[Fri Jun 29 02:47:47 2012] Detection parameters:
  Position = (446.3, 410.9) = 9 28 22.55 -23 58 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.8 +/- 9.0
  Background counts = 3.0
  Rate = 0.007 +/- 0.001

[Fri Jun 29 02:47:47 2012] Off-axis axis estimate = 13.47'
[Fri Jun 29 03:02:33 2012] Using EEF radius (= 13.16 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 03:02:33 2012] Initial guess for spatial extent in simple fitting = 13.16"
[Fri Jun 29 03:02:33 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.985
[Fri Jun 29 03:02:33 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.16"
[Fri Jun 29 03:16:20 2012] fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jun 29 03:16:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_src5.csv
[Fri Jun 29 03:16:20 2012] fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jun 29 03:16:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_src5.csv
[Fri Jun 29 03:16:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 03:16:20 2012] fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun 29 03:16:20 2012] fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun 29 03:16:20 2012] Fit fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Jun 29 03:29:22 2012] Spatial fit model total counts = 76.076500, observed total counts = 77.000000
[Fri Jun 29 03:29:22 2012] Offset between fit and detection position for source 3 = 0.444711 pixels
[Fri Jun 29 03:29:22 2012] 75.200800 total counts/ 37.145500 bgd. counts: snr = 6.243988
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.444711 pixels
  Position = (445.9, 410.9) = 9 28 22.69 -23 58 37.5
  Extent = 7.2 (5.7-9.0)", rotation angle = 0
  Source counts = 38.1 +/- 8.7
  Background counts = 37.1
  Rate = 0.005 +/- 0.001
[Fri Jun 29 03:29:22 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 03:29:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 03:29:22 2012] Assessing source extent using major axis lower bound
[Fri Jun 29 03:29:22 2012] Source does appear to be extended
[Fri Jun 29 03:29:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 03:46:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 29 03:46:10 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Fri Jun 29 03:46:10 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.868
[Fri Jun 29 03:46:10 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.16"
[Fri Jun 29 04:00:22 2012] fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun 29 04:00:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_src5.csv
[Fri Jun 29 04:00:22 2012] fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun 29 04:00:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_src5.csv
[Fri Jun 29 04:00:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 04:00:22 2012] fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun 29 04:00:22 2012] fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun 29 04:00:22 2012] Fit fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jun 29 04:11:48 2012] Spatial fit model total counts = 64.995600, observed total counts = 65.000000
[Fri Jun 29 04:11:48 2012] Offset between fit and detection position for source 3 = 0.052786 pixels
[Fri Jun 29 04:11:48 2012] 64.448900 total counts/ 23.882700 bgd. counts: snr = 8.300851
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.052786 pixels
  Position = (445.9, 410.8) = 9 28 22.69 -23 58 37.7
  Extent = 7.1 (3.5-9.4)", rotation angle = 0
  Source counts = 40.6 +/- 8.0
  Background counts = 23.9
  Rate = 0.006 +/- 0.001
[Fri Jun 29 04:11:48 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 04:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 04:11:48 2012] Assessing source extent using major axis lower bound
[Fri Jun 29 04:11:48 2012] Source does appear to be extended
[Fri Jun 29 04:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 04:23:55 2012] XMMSAS src. selection expression = ellipse(38741.852600, 35692.990720, 428.948412, 428.948412, 0.000000, X, Y)
[Fri Jun 29 04:23:55 2012] Writing source region out to fullrun_mos1_xmm0109464201_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 29 04:23:55 2012] Extracting stamp from image fullrun_mos1_xmm0109464201_pi300-10000_cl_sm2.00.img.gz, (421, 386) - (471, 435)
[Fri Jun 29 04:23:55 2012] XMMSAS bgd. selection expression = annulus(38741.852600, 35692.990720, 714.914021, 1429.828041, X, Y) && !ellipse(39887.959160, 34538.917800, 371.156811, 371.156811, 0.000000, X, Y)
[Fri Jun 29 04:23:55 2012] Writing fullrun_mos1_xmm0109464201_pi300-10000_pass1_cl_src3.gif
[Fri Jun 29 04:25:05 2012] Mean detx,y = (4772.54, 13517.29) 
[Fri Jun 29 04:25:05 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 29 04:25:14 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 29 04:25:14 2012] Setting source spectrum file to fullrun_mos1_xmm0109464201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 29 04:25:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109464201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun 29 04:34:22 2012] Not generating rmf since there are only 40 counts
[Fri Jun 29 04:34:22 2012] rmf not generated due to insufficient counts
[Fri Jun 29 04:48:18 2012] Updating aperture counts using extracted products
[Fri Jun 29 04:48:18 2012] Error reading totcts from fullrun_mos1_xmm0109464201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 29 04:48:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 29 04:48:18 2012] Using photon index=1.80, rate=0.00578, arf fullrun_mos1_xmm0109464201_pi300-10000_pass1_cl_src3.arf
[Fri Jun 29 04:48:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 29 04:48:18 2012] Updating source flux to 1.2e-13
[Fri Jun 29 04:48:19 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 29 04:48:20 2012] xmm0109464201/analysis//spectral/fullrun_mos1_xmm0109464201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete