[Tue Jun 12 20:06:51 2012] Detection parameters:
  Position = (293.8, 321.2) = 10 41 17.59 -59 40 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1521.4 +/- 47.1
  Background counts = 26.4
  Rate = 0.2 +/- 0.005

[Tue Jun 12 20:06:51 2012] Off-axis axis estimate = 1.68'
[Tue Jun 12 20:08:13 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 20:08:13 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Tue Jun 12 20:08:13 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Tue Jun 12 20:08:13 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.27"
[Tue Jun 12 20:24:25 2012] fullrun_pn_xmm0109470201_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 12 20:24:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109470201_pi300-10000_cl_pass0_src3.csv
[Tue Jun 12 20:24:26 2012] fullrun_pn_xmm0109470201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 12 20:24:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109470201_pi300-10000_cl_pass0_src3.csv
[Tue Jun 12 20:24:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109470201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109470201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:24:26 2012] fullrun_pn_xmm0109470201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 12 20:24:26 2012] fullrun_pn_xmm0109470201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 12 20:24:26 2012] Fit fullrun_pn_xmm0109470201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jun 12 20:44:50 2012] Spatial fit model total counts = 1586.090000, observed total counts = 1563.000000
[Tue Jun 12 20:44:50 2012] Offset between fit and detection position for source 3 = 0.133555 pixels
[Tue Jun 12 20:44:50 2012] 1588.392000 total counts/ 535.252000 bgd. counts: snr = 45.520493
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.133555 pixels
  Position = (293.8, 321.3) = 10 41 17.62 -59 40 38.1
  Extent = 5.7 (5.4-6.0)", rotation angle = 0
  Source counts = 1053.1 +/- 39.9
  Background counts = 535.3
  Rate = 0.1 +/- 0.004
[Tue Jun 12 20:44:50 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 20:44:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 20:44:50 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 20:44:50 2012] Source does appear to be extended
[Tue Jun 12 20:44:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 20:45:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 20:45:00 2012] Initial guess for spatial extent in simple fitting = 5.68"
[Tue Jun 12 20:45:00 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.226
[Tue Jun 12 20:45:00 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.68"
[Tue Jun 12 20:59:59 2012] fullrun_pn_xmm0109470201_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 12 20:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109470201_pi300-10000_cl_pass1_src3.csv
[Tue Jun 12 20:59:59 2012] fullrun_pn_xmm0109470201_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 12 20:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109470201_pi300-10000_cl_pass1_src3.csv
[Tue Jun 12 20:59:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109470201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109470201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:59:59 2012] fullrun_pn_xmm0109470201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 12 20:59:59 2012] fullrun_pn_xmm0109470201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 12 20:59:59 2012] Fit fullrun_pn_xmm0109470201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jun 12 21:20:04 2012] Warning, spatial fit 3 centroid is now closest to src. 11
[Tue Jun 12 21:20:04 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 21:20:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 21:20:04 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 21:20:04 2012] Source does appear to be extended
[Tue Jun 12 21:20:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 21:20:12 2012] Counts = 1053.140000, rescaling region sizes by 2.000000
[Tue Jun 12 21:20:12 2012] XMMSAS src. selection expression = ellipse(25511.294600, 27904.650400, 681.831620, 681.831620, 0.000000, X, Y)
[Tue Jun 12 21:20:12 2012] Writing source region out to fullrun_pn_xmm0109470201_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 12 21:20:12 2012] Extracting stamp from image fullrun_pn_xmm0109470201_pi300-10000_cl_sm2.00.img.gz, (255, 282) - (333, 360)
[Tue Jun 12 21:20:12 2012] XMMSAS bgd. selection expression = annulus(25511.294600, 27904.650400, 2272.772065, 4545.544131, X, Y) && !ellipse(28866.609600, 25438.906400, 416.843212, 416.843212, 0.000000, X, Y) && !ellipse(29468.679352, 31829.165009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20381.813705, 24807.947998, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 12 21:20:12 2012] Writing fullrun_pn_xmm0109470201_pi300-10000_pass1_cl_src3.gif
[Tue Jun 12 21:20:49 2012] Mean detx,y = (132.22, -166.49) 
[Tue Jun 12 21:20:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 21:21:38 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 21:21:38 2012] Setting source spectrum file to fullrun_pn_xmm0109470201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 12 21:21:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109470201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 12 21:53:25 2012] Updating aperture counts using extracted products
[Tue Jun 12 21:53:25 2012] Error reading totcts from fullrun_pn_xmm0109470201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 12 21:53:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 21:53:26 2012] Using photon index=1.80, rate=0.105, arf fullrun_pn_xmm0109470201_pi300-10000_pass1_cl_src3.arf
[Tue Jun 12 21:53:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 21:53:26 2012] Updating source flux to 3.4e-13