[Fri Sep  7 02:39:25 2012] Detection parameters:
  Position = (399.1, 416.0) = 10 40 19.47 -59 33 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.6 +/- 16.8
  Background counts = 8.4
  Rate = 0.07 +/- 0.007

[Fri Sep  7 02:39:25 2012] Off-axis axis estimate = 11.22'
[Fri Sep  7 02:43:01 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 02:43:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 02:43:01 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Fri Sep  7 02:43:01 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.843
[Fri Sep  7 02:43:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.04"
[Fri Sep  7 02:47:56 2012] fullrun_mos1_xmm0109470101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Sep  7 02:47:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109470101_pi300-10000_cl_pass0_src1.csv
[Fri Sep  7 02:47:56 2012] fullrun_mos1_xmm0109470101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Sep  7 02:47:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109470101_pi300-10000_cl_pass0_src1.csv
[Fri Sep  7 02:47:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109470101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109470101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 02:47:56 2012] fullrun_mos1_xmm0109470101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep  7 02:47:56 2012] fullrun_mos1_xmm0109470101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep  7 02:47:56 2012] Fit fullrun_mos1_xmm0109470101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep  7 02:51:00 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Fri Sep  7 02:51:00 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 02:51:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 02:51:00 2012] Assessing source extent using major
[Fri Sep  7 02:51:00 2012] Source does appear to be extended
[Fri Sep  7 02:51:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 02:53:51 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 02:53:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 02:53:51 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Fri Sep  7 02:53:51 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.843
[Fri Sep  7 02:53:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.04"
[Fri Sep  7 02:58:36 2012] fullrun_mos1_xmm0109470101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep  7 02:58:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109470101_pi300-10000_cl_pass1_src1.csv
[Fri Sep  7 02:58:36 2012] fullrun_mos1_xmm0109470101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep  7 02:58:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109470101_pi300-10000_cl_pass1_src1.csv
[Fri Sep  7 02:58:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109470101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109470101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 02:58:36 2012] fullrun_mos1_xmm0109470101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep  7 02:58:36 2012] fullrun_mos1_xmm0109470101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep  7 02:58:36 2012] Fit fullrun_mos1_xmm0109470101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep  7 03:01:28 2012] Spatial fit model total counts = 239.583000, observed total counts = 239.000000
[Fri Sep  7 03:01:28 2012] Offset between fit and detection position for source 2 = 0.214707 pixels
[Fri Sep  7 03:01:28 2012] 237.305300 total counts/ 139.246000 bgd. counts: snr = 8.309931
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.214707 pixels
  Position = (398.9, 416.0) = 10 40 19.59 -59 33 46.7
  Extent = 4.7 (3.9-5.9)", rotation angle = 0
  Source counts = 98.1 +/- 15.4
  Background counts = 139.2
  Rate = 0.03 +/- 0.004
[Fri Sep  7 03:01:28 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 03:01:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 03:01:28 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 03:01:28 2012] Source does appear to be extended
[Fri Sep  7 03:01:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 03:02:09 2012] XMMSAS src. selection expression = ellipse(34653.730200, 36139.831800, 283.534208, 283.534208, 0.000000, X, Y)
[Fri Sep  7 03:02:09 2012] Writing source region out to fullrun_mos1_xmm0109470101_pi300-10000_pass1_cl_src2_src.reg
[Fri Sep  7 03:02:09 2012] Extracting stamp from image fullrun_mos1_xmm0109470101_pi300-10000_cl_sm2.00.img.gz, (383, 400) - (415, 432)
[Fri Sep  7 03:02:09 2012] XMMSAS bgd. selection expression = annulus(34653.730200, 36139.831800, 472.557014, 945.114027, X, Y)
[Fri Sep  7 03:02:09 2012] Writing fullrun_mos1_xmm0109470101_pi300-10000_pass1_cl_src2.gif
[Fri Sep  7 03:02:10 2012] Mean detx,y = (1026.38, 11863.61) 
[Fri Sep  7 03:02:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 03:02:17 2012] grppha failed
[Fri Sep  7 03:02:17 2012] Setting source spectrum file to fullrun_mos1_xmm0109470101_pi300-10000_pass1_cl_src2_src.pi.gz
[Fri Sep  7 03:02:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109470101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Sep  7 03:02:42 2012] Not generating rmf since there are only 98 counts
[Fri Sep  7 03:02:42 2012] rmf not generated due to insufficient counts
[Fri Sep  7 03:03:18 2012] Updating aperture counts using extracted products
[Fri Sep  7 03:03:18 2012] Error reading totcts from fullrun_mos1_xmm0109470101_pi300-10000_pass1_cl_src2_src.pi.gz
[Fri Sep  7 03:03:18 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 03:03:19 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep  7 03:03:20 2012] xmm0109470101/analysis//spectral/fullrun_mos1_xmm0109470101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete