[Fri Jun 29 02:47:47 2012] Detection parameters:
  Position = (239.3, 163.1) = 9 29 28.30 -24 16 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.9 +/- 8.6
  Background counts = 3.3
  Rate = 0.006 +/- 0.001

[Fri Jun 29 02:47:47 2012] Off-axis axis estimate = 10.71'
[Fri Jun 29 03:02:33 2012] Using EEF radius (= 11.78 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 03:02:33 2012] Initial guess for spatial extent in simple fitting = 11.78"
[Fri Jun 29 03:02:33 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.874
[Fri Jun 29 03:02:33 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.78"
[Fri Jun 29 03:16:20 2012] fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun 29 03:16:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_src6.csv
[Fri Jun 29 03:16:20 2012] fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun 29 03:16:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_src6.csv
[Fri Jun 29 03:16:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 03:16:20 2012] fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun 29 03:16:20 2012] fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun 29 03:16:20 2012] Fit fullrun_mos1_xmm0109464201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jun 29 03:29:22 2012] Spatial fit model total counts = 75.212200, observed total counts = 75.000000
[Fri Jun 29 03:29:22 2012] Offset between fit and detection position for source 10 = 0.279635 pixels
[Fri Jun 29 03:29:22 2012] 75.728400 total counts/ 42.985400 bgd. counts: snr = 4.994109
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.279635 pixels
  Position = (239.3, 163.4) = 9 29 28.31 -24 16 34.3
  Extent = 7.5 (2.9-10.8)", rotation angle = 0
  Source counts = 32.7 +/- 8.7
  Background counts = 43.0
  Rate = 0.005 +/- 0.001
[Fri Jun 29 03:29:22 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 03:29:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 03:29:22 2012] Assessing source extent using major axis lower bound
[Fri Jun 29 03:29:22 2012] Source does appear to be extended
[Fri Jun 29 03:29:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 03:46:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 29 03:46:10 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Fri Jun 29 03:46:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.015
[Fri Jun 29 03:46:10 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.48"
[Fri Jun 29 04:00:22 2012] fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun 29 04:00:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_src6.csv
[Fri Jun 29 04:00:22 2012] fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun 29 04:00:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_src6.csv
[Fri Jun 29 04:00:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 04:00:22 2012] fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun 29 04:00:22 2012] fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun 29 04:00:22 2012] Fit fullrun_mos1_xmm0109464201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Jun 29 04:11:48 2012] Spatial fit model total counts = 75.221400, observed total counts = 75.000000
[Fri Jun 29 04:11:48 2012] Offset between fit and detection position for source 10 = 0.260982 pixels
[Fri Jun 29 04:11:48 2012] 75.826200 total counts/ 48.193100 bgd. counts: snr = 3.980496
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.260982 pixels
  Position = (239.5, 163.3) = 9 29 28.23 -24 16 34.9
  Extent = 5.9 (2.9-10.7)", rotation angle = 0
  Source counts = 27.6 +/- 8.7
  Background counts = 48.2
  Rate = 0.004 +/- 0.001
[Fri Jun 29 04:11:48 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 04:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 04:11:48 2012] Assessing source extent using major axis lower bound
[Fri Jun 29 04:11:48 2012] Source does appear to be extended
[Fri Jun 29 04:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 04:23:55 2012] XMMSAS src. selection expression = ellipse(20786.543200, 14156.925200, 356.450830, 356.450830, 0.000000, X, Y)
[Fri Jun 29 04:23:55 2012] Writing source region out to fullrun_mos1_xmm0109464201_pi300-10000_pass1_cl_src10_src.reg
[Fri Jun 29 04:23:55 2012] Extracting stamp from image fullrun_mos1_xmm0109464201_pi300-10000_cl_sm2.00.img.gz, (219, 143) - (260, 184)
[Fri Jun 29 04:23:55 2012] XMMSAS bgd. selection expression = annulus(20786.543200, 14156.925200, 594.084717, 1188.169435, X, Y)
[Fri Jun 29 04:23:55 2012] Writing fullrun_mos1_xmm0109464201_pi300-10000_pass1_cl_src10.gif
[Fri Jun 29 04:25:16 2012] Mean detx,y = (-11489.81, -9323.54) 
[Fri Jun 29 04:25:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 29 04:25:25 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 29 04:25:25 2012] Setting source spectrum file to fullrun_mos1_xmm0109464201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun 29 04:25:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109464201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jun 29 04:34:27 2012] Not generating rmf since there are only 27 counts
[Fri Jun 29 04:34:27 2012] rmf not generated due to insufficient counts
[Fri Jun 29 04:48:18 2012] Updating aperture counts using extracted products
[Fri Jun 29 04:48:18 2012] Error reading totcts from fullrun_mos1_xmm0109464201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun 29 04:48:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 29 04:48:18 2012] Using photon index=1.80, rate=0.00394, arf fullrun_mos1_xmm0109464201_pi300-10000_pass1_cl_src10.arf
[Fri Jun 29 04:48:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 29 04:48:18 2012] Updating source flux to 1.1e-13
[Fri Jun 29 04:48:19 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 29 04:48:20 2012] xmm0109464201/analysis//spectral/fullrun_mos1_xmm0109464201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete