[Sun Jun  3 01:16:45 2012] Detection parameters:
  Position = (286.3, 317.8) = 10 41 17.41 -59 40 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 403.1 +/- 24.5
  Background counts = 11.5
  Rate = 0.03 +/- 0.002

[Sun Jun  3 01:16:46 2012] Off-axis axis estimate = 1.66'
[Sun Jun  3 01:32:48 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 01:32:48 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Sun Jun  3 01:32:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Sun Jun  3 01:32:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Sun Jun  3 01:43:26 2012] fullrun_mos1_xmm0109470501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  3 01:43:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109470501_pi300-10000_cl_pass0_src1.csv
[Sun Jun  3 01:43:26 2012] fullrun_mos1_xmm0109470501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  3 01:43:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109470501_pi300-10000_cl_pass0_src1.csv
[Sun Jun  3 01:43:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109470501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109470501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 01:43:26 2012] fullrun_mos1_xmm0109470501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  3 01:43:26 2012] fullrun_mos1_xmm0109470501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  3 01:43:26 2012] Fit fullrun_mos1_xmm0109470501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun  3 01:56:57 2012] Spatial fit model total counts = 437.000000, observed total counts = 437.000000
[Sun Jun  3 01:56:57 2012] Offset between fit and detection position for source 1 = 0.129046 pixels
[Sun Jun  3 01:56:57 2012] 440.235000 total counts/ 178.203000 bgd. counts: snr = 19.628939
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.129046 pixels
  Position = (286.2, 317.8) = 10 41 17.47 -59 40 38.6
  Extent = 4.5 (4.1-5.0)", rotation angle = 0
  Source counts = 262.0 +/- 21.0
  Background counts = 178.2
  Rate = 0.02 +/- 0.002
[Sun Jun  3 01:56:57 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 01:56:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 01:56:57 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 01:56:57 2012] Source does appear to be extended
[Sun Jun  3 01:56:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 02:10:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  3 02:10:43 2012] Initial guess for spatial extent in simple fitting = 4.54"
[Sun Jun  3 02:10:43 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.944
[Sun Jun  3 02:10:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.54"
[Sun Jun  3 02:20:54 2012] fullrun_mos1_xmm0109470501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  3 02:20:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109470501_pi300-10000_cl_pass1_src1.csv
[Sun Jun  3 02:20:54 2012] fullrun_mos1_xmm0109470501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  3 02:20:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109470501_pi300-10000_cl_pass1_src1.csv
[Sun Jun  3 02:20:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109470501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109470501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 02:20:54 2012] fullrun_mos1_xmm0109470501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  3 02:20:54 2012] fullrun_mos1_xmm0109470501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  3 02:20:54 2012] Fit fullrun_mos1_xmm0109470501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun  3 02:34:22 2012] Spatial fit model total counts = 429.885000, observed total counts = 429.000000
[Sun Jun  3 02:34:22 2012] Offset between fit and detection position for source 1 = 0.021397 pixels
[Sun Jun  3 02:34:22 2012] 431.847000 total counts/ 167.560000 bgd. counts: snr = 20.416939
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.021397 pixels
  Position = (286.3, 317.8) = 10 41 17.46 -59 40 38.6
  Extent = 4.6 (4.2-5.1)", rotation angle = 0
  Source counts = 264.3 +/- 20.8
  Background counts = 167.6
  Rate = 0.02 +/- 0.002
[Sun Jun  3 02:34:22 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 02:34:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 02:34:22 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 02:34:22 2012] Source does appear to be extended
[Sun Jun  3 02:34:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 02:51:17 2012] XMMSAS src. selection expression = ellipse(24855.806200, 27596.433600, 273.371408, 273.371408, 0.000000, X, Y)
[Sun Jun  3 02:51:17 2012] Writing source region out to fullrun_mos1_xmm0109470501_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun  3 02:51:17 2012] Extracting stamp from image fullrun_mos1_xmm0109470501_pi300-10000_cl_sm2.00.img.gz, (271, 302) - (302, 333)
[Sun Jun  3 02:51:17 2012] XMMSAS bgd. selection expression = annulus(24855.806200, 27596.433600, 455.619013, 911.238026, X, Y)
[Sun Jun  3 02:51:17 2012] Writing fullrun_mos1_xmm0109470501_pi300-10000_pass1_cl_src1.gif
[Sun Jun  3 02:51:18 2012] Mean detx,y = (187.05, -181.78) 
[Sun Jun  3 02:51:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 02:51:28 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 02:51:28 2012] Setting source spectrum file to fullrun_mos1_xmm0109470501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun  3 02:51:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109470501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun  3 03:06:02 2012] Updating aperture counts using extracted products
[Sun Jun  3 03:06:02 2012] Error reading totcts from fullrun_mos1_xmm0109470501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun  3 03:06:02 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 03:06:02 2012] Using photon index=1.80, rate=0.0212, arf fullrun_mos1_xmm0109470501_pi300-10000_pass1_cl_src1.arf
[Sun Jun  3 03:06:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 03:06:02 2012] Updating source flux to 3.2e-13
[Sun Jun  3 03:06:09 2012] Reading fit data from xmm0109470501/analysis//spectral/fullrun_mos1_xmm0109470501_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jun  3 03:06:09 2012] Spectral fit parameter nH value = 3.49857e+21
[Sun Jun  3 03:06:09 2012] Spectral fit parameter PhoIndex value = 2.61986
[Sun Jun  3 03:06:09 2012] Failed to get F(0.3-8.0) from xmm0109470501/analysis//spectral/fullrun_mos1_xmm0109470501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jun  3 03:06:09 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 03:06:09 2012] Using Nh = 3.5e+21, photon index=2.62, rate=0.0212, arf fullrun_mos1_xmm0109470501_pi300-10000_pass1_cl_src1.arf
[Sun Jun  3 03:06:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 03:06:09 2012] Updating source flux to 2.8e-13