[Sun Jun  3 01:17:02 2012] Detection parameters:
  Position = (202.4, 377.1) = 10 42 5.52 -59 36 17.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.3 +/- 10.1
  Background counts = 9.3
  Rate = 0.007 +/- 0.001

[Sun Jun  3 01:17:02 2012] Off-axis axis estimate = 9.00'
[Sun Jun  3 01:43:26 2012] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 01:43:26 2012] Initial guess for spatial extent in simple fitting = 10.93"
[Sun Jun  3 01:43:26 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.992
[Sun Jun  3 01:43:26 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.93"
[Sun Jun  3 01:56:52 2012] fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun  3 01:56:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_src5.csv
[Sun Jun  3 01:56:52 2012] fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun  3 01:56:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_src5.csv
[Sun Jun  3 01:56:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 01:56:52 2012] fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun  3 01:56:52 2012] fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun  3 01:56:52 2012] Fit fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Jun  3 01:56:59 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.640060 pixels away
[Sun Jun  3 01:56:59 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 01:56:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 01:56:59 2012] Assessing source extent using major
[Sun Jun  3 01:56:59 2012] Source does appear to be extended
[Sun Jun  3 01:56:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 02:20:54 2012] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 02:20:54 2012] Initial guess for spatial extent in simple fitting = 10.93"
[Sun Jun  3 02:20:54 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.992
[Sun Jun  3 02:20:54 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.93"
[Sun Jun  3 02:34:17 2012] fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun  3 02:34:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_src5.csv
[Sun Jun  3 02:34:17 2012] fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun  3 02:34:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_src5.csv
[Sun Jun  3 02:34:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 02:34:17 2012] fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun  3 02:34:17 2012] fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun  3 02:34:17 2012] Fit fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Jun  3 02:34:24 2012] Spatial fit model total counts = 149.433000, observed total counts = 148.000000
[Sun Jun  3 02:34:24 2012] Offset between fit and detection position for source 5 = 0.259329 pixels
[Sun Jun  3 02:34:24 2012] 148.929200 total counts/ 99.120600 bgd. counts: snr = 5.002906
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.259329 pixels
  Position = (202.5, 377.3) = 10 42 5.45 -59 36 19.0
  Extent = 7.9 (6.0-12.1)", rotation angle = 0
  Source counts = 49.8 +/- 12.2
  Background counts = 99.1
  Rate = 0.004 +/- 0.001
[Sun Jun  3 02:34:24 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 02:34:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 02:34:24 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 02:34:24 2012] Source does appear to be extended
[Sun Jun  3 02:34:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 02:57:31 2012] XMMSAS src. selection expression = ellipse(17568.262800, 32776.027000, 476.084414, 476.084414, 0.000000, X, Y)
[Sun Jun  3 02:57:31 2012] Writing source region out to fullrun_mos2_xmm0109470501_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun  3 02:57:31 2012] Extracting stamp from image fullrun_mos2_xmm0109470501_pi300-10000_cl_sm2.00.img.gz, (175, 350) - (230, 405)
[Sun Jun  3 02:57:31 2012] XMMSAS bgd. selection expression = annulus(17568.262800, 32776.027000, 793.474023, 1586.948046, X, Y)
[Sun Jun  3 02:57:31 2012] Writing fullrun_mos2_xmm0109470501_pi300-10000_pass1_cl_src5.gif
[Sun Jun  3 02:58:33 2012] Mean detx,y = (-2132.40, 8638.87) 
[Sun Jun  3 02:58:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 02:58:42 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 02:58:42 2012] Setting source spectrum file to fullrun_mos2_xmm0109470501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun  3 02:58:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109470501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun  3 03:05:02 2012] Not generating rmf since there are only 49 counts
[Sun Jun  3 03:05:02 2012] rmf not generated due to insufficient counts
[Sun Jun  3 03:06:02 2012] Updating aperture counts using extracted products
[Sun Jun  3 03:06:02 2012] Error reading totcts from fullrun_mos2_xmm0109470501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun  3 03:06:03 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 03:06:03 2012] Using photon index=1.80, rate=0.004, arf fullrun_mos2_xmm0109470501_pi300-10000_pass1_cl_src5.arf
[Sun Jun  3 03:06:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 03:06:03 2012] Updating source flux to 8.8e-14
[Sun Jun  3 03:06:09 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting