[Sun Jun  3 01:17:02 2012] Detection parameters:
  Position = (348.7, 431.2) = 10 40 41.68 -59 32 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.7 +/- 10.8
  Background counts = 10.7
  Rate = 0.009 +/- 0.002

[Sun Jun  3 01:17:02 2012] Off-axis axis estimate = 10.29'
[Sun Jun  3 01:43:26 2012] Using EEF radius (= 11.57 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 01:43:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  3 01:43:26 2012] Initial guess for spatial extent in simple fitting = 11.57"
[Sun Jun  3 01:43:26 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.901
[Sun Jun  3 01:43:26 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.57"
[Sun Jun  3 01:56:52 2012] fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jun  3 01:56:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_src4.csv
[Sun Jun  3 01:56:52 2012] fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jun  3 01:56:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_src4.csv
[Sun Jun  3 01:56:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 01:56:52 2012] fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jun  3 01:56:52 2012] fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jun  3 01:56:52 2012] Fit fullrun_mos2_xmm0109470501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Jun  3 01:56:59 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.437934 pixels away
[Sun Jun  3 01:56:59 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 01:56:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 01:56:59 2012] Assessing source extent using major
[Sun Jun  3 01:56:59 2012] Source does appear to be extended
[Sun Jun  3 01:56:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 02:20:54 2012] Using EEF radius (= 11.57 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 02:20:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  3 02:20:54 2012] Initial guess for spatial extent in simple fitting = 11.57"
[Sun Jun  3 02:20:54 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.901
[Sun Jun  3 02:20:54 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.57"
[Sun Jun  3 02:34:17 2012] fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_src4.ximg exists
[Sun Jun  3 02:34:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_src4.csv
[Sun Jun  3 02:34:17 2012] fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Jun  3 02:34:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_src4.csv
[Sun Jun  3 02:34:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 02:34:17 2012] fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Jun  3 02:34:17 2012] fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Jun  3 02:34:17 2012] Fit fullrun_mos2_xmm0109470501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Jun  3 02:34:24 2012] Spatial fit model total counts = 178.000000, observed total counts = 178.000000
[Sun Jun  3 02:34:24 2012] Offset between fit and detection position for source 4 = 0.205065 pixels
[Sun Jun  3 02:34:24 2012] 176.388200 total counts/ 141.026000 bgd. counts: snr = 2.977760
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.205065 pixels
  Position = (348.6, 431.1) = 10 40 41.79 -59 32 25.4
  Extent = 4.0 (2.9-5.6)", rotation angle = 0
  Source counts = 35.4 +/- 13.3
  Background counts = 141.0
  Rate = 0.003 +/- 0.001
[Sun Jun  3 02:34:24 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 02:34:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 02:34:24 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 02:34:24 2012] Source does appear to be extended
[Sun Jun  3 02:34:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 02:57:31 2012] XMMSAS src. selection expression = ellipse(30275.900800, 37457.570000, 239.973607, 239.973607, 0.000000, X, Y)
[Sun Jun  3 02:57:31 2012] Writing source region out to fullrun_mos2_xmm0109470501_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun  3 02:57:31 2012] Extracting stamp from image fullrun_mos2_xmm0109470501_pi300-10000_cl_sm2.00.img.gz, (335, 417) - (362, 445)
[Sun Jun  3 02:57:31 2012] XMMSAS bgd. selection expression = annulus(30275.900800, 37457.570000, 399.956012, 799.912023, X, Y)
[Sun Jun  3 02:57:31 2012] Writing fullrun_mos2_xmm0109470501_pi300-10000_pass1_cl_src4.gif
[Sun Jun  3 02:58:24 2012] Mean detx,y = (-11140.31, -1466.31) 
[Sun Jun  3 02:58:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 02:58:31 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 02:58:31 2012] Setting source spectrum file to fullrun_mos2_xmm0109470501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun  3 02:58:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109470501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun  3 03:04:58 2012] Not generating rmf since there are only 35 counts
[Sun Jun  3 03:04:58 2012] rmf not generated due to insufficient counts
[Sun Jun  3 03:06:02 2012] Updating aperture counts using extracted products
[Sun Jun  3 03:06:02 2012] Error reading totcts from fullrun_mos2_xmm0109470501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun  3 03:06:03 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 03:06:03 2012] Using photon index=1.80, rate=0.00284, arf fullrun_mos2_xmm0109470501_pi300-10000_pass1_cl_src4.arf
[Sun Jun  3 03:06:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 03:06:03 2012] Updating source flux to 8.8e-14
[Sun Jun  3 03:06:09 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting