[Sun Jul 29 09:37:23 2012] Detection parameters:
  Position = (225.0, 279.1) = 18 47 49.52 55 37 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.6 +/- 11.6
  Background counts = 17.4
  Rate = 0.08 +/- 0.02

[Sun Jul 29 09:37:23 2012] Off-axis axis estimate = 5.51'
[Sun Jul 29 09:39:05 2012] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 09:39:05 2012] Initial guess for spatial extent in simple fitting = 9.18"
[Sun Jul 29 09:39:05 2012] source mask rpix=2.1, npix_max = 27, mask sum = 35, frac = 1.284
[Sun Jul 29 09:39:05 2012] Giving source the simple spatial ID 88 for pass 0, mean size = 9.18"
[Sun Jul 29 17:54:42 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src88.ximg exists
[Sun Jul 29 17:54:42 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src88_1.ximg exists
[Sun Jul 29 17:54:42 2012] Fit fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src88 appears to have run properly
[Sun Jul 29 17:54:45 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Sun Jul 29 17:54:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src88.csv
[Sun Jul 29 17:54:45 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Sun Jul 29 17:54:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src88.csv
[Sun Jul 29 17:54:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src88_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 17:58:17 2012] Spatial fit model total counts = 409.389000, observed total counts = 390.000000
[Sun Jul 29 17:58:17 2012] Offset between fit and detection position for source 88 = 0.676708 pixels
[Sun Jul 29 17:58:17 2012] 400.403700 total counts/ 310.922000 bgd. counts: snr = 5.074678
Spatial fit parameters:
  Offset between fit and detection position for source 88 = 0.676708 pixels
  Position = (225.0, 278.4) = 18 47 49.53 55 37 15.7
  Extent = 18.4 (15.2-36.7)" x 9.0 (5.9-13.0)", rotation angle = 322 (300-339) degrees
  Source counts = 89.5 +/- 20.0
  Background counts = 310.9
  Rate = 0.1 +/- 0.03
[Sun Jul 29 17:58:17 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 17:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 17:58:17 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 17:58:17 2012] Source does appear to be extended
[Sun Jul 29 17:58:17 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.17
[Sun Jul 29 17:58:17 2012] Source is confused with source 85
[Sun Jul 29 17:58:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 29 17:58:28 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Sun Jul 29 17:58:28 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.919
[Sun Jul 29 17:58:28 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 13.70"
[Mon Jul 30 01:22:29 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src71.ximg exists
[Mon Jul 30 01:22:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src71.csv
[Mon Jul 30 01:22:29 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src71_1.ximg exists
[Mon Jul 30 01:22:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src71.csv
[Mon Jul 30 01:22:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:22:34 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Mon Jul 30 01:22:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src71.csv
[Mon Jul 30 01:22:34 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Mon Jul 30 01:22:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src71.csv
[Mon Jul 30 01:22:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:26:26 2012] Warning, spatial fit 71 centroid is now closest to src. 85
[Mon Jul 30 01:26:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:26:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:26:26 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 01:26:26 2012] Source does appear to be extended
[Mon Jul 30 01:26:26 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.17
[Mon Jul 30 01:26:40 2012] XMMSAS src. selection expression = ellipse(19523.010540, 24172.917600, 1101.924032, 542.390416, 321.637000, X, Y)
[Mon Jul 30 01:26:40 2012] Writing source region out to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src88_src.reg
[Mon Jul 30 01:26:40 2012] Extracting stamp from image fullrun_pn_xmm0109463701_pi300-10000_cl_sm2.00.img.gz, (162, 215) - (288, 342)
[Mon Jul 30 01:26:40 2012] XMMSAS bgd. selection expression = annulus(19523.010540, 24172.917600, 1836.540053, 3673.080106, X, Y) && !ellipse(16730.966553, 22768.720886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17088.790000, 23089.082000, 1675.816048, 1675.816048, 0.000000, X, Y) && !ellipse(17937.792862, 23463.852692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18505.849655, 23617.624023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22570.857483, 28040.544403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23458.837341, 28089.850952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23439.460938, 27289.009155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23244.735488, 26822.160400, 1148.904033, 1148.904033, 0.000000, X, Y) && !ellipse(23730.252000, 26582.369400, 1208.320035, 1208.320035, 0.000000, X, Y) && !ellipse(21863.313416, 25957.615509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22507.436798, 25807.861237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21475.320709, 25623.514587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18166.085556, 25260.837585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20088.578995, 24921.238098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18869.593979, 24641.172333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18147.283966, 24123.712433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17628.515137, 24088.315582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18648.210999, 24142.552521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19221.646881, 23934.191132, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 01:26:40 2012] Writing fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src88.gif
[Mon Jul 30 02:22:04 2012] Mean detx,y = (-2906.26, 8014.32) 
[Mon Jul 30 02:22:06 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 02:22:38 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 02:22:39 2012] Setting source spectrum file to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Mon Jul 30 02:22:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Mon Jul 30 03:28:02 2012] Not generating rmf since there are only 89 counts
[Mon Jul 30 03:28:02 2012] rmf not generated due to insufficient counts
[Mon Jul 30 03:32:50 2012] Updating aperture counts using extracted products
[Mon Jul 30 03:32:50 2012] Error reading totcts from fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Mon Jul 30 03:32:51 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 03:32:51 2012] Using photon index=1.80, rate=0.131, arf fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src88.arf
[Mon Jul 30 03:32:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 03:32:51 2012] Updating source flux to 6.3e-13
[Mon Jul 30 03:32:55 2012] Flag c found in src. 88 procflags, skipping spectral fitting
[Mon Jul 30 03:32:55 2012] Source 88 has fewer than 100.000000 counts, skipping spectral fitting