[Fri Jun 29 02:48:05 2012] Detection parameters:
  Position = (235.7, 276.0) = 9 29 29.40 -24 8 23.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.4 +/- 7.3
  Background counts = 3.3
  Rate = 0.009 +/- 0.002

[Fri Jun 29 02:48:05 2012] Off-axis axis estimate = 4.83'
[Fri Jun 29 03:16:20 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 03:16:20 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Fri Jun 29 03:16:20 2012] source mask rpix=2.0, npix_max = 25, mask sum = 27, frac = 1.052
[Fri Jun 29 03:16:20 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.84"
[Fri Jun 29 03:29:18 2012] fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jun 29 03:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_src5.csv
[Fri Jun 29 03:29:18 2012] fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jun 29 03:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_src5.csv
[Fri Jun 29 03:29:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 03:29:18 2012] fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun 29 03:29:18 2012] fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun 29 03:29:18 2012] Fit fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Jun 29 03:29:24 2012] Spatial fit model total counts = 47.340700, observed total counts = 48.000000
[Fri Jun 29 03:29:24 2012] Offset between fit and detection position for source 6 = 0.251678 pixels
[Fri Jun 29 03:29:24 2012] 45.751270 total counts/ 7.647070 bgd. counts: snr = 13.779242
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.251678 pixels
  Position = (235.5, 276.0) = 9 29 29.48 -24 8 24.6
  Extent = 7.1 (3.4-10.2)", rotation angle = 0
  Source counts = 38.1 +/- 6.8
  Background counts = 7.6
  Rate = 0.005 +/- 0.001
[Fri Jun 29 03:29:24 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 03:29:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 03:29:24 2012] Assessing source extent using major axis lower bound
[Fri Jun 29 03:29:24 2012] Source does appear to be extended
[Fri Jun 29 03:29:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 04:00:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 29 04:00:22 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Fri Jun 29 04:00:22 2012] source mask rpix=1.6, npix_max = 18, mask sum = 18, frac = 0.984
[Fri Jun 29 04:00:22 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.13"
[Fri Jun 29 04:11:42 2012] fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun 29 04:11:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_src5.csv
[Fri Jun 29 04:11:42 2012] fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun 29 04:11:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_src5.csv
[Fri Jun 29 04:11:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 04:11:42 2012] fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun 29 04:11:42 2012] fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun 29 04:11:42 2012] Fit fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jun 29 04:11:50 2012] Spatial fit model total counts = 47.286100, observed total counts = 48.000000
[Fri Jun 29 04:11:50 2012] Offset between fit and detection position for source 6 = 0.015446 pixels
[Fri Jun 29 04:11:50 2012] 45.685890 total counts/ 7.847390 bgd. counts: snr = 13.507385
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.015446 pixels
  Position = (235.5, 276.0) = 9 29 29.48 -24 8 24.6
  Extent = 7.0 (3.5-10.2)", rotation angle = 0
  Source counts = 37.8 +/- 6.8
  Background counts = 7.8
  Rate = 0.005 +/- 0.001
[Fri Jun 29 04:11:50 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 04:11:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 04:11:50 2012] Assessing source extent using major axis lower bound
[Fri Jun 29 04:11:50 2012] Source does appear to be extended
[Fri Jun 29 04:11:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 04:34:54 2012] XMMSAS src. selection expression = ellipse(20440.848200, 23962.071600, 422.030412, 422.030412, 0.000000, X, Y)
[Fri Jun 29 04:34:54 2012] Writing source region out to fullrun_mos2_xmm0109464201_pi300-10000_pass1_cl_src6_src.reg
[Fri Jun 29 04:34:54 2012] Extracting stamp from image fullrun_mos2_xmm0109464201_pi300-10000_cl_sm2.00.img.gz, (211, 252) - (260, 300)
[Fri Jun 29 04:34:54 2012] XMMSAS bgd. selection expression = annulus(20440.848200, 23962.071600, 703.384020, 1406.768040, X, Y)
[Fri Jun 29 04:34:54 2012] Writing fullrun_mos2_xmm0109464201_pi300-10000_pass1_cl_src6.gif
[Fri Jun 29 04:35:58 2012] Mean detx,y = (7019.58, -2149.33) 
[Fri Jun 29 04:35:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 29 04:36:06 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 29 04:36:06 2012] Setting source spectrum file to fullrun_mos2_xmm0109464201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun 29 04:36:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109464201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jun 29 04:47:50 2012] Not generating rmf since there are only 37 counts
[Fri Jun 29 04:47:50 2012] rmf not generated due to insufficient counts
[Fri Jun 29 04:48:18 2012] Updating aperture counts using extracted products
[Fri Jun 29 04:48:18 2012] Error reading totcts from fullrun_mos2_xmm0109464201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun 29 04:48:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 29 04:48:18 2012] Using photon index=1.80, rate=0.00539, arf fullrun_mos2_xmm0109464201_pi300-10000_pass1_cl_src6.arf
[Fri Jun 29 04:48:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 29 04:48:18 2012] Updating source flux to 9.5e-14
[Fri Jun 29 04:48:20 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting