[Sat Jun  9 10:15:42 2012] Detection parameters:
  Position = (288.6, 319.2) = 10 41 17.33 -59 40 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 491.7 +/- 26.6
  Background counts = 10.3
  Rate = 0.04 +/- 0.002

[Sat Jun  9 10:15:42 2012] Off-axis axis estimate = 1.66'
[Sat Jun  9 11:05:55 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 11:05:55 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Sat Jun  9 11:05:55 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Sat Jun  9 11:05:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Sat Jun  9 11:29:44 2012] fullrun_mos2_xmm0109470301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  9 11:29:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470301_pi300-10000_cl_pass0_src1.csv
[Sat Jun  9 11:29:44 2012] fullrun_mos2_xmm0109470301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  9 11:29:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470301_pi300-10000_cl_pass0_src1.csv
[Sat Jun  9 11:29:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109470301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109470301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 11:29:44 2012] fullrun_mos2_xmm0109470301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  9 11:29:44 2012] fullrun_mos2_xmm0109470301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  9 11:29:44 2012] Fit fullrun_mos2_xmm0109470301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  9 11:29:58 2012] Spatial fit model total counts = 557.005000, observed total counts = 528.000000
[Sat Jun  9 11:29:58 2012] Offset between fit and detection position for source 4 = 0.205747 pixels
[Sat Jun  9 11:29:58 2012] 563.756000 total counts/ 238.616000 bgd. counts: snr = 21.048474
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.205747 pixels
  Position = (288.4, 319.3) = 10 41 17.44 -59 40 39.3
  Extent = 4.6 (4.2-5.1)", rotation angle = 0
  Source counts = 325.1 +/- 23.7
  Background counts = 238.6
  Rate = 0.03 +/- 0.002
[Sat Jun  9 11:29:58 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 11:29:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 11:29:58 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 11:29:58 2012] Source does appear to be extended
[Sat Jun  9 11:29:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 12:26:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 12:26:33 2012] Initial guess for spatial extent in simple fitting = 4.64"
[Sat Jun  9 12:26:33 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.915
[Sat Jun  9 12:26:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.64"
[Sat Jun  9 12:54:26 2012] fullrun_mos2_xmm0109470301_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  9 12:54:26 2012] fullrun_mos2_xmm0109470301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  9 12:54:26 2012] Fit fullrun_mos2_xmm0109470301_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Jun  9 12:54:26 2012] fullrun_mos2_xmm0109470301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  9 12:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun  9 12:54:26 2012] fullrun_mos2_xmm0109470301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  9 12:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun  9 12:54:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109470301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109470301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 12:54:40 2012] Spatial fit model total counts = 555.845000, observed total counts = 528.000000
[Sat Jun  9 12:54:40 2012] Offset between fit and detection position for source 4 = 0.010408 pixels
[Sat Jun  9 12:54:40 2012] 562.471000 total counts/ 236.723000 bgd. counts: snr = 21.171983
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.010408 pixels
  Position = (288.4, 319.2) = 10 41 17.43 -59 40 39.3
  Extent = 5.0 (4.4-5.6)" x 4.3 (3.9-4.8)", rotation angle = 320 (90-90) degrees
  Source counts = 325.7 +/- 23.7
  Background counts = 236.7
  Rate = 0.03 +/- 0.002
[Sat Jun  9 12:54:40 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 12:54:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 12:54:40 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 12:54:40 2012] Source does appear to be extended
[Sat Jun  9 12:54:40 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.92
[Sat Jun  9 13:37:03 2012] XMMSAS src. selection expression = ellipse(25042.480000, 27726.219200, 300.967209, 258.479407, 319.740279, X, Y)
[Sat Jun  9 13:37:03 2012] Writing source region out to fullrun_mos2_xmm0109470301_pi300-10000_pass1_cl_src4_src.reg
[Sat Jun  9 13:37:03 2012] Extracting stamp from image fullrun_mos2_xmm0109470301_pi300-10000_cl_sm2.00.img.gz, (271, 302) - (306, 337)
[Sat Jun  9 13:37:03 2012] XMMSAS bgd. selection expression = annulus(25042.480000, 27726.219200, 501.612014, 1003.224029, X, Y)
[Sat Jun  9 13:37:03 2012] Writing fullrun_mos2_xmm0109470301_pi300-10000_pass1_cl_src4.gif
[Sat Jun  9 13:37:07 2012] Mean detx,y = (-39.78, -35.04) 
[Sat Jun  9 13:37:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 13:37:20 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 13:37:21 2012] Setting source spectrum file to fullrun_mos2_xmm0109470301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun  9 13:37:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109470301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jun  9 13:55:45 2012] Updating aperture counts using extracted products
[Sat Jun  9 13:55:45 2012] Error reading totcts from fullrun_mos2_xmm0109470301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun  9 13:55:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 13:55:46 2012] Using photon index=1.80, rate=0.0262, arf fullrun_mos2_xmm0109470301_pi300-10000_pass1_cl_src4.arf
[Sat Jun  9 13:55:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 13:55:46 2012] Updating source flux to 4.5e-13
[Sat Jun  9 13:56:59 2012] Reading fit data from xmm0109470301/analysis//spectral/fullrun_mos2_xmm0109470301_pi300-10000_pass1_cl_src4_pl.csv
[Sat Jun  9 13:56:59 2012] Spectral fit parameter nH value = 3.14318e+21
[Sat Jun  9 13:56:59 2012] Spectral fit parameter PhoIndex value = 2.75174
[Sat Jun  9 13:56:59 2012] Failed to get F(0.3-8.0) from xmm0109470301/analysis//spectral/fullrun_mos2_xmm0109470301_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Sat Jun  9 13:56:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 13:56:59 2012] Using Nh = 3.1e+21, photon index=2.75, rate=0.0262, arf fullrun_mos2_xmm0109470301_pi300-10000_pass1_cl_src4.arf
[Sat Jun  9 13:56:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 13:56:59 2012] Updating source flux to 3.7e-13