[Fri Jun 29 02:48:05 2012] Detection parameters:
  Position = (286.5, 396.6) = 9 29 13.27 -23 59 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.4 +/- 17.6
  Background counts = 3.9
  Rate = 0.05 +/- 0.005

[Fri Jun 29 02:48:05 2012] Off-axis axis estimate = 7.17'
[Fri Jun 29 03:16:20 2012] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 03:16:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 29 03:16:20 2012] Initial guess for spatial extent in simple fitting = 10.01"
[Fri Jun 29 03:16:20 2012] source mask rpix=2.3, npix_max = 31, mask sum = 19, frac = 0.605
[Fri Jun 29 03:16:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.01"
[Fri Jun 29 03:29:18 2012] fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 29 03:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 29 03:29:18 2012] fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 29 03:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 29 03:29:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 03:29:18 2012] fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 29 03:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 29 03:29:18 2012] fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 29 03:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 29 03:29:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109464201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 03:29:24 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.387718 pixels away
[Fri Jun 29 03:29:24 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 03:29:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 03:29:24 2012] Assessing source extent using major
[Fri Jun 29 03:29:24 2012] Source does appear to be extended
[Fri Jun 29 03:29:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 04:00:22 2012] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 04:00:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 29 04:00:22 2012] Initial guess for spatial extent in simple fitting = 10.01"
[Fri Jun 29 04:00:22 2012] source mask rpix=2.3, npix_max = 31, mask sum = 19, frac = 0.605
[Fri Jun 29 04:00:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.01"
[Fri Jun 29 04:11:42 2012] fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 29 04:11:42 2012] fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 29 04:11:42 2012] Fit fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Jun 29 04:11:42 2012] fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 29 04:11:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 29 04:11:42 2012] fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 29 04:11:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 29 04:11:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109464201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 04:11:50 2012] Spatial fit model total counts = 218.998000, observed total counts = 242.000000
[Fri Jun 29 04:11:50 2012] Offset between fit and detection position for source 1 = 0.413282 pixels
[Fri Jun 29 04:11:50 2012] 213.622700 total counts/ 34.031700 bgd. counts: snr = 30.785254
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.413282 pixels
  Position = (286.2, 396.9) = 9 29 13.37 -23 59 38.8
  Extent = 12.0" x 4.8", rotation angle = 344
  Source counts = 179.6 +/- 14.6
  Background counts = 34.0
  Rate = 0.03 +/- 0.002
[Fri Jun 29 04:11:50 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 04:11:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 04:11:50 2012] Assessing source extent using major
[Fri Jun 29 04:11:50 2012] Source does appear to be extended
[Fri Jun 29 04:11:50 2012] Computing asymmetry using major and minor axis, asym = 2.50
[Fri Jun 29 04:11:50 2012] Source is asymmetric
[Fri Jun 29 04:34:54 2012] XMMSAS src. selection expression = ellipse(24848.446461, 34479.888023, 722.068976, 288.912979, 344.029520, X, Y)
[Fri Jun 29 04:34:54 2012] Writing source region out to fullrun_mos2_xmm0109464201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 29 04:34:54 2012] Extracting stamp from image fullrun_mos2_xmm0109464201_pi300-10000_cl_sm2.00.img.gz, (245, 355) - (328, 438)
[Fri Jun 29 04:34:54 2012] XMMSAS bgd. selection expression = annulus(24848.446461, 34479.888023, 1203.448294, 2406.896588, X, Y)
[Fri Jun 29 04:34:54 2012] Writing fullrun_mos2_xmm0109464201_pi300-10000_pass1_cl_src1.gif
[Fri Jun 29 04:34:56 2012] Mean detx,y = (79.61, 6933.21) 
[Fri Jun 29 04:34:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 29 04:35:11 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 29 04:35:12 2012] Setting source spectrum file to fullrun_mos2_xmm0109464201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 29 04:35:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109464201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 29 04:48:18 2012] Updating aperture counts using extracted products
[Fri Jun 29 04:48:18 2012] Error reading totcts from fullrun_mos2_xmm0109464201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 29 04:48:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 29 04:48:18 2012] Using photon index=1.80, rate=0.0256, arf fullrun_mos2_xmm0109464201_pi300-10000_pass1_cl_src1.arf
[Fri Jun 29 04:48:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 29 04:48:18 2012] Updating source flux to 2.3e-12
[Fri Jun 29 04:48:26 2012] Reading fit data from xmm0109464201/analysis//spectral/fullrun_mos2_xmm0109464201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 29 04:48:26 2012] Spectral fit parameter nH value = 5.18135e+20
[Fri Jun 29 04:48:26 2012] Spectral fit parameter PhoIndex value = 1.67058
[Fri Jun 29 04:48:26 2012] Failed to get F(0.3-8.0) from xmm0109464201/analysis//spectral/fullrun_mos2_xmm0109464201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 29 04:48:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 29 04:48:26 2012] Using Nh = 5.2e+20, photon index=1.67, rate=0.0256, arf fullrun_mos2_xmm0109464201_pi300-10000_pass1_cl_src1.arf
[Fri Jun 29 04:48:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 29 04:48:26 2012] Updating source flux to 2.6e-12