[Tue Jun 12 20:07:23 2012] Detection parameters:
  Position = (196.4, 384.5) = 10 42 13.40 -59 36 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.2 +/- 7.9
  Background counts = 7.1
  Rate = 0.005 +/- 0.001

[Tue Jun 12 20:07:23 2012] Off-axis axis estimate = 9.68'
[Tue Jun 12 20:32:36 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 20:32:36 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Tue Jun 12 20:32:36 2012] source mask rpix=2.6, npix_max = 38, mask sum = 43, frac = 1.126
[Tue Jun 12 20:32:36 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.27"
[Tue Jun 12 20:44:46 2012] fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_src7.ximg exists
[Tue Jun 12 20:44:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_src7.csv
[Tue Jun 12 20:44:46 2012] fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Jun 12 20:44:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_src7.csv
[Tue Jun 12 20:44:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:44:46 2012] fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Jun 12 20:44:46 2012] fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Jun 12 20:44:46 2012] Fit fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Jun 12 20:44:54 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.009217 pixels away
[Tue Jun 12 20:44:54 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 20:44:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 20:44:54 2012] Assessing source extent using major
[Tue Jun 12 20:44:54 2012] Source does appear to be extended
[Tue Jun 12 20:44:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 21:08:44 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 21:08:44 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Tue Jun 12 21:08:44 2012] source mask rpix=2.6, npix_max = 38, mask sum = 43, frac = 1.126
[Tue Jun 12 21:08:44 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 11.27"
[Tue Jun 12 21:20:02 2012] fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jun 12 21:20:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_src7.csv
[Tue Jun 12 21:20:02 2012] fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jun 12 21:20:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_src7.csv
[Tue Jun 12 21:20:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 21:20:02 2012] fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jun 12 21:20:02 2012] fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jun 12 21:20:02 2012] Fit fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Jun 12 21:20:07 2012] Spatial fit model total counts = 94.497700, observed total counts = 92.000000
[Tue Jun 12 21:20:07 2012] Offset between fit and detection position for source 10 = 0.323808 pixels
[Tue Jun 12 21:20:07 2012] 92.861300 total counts/ 64.346500 bgd. counts: snr = 3.554740
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.323808 pixels
  Position = (196.7, 384.4) = 10 42 13.24 -59 36 2.9
  Extent = 7.1 (4.2-10.9)", rotation angle = 0
  Source counts = 28.5 +/- 9.6
  Background counts = 64.3
  Rate = 0.002 +/- 0.0008
[Tue Jun 12 21:20:07 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 21:20:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 21:20:07 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 21:20:07 2012] Source does appear to be extended
[Tue Jun 12 21:20:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 21:46:41 2012] XMMSAS src. selection expression = ellipse(17066.916800, 33392.526400, 428.190612, 428.190612, 0.000000, X, Y)
[Tue Jun 12 21:46:41 2012] Writing source region out to fullrun_mos2_xmm0109470201_pi300-10000_pass1_cl_src10_src.reg
[Tue Jun 12 21:46:41 2012] Extracting stamp from image fullrun_mos2_xmm0109470201_pi300-10000_cl_sm2.00.img.gz, (172, 360) - (221, 409)
[Tue Jun 12 21:46:41 2012] XMMSAS bgd. selection expression = annulus(17066.916800, 33392.526400, 713.651021, 1427.302041, X, Y)
[Tue Jun 12 21:46:41 2012] Writing fullrun_mos2_xmm0109470201_pi300-10000_pass1_cl_src10.gif
[Tue Jun 12 21:47:43 2012] Mean detx,y = (1771.77, 9949.06) 
[Tue Jun 12 21:47:44 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 21:47:50 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 21:47:50 2012] Setting source spectrum file to fullrun_mos2_xmm0109470201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jun 12 21:47:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109470201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Jun 12 21:52:39 2012] Not generating rmf since there are only 28 counts
[Tue Jun 12 21:52:39 2012] rmf not generated due to insufficient counts
[Tue Jun 12 21:53:26 2012] Updating aperture counts using extracted products
[Tue Jun 12 21:53:26 2012] Error reading totcts from fullrun_mos2_xmm0109470201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jun 12 21:53:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 21:53:26 2012] Using photon index=1.80, rate=0.00228, arf fullrun_mos2_xmm0109470201_pi300-10000_pass1_cl_src10.arf
[Tue Jun 12 21:53:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 21:53:26 2012] Updating source flux to 6.3e-14
[Tue Jun 12 21:53:34 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting