[Sun Jun  3 01:16:29 2012] Detection parameters:
  Position = (392.7, 435.8) = 10 40 16.52 -59 32 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 163.7 +/- 17.4
  Background counts = 23.8
  Rate = 0.02 +/- 0.002

[Sun Jun  3 01:16:29 2012] Off-axis axis estimate = 12.08'
[Sun Jun  3 01:18:01 2012] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 01:18:01 2012] Initial guess for spatial extent in simple fitting = 12.47"
[Sun Jun  3 01:18:01 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.081
[Sun Jun  3 01:18:01 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 12.47"
[Sun Jun  3 01:32:48 2012] fullrun_pn_xmm0109470501_pi300-10000_cl_pass0_src12.ximg exists
[Sun Jun  3 01:32:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109470501_pi300-10000_cl_pass0_src12.csv
[Sun Jun  3 01:32:48 2012] fullrun_pn_xmm0109470501_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Jun  3 01:32:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109470501_pi300-10000_cl_pass0_src12.csv
[Sun Jun  3 01:32:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109470501_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109470501_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 01:32:48 2012] fullrun_pn_xmm0109470501_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Jun  3 01:32:48 2012] fullrun_pn_xmm0109470501_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Jun  3 01:32:48 2012] Fit fullrun_pn_xmm0109470501_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Jun  3 01:56:55 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 16.523766 pixels away
[Sun Jun  3 01:56:55 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 01:56:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 01:56:55 2012] Assessing source extent using major
[Sun Jun  3 01:56:55 2012] Source does appear to be extended
[Sun Jun  3 01:56:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 01:57:04 2012] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 01:57:04 2012] Initial guess for spatial extent in simple fitting = 12.47"
[Sun Jun  3 01:57:04 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.081
[Sun Jun  3 01:57:04 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 12.47"
[Sun Jun  3 02:10:43 2012] fullrun_pn_xmm0109470501_pi300-10000_cl_pass1_src12.ximg exists
[Sun Jun  3 02:10:43 2012] fullrun_pn_xmm0109470501_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Jun  3 02:10:43 2012] Fit fullrun_pn_xmm0109470501_pi300-10000_cl_pass1_src12 appears to have run properly
[Sun Jun  3 02:10:43 2012] fullrun_pn_xmm0109470501_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Jun  3 02:10:43 2012] fullrun_pn_xmm0109470501_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Jun  3 02:10:43 2012] Fit fullrun_pn_xmm0109470501_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Jun  3 02:34:20 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 16.744683 pixels away
[Sun Jun  3 02:34:20 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 02:34:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 02:34:20 2012] Assessing source extent using major
[Sun Jun  3 02:34:20 2012] Source does appear to be extended
[Sun Jun  3 02:34:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 02:34:30 2012] XMMSAS src. selection expression = ellipse(34119.233978, 37870.360260, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  3 02:34:30 2012] Writing source region out to fullrun_pn_xmm0109470501_pi300-10000_pass1_cl_src12_src.reg
[Sun Jun  3 02:34:30 2012] Extracting stamp from image fullrun_pn_xmm0109470501_pi300-10000_cl_sm2.00.img.gz, (355, 398) - (430, 473)
[Sun Jun  3 02:34:30 2012] XMMSAS bgd. selection expression = annulus(34119.233978, 37870.360260, 1087.500000, 2175.000000, X, Y)
[Sun Jun  3 02:34:30 2012] Writing fullrun_pn_xmm0109470501_pi300-10000_pass1_cl_src12.gif
[Sun Jun  3 02:39:36 2012] Mean detx,y = (12994.72, 4844.15) 
[Sun Jun  3 02:39:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 02:39:55 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 02:39:55 2012] Setting source spectrum file to fullrun_pn_xmm0109470501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Jun  3 02:39:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109470501_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun Jun  3 02:51:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  3 02:51:07 2012] rmf not generated due to insufficient counts
[Sun Jun  3 03:06:02 2012] Updating aperture counts using extracted products
[Sun Jun  3 03:06:02 2012] Error reading totcts from fullrun_pn_xmm0109470501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Jun  3 03:06:02 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 03:06:02 2012] Using photon index=1.80, rate=0.0165, arf fullrun_pn_xmm0109470501_pi300-10000_pass1_cl_src12.arf
[Sun Jun  3 03:06:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 03:06:02 2012] Updating source flux to 1.2e-13
[Sun Jun  3 03:06:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting