13:13:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 13:38:09 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Sat May 26 13:38:09 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Sat May 26 13:38:09 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.123
[Sat May 26 13:38:09 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.07"
[Sat May 26 13:46:09 2012] fullrun_mos2_xmm0109470701_pi300-10000_cl_pass1_src2.ximg exists
[Sat May 26 13:46:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470701_pi300-10000_cl_pass1_src2.csv
[Sat May 26 13:46:09 2012] fullrun_mos2_xmm0109470701_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat May 26 13:46:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470701_pi300-10000_cl_pass1_src2.csv
[Sat May 26 13:46:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109470701_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109470701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 13:46:09 2012] fullrun_mos2_xmm0109470701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat May 26 13:46:09 2012] fullrun_mos2_xmm0109470701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat May 26 13:46:09 2012] Fit fullrun_mos2_xmm0109470701_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat May 26 13:46:14 2012] Spatial fit model total counts = 282.335000, observed total counts = 282.000000
[Sat May 26 13:46:14 2012] Offset between fit and detection position for source 1 = 0.121345 pixels
[Sat May 26 13:46:14 2012] 286.390000 total counts/ 156.164000 bgd. counts: snr = 10.420948
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.121345 pixels
  Position = (234.3, 263.8) = 10 41 54.99 -59 41 22.4
  Extent = 4.6 (4.0-5.4)", rotation angle = 0
  Source counts = 130.2 +/- 16.9
  Background counts = 156.2
  Rate = 0.01 +/- 0.001
[Sat May 26 13:46:14 2012] Vigneting correction estimate = 1.000000
[Sat May 26 13:46:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 13:46:14 2012] Assessing source extent using major axis lower bound
[Sat May 26 13:46:14 2012] Source does appear to be extended
[Sat May 26 13:46:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 14:07:06 2012] XMMSAS src. selection expression = ellipse(20334.559400, 22906.021200, 278.920208, 278.920208, 0.000000, X, Y)
[Sat May 26 14:07:06 2012] Writing source region out to fullrun_mos2_xmm0109470701_pi300-10000_pass1_cl_src1_src.reg
[Sat May 26 14:07:06 2012] Extracting stamp from image fullrun_mos2_xmm0109470701_pi300-10000_cl_sm2.00.img.gz, (218, 248) - (250, 280)
[Sat May 26 14:07:06 2012] XMMSAS bgd. selection expression = annulus(20334.559400, 22906.021200, 464.867013, 929.734027, X, Y)
[Sat May 26 14:07:06 2012] Writing fullrun_mos2_xmm0109470701_pi300-10000_pass1_cl_src1.gif
[Sat May 26 14:07:19 2012] Mean detx,y = (-5137.12, -2070.89) 
[Sat May 26 14:07:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 14:07:27 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 14:07:27 2012] Setting source spectrum file to fullrun_mos2_xmm0109470701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 26 14:07:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109470701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May 26 14:16:52 2012] Updating aperture counts using extracted products
[Sat May 26 14:16:52 2012] Error reading totcts from fullrun_mos2_xmm0109470701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 26 14:16:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 14:16:52 2012] Using photon index=1.80, rate=0.0106, arf fullrun_mos2_xmm0109470701_pi300-10000_pass1_cl_src1.arf
[Sat May 26 14:16:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 14:16:52 2012] Updating source flux to 1.9e-13