[Tue May 29 04:04:17 2012] Detection parameters:
  Position = (181.9, 225.2) = 3 32 49.21 -26 2 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.5 +/- 19.3
  Background counts = 18.6
  Rate = 0.03 +/- 0.003

[Tue May 29 04:04:17 2012] Off-axis axis estimate = 9.98'
[Tue May 29 04:07:16 2012] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Tue May 29 04:07:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 29 04:07:16 2012] Initial guess for spatial extent in simple fitting = 11.42"
[Tue May 29 04:07:16 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.922
[Tue May 29 04:07:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.42"
[Tue May 29 04:10:25 2012] fullrun_mos1_xmm0109464801_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 29 04:10:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109464801_pi300-10000_cl_pass0_src1.csv
[Tue May 29 04:10:25 2012] fullrun_mos1_xmm0109464801_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 29 04:10:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109464801_pi300-10000_cl_pass0_src1.csv
[Tue May 29 04:10:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109464801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109464801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 04:10:25 2012] fullrun_mos1_xmm0109464801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 29 04:10:25 2012] fullrun_mos1_xmm0109464801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 29 04:10:25 2012] Fit fullrun_mos1_xmm0109464801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 29 04:12:47 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.757680 pixels away
[Tue May 29 04:12:47 2012] Vigneting correction estimate = 1.000000
[Tue May 29 04:12:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 04:12:47 2012] Assessing source extent using major
[Tue May 29 04:12:47 2012] Source does appear to be extended
[Tue May 29 04:12:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 04:14:29 2012] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Tue May 29 04:14:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 29 04:14:29 2012] Initial guess for spatial extent in simple fitting = 11.42"
[Tue May 29 04:14:29 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.922
[Tue May 29 04:14:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.42"
[Tue May 29 04:18:18 2012] fullrun_mos1_xmm0109464801_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 29 04:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109464801_pi300-10000_cl_pass1_src1.csv
[Tue May 29 04:18:18 2012] fullrun_mos1_xmm0109464801_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 29 04:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109464801_pi300-10000_cl_pass1_src1.csv
[Tue May 29 04:18:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109464801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109464801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 04:18:18 2012] fullrun_mos1_xmm0109464801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 29 04:18:18 2012] fullrun_mos1_xmm0109464801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 29 04:18:18 2012] Fit fullrun_mos1_xmm0109464801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 29 04:22:07 2012] Spatial fit model total counts = 202.820000, observed total counts = 194.000000
[Tue May 29 04:22:07 2012] Offset between fit and detection position for source 1 = 0.328618 pixels
[Tue May 29 04:22:07 2012] 205.241700 total counts/ 114.415000 bgd. counts: snr = 8.491258
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.328618 pixels
  Position = (182.2, 225.4) = 3 32 49.12 -26 2 51.7
  Extent = 6.7 (5.6-8.3)", rotation angle = 0
  Source counts = 90.8 +/- 14.3
  Background counts = 114.4
  Rate = 0.03 +/- 0.005
[Tue May 29 04:22:07 2012] Vigneting correction estimate = 1.000000
[Tue May 29 04:22:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 04:22:07 2012] Assessing source extent using major axis lower bound
[Tue May 29 04:22:07 2012] Source does appear to be extended
[Tue May 29 04:22:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 04:22:58 2012] XMMSAS src. selection expression = ellipse(15804.437400, 19558.534120, 399.126611, 399.126611, 0.000000, X, Y)
[Tue May 29 04:22:58 2012] Writing source region out to fullrun_mos1_xmm0109464801_pi300-10000_pass1_cl_src1_src.reg
[Tue May 29 04:22:58 2012] Extracting stamp from image fullrun_mos1_xmm0109464801_pi300-10000_cl_sm2.00.img.gz, (159, 202) - (205, 248)
[Tue May 29 04:22:58 2012] XMMSAS bgd. selection expression = annulus(15804.437400, 19558.534120, 665.211019, 1330.422038, X, Y)
[Tue May 29 04:22:58 2012] Writing fullrun_mos1_xmm0109464801_pi300-10000_pass1_cl_src1.gif
[Tue May 29 04:22:59 2012] Mean detx,y = (-12344.58, -6190.82) 
[Tue May 29 04:23:00 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 04:23:09 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 04:23:09 2012] Setting source spectrum file to fullrun_mos1_xmm0109464801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 29 04:23:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109464801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 29 04:23:34 2012] Not generating rmf since there are only 90 counts
[Tue May 29 04:23:34 2012] rmf not generated due to insufficient counts
[Tue May 29 04:24:38 2012] Updating aperture counts using extracted products
[Tue May 29 04:24:38 2012] Error reading totcts from fullrun_mos1_xmm0109464801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 29 04:24:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 04:24:38 2012] Using photon index=1.80, rate=0.0295, arf fullrun_mos1_xmm0109464801_pi300-10000_pass1_cl_src1.arf
[Tue May 29 04:24:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 04:24:38 2012] Updating source flux to 7.9e-13
[Tue May 29 04:24:39 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 29 04:24:40 2012] xmm0109464801/analysis//spectral/fullrun_mos1_xmm0109464801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete