[Tue Jun 12 20:07:22 2012] Detection parameters:
  Position = (293.9, 321.1) = 10 41 17.55 -59 40 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 636.5 +/- 30.2
  Background counts = 10.2
  Rate = 0.05 +/- 0.002

[Tue Jun 12 20:07:23 2012] Off-axis axis estimate = 1.68'
[Tue Jun 12 20:32:36 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 20:32:36 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Tue Jun 12 20:32:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Tue Jun 12 20:32:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Tue Jun 12 20:44:46 2012] fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 12 20:44:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 20:44:46 2012] fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 12 20:44:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 20:44:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:44:46 2012] fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 12 20:44:46 2012] fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 12 20:44:46 2012] Fit fullrun_mos2_xmm0109470201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 12 20:44:54 2012] Spatial fit model total counts = 675.308000, observed total counts = 653.000000
[Tue Jun 12 20:44:54 2012] Offset between fit and detection position for source 1 = 0.176300 pixels
[Tue Jun 12 20:44:54 2012] 678.790000 total counts/ 252.582000 bgd. counts: snr = 26.817630
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.176300 pixels
  Position = (293.8, 321.2) = 10 41 17.64 -59 40 38.5
  Extent = 4.9 (4.5-5.3)", rotation angle = 0
  Source counts = 426.2 +/- 26.1
  Background counts = 252.6
  Rate = 0.03 +/- 0.002
[Tue Jun 12 20:44:54 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 20:44:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 20:44:54 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 20:44:54 2012] Source does appear to be extended
[Tue Jun 12 20:44:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 21:08:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 21:08:44 2012] Initial guess for spatial extent in simple fitting = 4.91"
[Tue Jun 12 21:08:44 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.849
[Tue Jun 12 21:08:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.91"
[Tue Jun 12 21:20:02 2012] fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 12 21:20:02 2012] fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 12 21:20:02 2012] Fit fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Jun 12 21:20:02 2012] fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 12 21:20:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 12 21:20:02 2012] fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 12 21:20:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 12 21:20:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109470201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 21:20:07 2012] Spatial fit model total counts = 691.213000, observed total counts = 653.000000
[Tue Jun 12 21:20:07 2012] Offset between fit and detection position for source 1 = 0.032662 pixels
[Tue Jun 12 21:20:07 2012] 695.518000 total counts/ 272.324000 bgd. counts: snr = 25.644636
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.032662 pixels
  Position = (293.7, 321.2) = 10 41 17.65 -59 40 38.6
  Extent = 5.1" x 4.6", rotation angle = 329
  Source counts = 423.2 +/- 26.4
  Background counts = 272.3
  Rate = 0.03 +/- 0.002
[Tue Jun 12 21:20:07 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 21:20:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 21:20:07 2012] Assessing source extent using major
[Tue Jun 12 21:20:07 2012] Source does appear to be extended
[Tue Jun 12 21:20:07 2012] Computing asymmetry using major and minor axis, asym = 1.11
[Tue Jun 12 21:46:41 2012] XMMSAS src. selection expression = ellipse(25506.536226, 27895.909941, 308.460009, 277.220501, 328.867834, X, Y)
[Tue Jun 12 21:46:41 2012] Writing source region out to fullrun_mos2_xmm0109470201_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 12 21:46:41 2012] Extracting stamp from image fullrun_mos2_xmm0109470201_pi300-10000_cl_sm2.00.img.gz, (276, 303) - (311, 339)
[Tue Jun 12 21:46:41 2012] XMMSAS bgd. selection expression = annulus(25506.536226, 27895.909941, 514.100015, 1028.200031, X, Y)
[Tue Jun 12 21:46:41 2012] Writing fullrun_mos2_xmm0109470201_pi300-10000_pass1_cl_src1.gif
[Tue Jun 12 21:46:43 2012] Mean detx,y = (18.24, 18.92) 
[Tue Jun 12 21:46:44 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 21:46:49 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 21:46:49 2012] Setting source spectrum file to fullrun_mos2_xmm0109470201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 21:46:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109470201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 12 21:53:26 2012] Updating aperture counts using extracted products
[Tue Jun 12 21:53:26 2012] Error reading totcts from fullrun_mos2_xmm0109470201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 21:53:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 21:53:26 2012] Using photon index=1.80, rate=0.0338, arf fullrun_mos2_xmm0109470201_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 21:53:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 21:53:26 2012] Updating source flux to 5.5e-13
[Tue Jun 12 21:53:40 2012] Reading fit data from xmm0109470201/analysis//spectral/fullrun_mos2_xmm0109470201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 12 21:53:40 2012] Spectral fit parameter nH value = 3.12722e+21
[Tue Jun 12 21:53:40 2012] Spectral fit parameter PhoIndex value = 3.36627
[Tue Jun 12 21:53:40 2012] Failed to get F(0.3-8.0) from xmm0109470201/analysis//spectral/fullrun_mos2_xmm0109470201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 12 21:53:40 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 21:53:40 2012] Using Nh = 3.1e+21, photon index=3.37, rate=0.0338, arf fullrun_mos2_xmm0109470201_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 21:53:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 21:53:40 2012] Updating source flux to 3.9e-13