[Tue Jun 12 20:07:03 2012] Detection parameters:
  Position = (326.8, 503.7) = 10 40 58.78 -59 27 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.1 +/- 6.9
  Background counts = 4.0
  Rate = 0.002 +/- 0.0006

[Tue Jun 12 20:07:03 2012] Off-axis axis estimate = 15.02'
[Tue Jun 12 20:24:26 2012] Using EEF radius (= 13.94 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 20:24:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 12 20:24:26 2012] Initial guess for spatial extent in simple fitting = 13.94"
[Tue Jun 12 20:24:26 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.893
[Tue Jun 12 20:24:26 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.94"
[Tue Jun 12 20:32:36 2012] fullrun_mos1_xmm0109470201_pi300-10000_cl_pass0_src10.ximg exists
[Tue Jun 12 20:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109470201_pi300-10000_cl_pass0_src10.csv
[Tue Jun 12 20:32:36 2012] fullrun_mos1_xmm0109470201_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Jun 12 20:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109470201_pi300-10000_cl_pass0_src10.csv
[Tue Jun 12 20:32:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109470201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109470201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:32:36 2012] fullrun_mos1_xmm0109470201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Jun 12 20:32:36 2012] fullrun_mos1_xmm0109470201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Jun 12 20:32:36 2012] Fit fullrun_mos1_xmm0109470201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Jun 12 20:44:51 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 18.875791 pixels away
[Tue Jun 12 20:44:51 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 20:44:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 20:44:51 2012] Assessing source extent using major
[Tue Jun 12 20:44:51 2012] Source does appear to be extended
[Tue Jun 12 20:44:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 21:00:00 2012] Using EEF radius (= 13.94 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 21:00:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 12 21:00:00 2012] Initial guess for spatial extent in simple fitting = 13.94"
[Tue Jun 12 21:00:00 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.893
[Tue Jun 12 21:00:00 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.94"
[Tue Jun 12 21:08:44 2012] fullrun_mos1_xmm0109470201_pi300-10000_cl_pass1_src10.ximg exists
[Tue Jun 12 21:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109470201_pi300-10000_cl_pass1_src10.csv
[Tue Jun 12 21:08:44 2012] fullrun_mos1_xmm0109470201_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Jun 12 21:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109470201_pi300-10000_cl_pass1_src10.csv
[Tue Jun 12 21:08:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109470201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109470201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 21:08:44 2012] fullrun_mos1_xmm0109470201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Jun 12 21:08:44 2012] fullrun_mos1_xmm0109470201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jun 12 21:08:44 2012] Fit fullrun_mos1_xmm0109470201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Jun 12 21:20:05 2012] Spatial fit model total counts = 74.108100, observed total counts = 74.000000
[Tue Jun 12 21:20:05 2012] Offset between fit and detection position for source 10 = 0.247355 pixels
[Tue Jun 12 21:20:05 2012] 73.897100 total counts/ 60.606300 bgd. counts: snr = 1.707231
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.247355 pixels
  Position = (326.6, 503.5) = 10 40 58.87 -59 27 25.4
  Extent = 3.6 (3.5-7.3)", rotation angle = 0
  Source counts = 13.3 +/- 8.6
  Background counts = 60.6
  Rate = 0.001 +/- 0.0007
  Deleting source due to low Poisson probability