[Thu Mar 15 10:09:15 2012] Detection parameters:
  Position = (305.1, 321.2) = 14 9 7.28 -45 17 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 551.0 +/- 28.2
  Background counts = 8.4
  Rate = 0.1 +/- 0.005

[Thu Mar 15 10:09:15 2012] Off-axis axis estimate = 1.72'
[Thu Mar 15 10:13:03 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 10:13:03 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Mar 15 10:13:03 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu Mar 15 10:13:03 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu Mar 15 10:16:58 2012] fullrun_mos2_xmm0109463801_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 15 10:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109463801_pi300-10000_cl_pass0_src1.csv
[Thu Mar 15 10:16:58 2012] fullrun_mos2_xmm0109463801_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 15 10:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109463801_pi300-10000_cl_pass0_src1.csv
[Thu Mar 15 10:16:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109463801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109463801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 10:16:58 2012] fullrun_mos2_xmm0109463801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 15 10:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109463801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Mar 15 10:16:58 2012] fullrun_mos2_xmm0109463801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 15 10:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109463801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Mar 15 10:16:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109463801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109463801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 10:17:02 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.000683 pixels away
[Thu Mar 15 10:17:02 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 10:17:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 10:17:02 2012] Assessing source extent using major
[Thu Mar 15 10:17:02 2012] Source does appear to be extended
[Thu Mar 15 10:17:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 10:19:42 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 10:19:42 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Mar 15 10:19:42 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu Mar 15 10:19:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Thu Mar 15 10:25:43 2012] fullrun_mos2_xmm0109463801_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 15 10:25:43 2012] fullrun_mos2_xmm0109463801_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 15 10:25:43 2012] Fit fullrun_mos2_xmm0109463801_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Mar 15 10:25:43 2012] fullrun_mos2_xmm0109463801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 15 10:25:43 2012] fullrun_mos2_xmm0109463801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 15 10:25:43 2012] Fit fullrun_mos2_xmm0109463801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 15 10:25:46 2012] Spatial fit model total counts = 560.396000, observed total counts = 531.000000
[Thu Mar 15 10:25:46 2012] Offset between fit and detection position for source 1 = 0.190516 pixels
[Thu Mar 15 10:25:46 2012] 566.156000 total counts/ 202.968000 bgd. counts: snr = 25.492810
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.190516 pixels
  Position = (304.9, 321.3) = 14 9 7.35 -45 17 15.8
  Extent = 4.6 (4.1-5.0)", rotation angle = 0
  Source counts = 363.2 +/- 23.8
  Background counts = 203.0
  Rate = 0.06 +/- 0.004
[Thu Mar 15 10:25:46 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 10:25:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 10:25:46 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 10:25:46 2012] Source does appear to be extended
[Thu Mar 15 10:25:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 10:26:36 2012] XMMSAS src. selection expression = ellipse(26480.478080, 27901.969200, 274.273808, 274.273808, 0.000000, X, Y)
[Thu Mar 15 10:26:36 2012] Writing source region out to fullrun_mos2_xmm0109463801_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar 15 10:26:36 2012] Extracting stamp from image fullrun_mos2_xmm0109463801_pi300-10000_cl_sm2.00.img.gz, (289, 306) - (321, 337)
[Thu Mar 15 10:26:36 2012] XMMSAS bgd. selection expression = annulus(26480.478080, 27901.969200, 457.123013, 914.246026, X, Y)
[Thu Mar 15 10:26:36 2012] Writing fullrun_mos2_xmm0109463801_pi300-10000_pass1_cl_src1.gif
[Thu Mar 15 10:26:39 2012] Mean detx,y = (24.52, 70.86) 
[Thu Mar 15 10:26:41 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 10:26:55 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 10:26:55 2012] Setting source spectrum file to fullrun_mos2_xmm0109463801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 15 10:26:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109463801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar 15 10:31:17 2012] Updating aperture counts using extracted products
[Thu Mar 15 10:31:17 2012] Error reading totcts from fullrun_mos2_xmm0109463801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 15 10:31:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 10:31:17 2012] Using photon index=1.80, rate=0.0629, arf fullrun_mos2_xmm0109463801_pi300-10000_pass1_cl_src1.arf
[Thu Mar 15 10:31:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 10:31:17 2012] Updating source flux to 8.6e-13
[Thu Mar 15 10:31:33 2012] Reading fit data from xmm0109463801/analysis//spectral/fullrun_mos2_xmm0109463801_pi300-10000_pass1_cl_src1_pl.csv
[Thu Mar 15 10:31:33 2012] Spectral fit parameter nH value = 1.8721e+15
[Thu Mar 15 10:31:33 2012] Spectral fit parameter PhoIndex value = 1.98057
[Thu Mar 15 10:31:33 2012] Failed to get F(0.3-8.0) from xmm0109463801/analysis//spectral/fullrun_mos2_xmm0109463801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Mar 15 10:31:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 10:31:33 2012] Using Nh = 1.9e+15, photon index=1.98, rate=0.0629, arf fullrun_mos2_xmm0109463801_pi300-10000_pass1_cl_src1.arf
[Thu Mar 15 10:31:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 10:31:33 2012] Updating source flux to 7.9e-13