[Tue May 22 08:33:38 2012] Detection parameters:
  Position = (348.3, 184.3) = 15 52 31.05 18 49 54.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.0 +/- 9.6
  Background counts = 9.4
  Rate = 0.009 +/- 0.002

[Tue May 22 08:33:38 2012] Off-axis axis estimate = 9.03'
[Tue May 22 08:53:23 2012] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting
[Tue May 22 08:53:23 2012] Initial guess for spatial extent in simple fitting = 10.94"
[Tue May 22 08:53:23 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.990
[Tue May 22 08:53:23 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.94"
[Tue May 22 09:03:12 2012] fullrun_mos1_xmm0109464901_pi300-10000_cl_pass0_src3.ximg exists
[Tue May 22 09:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109464901_pi300-10000_cl_pass0_src3.csv
[Tue May 22 09:03:12 2012] fullrun_mos1_xmm0109464901_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue May 22 09:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109464901_pi300-10000_cl_pass0_src3.csv
[Tue May 22 09:03:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109464901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109464901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 09:03:12 2012] fullrun_mos1_xmm0109464901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue May 22 09:03:12 2012] fullrun_mos1_xmm0109464901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue May 22 09:03:12 2012] Fit fullrun_mos1_xmm0109464901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue May 22 09:10:17 2012] Spatial fit model total counts = 53.999800, observed total counts = 54.000000
[Tue May 22 09:10:17 2012] Offset between fit and detection position for source 3 = 0.182100 pixels
[Tue May 22 09:10:17 2012] 53.615700 total counts/ 31.335600 bgd. counts: snr = 3.980138
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.182100 pixels
  Position = (348.1, 184.5) = 15 52 31.08 18 49 54.2
  Extent = 5.0 (3.3-8.2)", rotation angle = 0
  Source counts = 22.3 +/- 7.3
  Background counts = 31.3
  Rate = 0.003 +/- 0.0009
[Tue May 22 09:10:17 2012] Vigneting correction estimate = 1.000000
[Tue May 22 09:10:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 09:10:17 2012] Assessing source extent using major axis lower bound
[Tue May 22 09:10:17 2012] Source does appear to be extended
[Tue May 22 09:10:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 09:27:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 22 09:27:35 2012] Initial guess for spatial extent in simple fitting = 4.99"
[Tue May 22 09:27:35 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.104
[Tue May 22 09:27:35 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.99"
[Tue May 22 09:36:43 2012] fullrun_mos1_xmm0109464901_pi300-10000_cl_pass1_src3.ximg exists
[Tue May 22 09:36:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109464901_pi300-10000_cl_pass1_src3.csv
[Tue May 22 09:36:43 2012] fullrun_mos1_xmm0109464901_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue May 22 09:36:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109464901_pi300-10000_cl_pass1_src3.csv
[Tue May 22 09:36:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109464901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109464901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 09:36:43 2012] fullrun_mos1_xmm0109464901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue May 22 09:36:43 2012] fullrun_mos1_xmm0109464901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue May 22 09:36:43 2012] Fit fullrun_mos1_xmm0109464901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue May 22 09:43:03 2012] Spatial fit model total counts = 54.000100, observed total counts = 54.000000
[Tue May 22 09:43:03 2012] Offset between fit and detection position for source 3 = 0.000919 pixels
[Tue May 22 09:43:03 2012] 53.615900 total counts/ 31.348000 bgd. counts: snr = 3.977172
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000919 pixels
  Position = (348.1, 184.5) = 15 52 31.08 18 49 54.2
  Extent = 5.0 (3.3-8.2)", rotation angle = 0
  Source counts = 22.3 +/- 7.3
  Background counts = 31.3
  Rate = 0.003 +/- 0.0009
[Tue May 22 09:43:03 2012] Vigneting correction estimate = 1.000000
[Tue May 22 09:43:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 09:43:03 2012] Assessing source extent using major axis lower bound
[Tue May 22 09:43:03 2012] Source does appear to be extended
[Tue May 22 09:43:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 09:53:26 2012] XMMSAS src. selection expression = ellipse(30239.415740, 16000.108800, 299.336985, 299.336985, 0.000000, X, Y)
[Tue May 22 09:53:26 2012] Writing source region out to fullrun_mos1_xmm0109464901_pi300-10000_pass1_cl_src3_src.reg
[Tue May 22 09:53:26 2012] Extracting stamp from image fullrun_mos1_xmm0109464901_pi300-10000_cl_sm2.00.img.gz, (331, 167) - (365, 202)
[Tue May 22 09:53:26 2012] XMMSAS bgd. selection expression = annulus(30239.415740, 16000.108800, 498.894975, 997.789950, X, Y)
[Tue May 22 09:53:26 2012] Writing fullrun_mos1_xmm0109464901_pi300-10000_pass1_cl_src3.gif
[Tue May 22 09:53:50 2012] Mean detx,y = (9371.75, -546.61) 
[Tue May 22 09:53:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 09:53:57 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 09:53:57 2012] Setting source spectrum file to fullrun_mos1_xmm0109464901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 22 09:53:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109464901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue May 22 09:54:51 2012] Not generating rmf since there are only 22 counts
[Tue May 22 09:54:51 2012] rmf not generated due to insufficient counts
[Tue May 22 09:56:32 2012] Updating aperture counts using extracted products
[Tue May 22 09:56:32 2012] Error reading totcts from fullrun_mos1_xmm0109464901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 22 09:56:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 09:56:33 2012] Using photon index=1.80, rate=0.00282, arf fullrun_mos1_xmm0109464901_pi300-10000_pass1_cl_src3.arf
[Tue May 22 09:56:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 09:56:33 2012] Updating source flux to 5.8e-14
[Tue May 22 09:56:35 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 22 09:56:36 2012] xmm0109464901/analysis//spectral/fullrun_mos1_xmm0109464901_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete