[Sun Jul 29 09:37:23 2012] Detection parameters:
  Position = (269.1, 310.0) = 18 47 26.89 55 39 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.5 +/- 12.8
  Background counts = 22.0
  Rate = 0.2 +/- 0.03

[Sun Jul 29 09:37:23 2012] Off-axis axis estimate = 2.29'
[Sun Jul 29 09:39:05 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 09:39:05 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Sun Jul 29 09:39:05 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.796
[Sun Jul 29 09:39:05 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 7.57"
[Sun Jul 29 17:54:42 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src77.ximg exists
[Sun Jul 29 17:54:42 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src77_1.ximg exists
[Sun Jul 29 17:54:42 2012] Fit fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src77 appears to have run properly
[Sun Jul 29 17:54:44 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Sun Jul 29 17:54:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src77.csv
[Sun Jul 29 17:54:44 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Sun Jul 29 17:54:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src77.csv
[Sun Jul 29 17:54:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 17:58:17 2012] Spatial fit model total counts = 485.386000, observed total counts = 446.000000
[Sun Jul 29 17:58:17 2012] Offset between fit and detection position for source 77 = 3.636370 pixels
[Sun Jul 29 17:58:17 2012] Warning, changing simple spatial fit ID from 77 to 75
[Sun Jul 29 17:58:17 2012] 452.719100 total counts/ 354.545000 bgd. counts: snr = 5.213883
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 3.636370 pixels
  Position = (265.7, 311.4) = 18 47 28.64 55 39 39.4
  Extent = 14.1" x 14.1", rotation angle = 314
  Source counts = 98.2 +/- 21.3
  Background counts = 354.5
  Rate = 0.1 +/- 0.03
[Sun Jul 29 17:58:17 2012] Spatial fit model total counts = 524.003000, observed total counts = 531.000000
[Sun Jul 29 17:58:17 2012] Offset between fit and detection position for source 77 = 3.251587 pixels
[Sun Jul 29 17:58:17 2012] Warning, changing simple spatial fit ID from 75 to 77
[Sun Jul 29 17:58:17 2012] 495.328900 total counts/ 399.834000 bgd. counts: snr = 4.775736
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 3.251587 pixels
  Position = (267.7, 308.9) = 18 47 27.57 55 39 28.5
  Extent = 14.4" x 14.4", rotation angle = 0
  Source counts = 95.5 +/- 22.3
  Background counts = 399.8
  Rate = 0.1 +/- 0.03
[Sun Jul 29 17:58:17 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 17:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 17:58:17 2012] Assessing source extent using major
[Sun Jul 29 17:58:17 2012] Source does appear to be extended
[Sun Jul 29 17:58:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 17:58:17 2012] Source is confused with source 75
[Sun Jul 29 17:58:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 29 17:58:28 2012] Initial guess for spatial extent in simple fitting = 14.36"
[Sun Jul 29 17:58:28 2012] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.107
[Sun Jul 29 17:58:28 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 14.36"
[Mon Jul 30 01:22:29 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src61.ximg exists
[Mon Jul 30 01:22:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src61.csv
[Mon Jul 30 01:22:29 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src61_1.ximg exists
[Mon Jul 30 01:22:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src61.csv
[Mon Jul 30 01:22:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:22:33 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Mon Jul 30 01:22:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src61.csv
[Mon Jul 30 01:22:33 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Mon Jul 30 01:22:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src61.csv
[Mon Jul 30 01:22:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:26:26 2012] Spatial fit model total counts = 671.512000, observed total counts = 446.000000
[Mon Jul 30 01:26:26 2012] Poor agreement between spatial fit and data for source 77
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 30 01:26:26 2012] Warning, spatial fit 61 centroid is now closest to src. 75
[Mon Jul 30 01:26:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:26:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:26:26 2012] Assessing source extent using major
[Mon Jul 30 01:26:26 2012] Source does appear to be extended
[Mon Jul 30 01:26:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 01:26:39 2012] XMMSAS src. selection expression = ellipse(23244.735488, 26822.160400, 861.678025, 861.678025, 0.000000, X, Y)
[Mon Jul 30 01:26:39 2012] Writing source region out to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src77_src.reg
[Mon Jul 30 01:26:39 2012] Extracting stamp from image fullrun_pn_xmm0109463701_pi300-10000_cl_sm2.00.img.gz, (218, 259) - (317, 358)
[Mon Jul 30 01:26:39 2012] XMMSAS bgd. selection expression = annulus(23244.735488, 26822.160400, 1436.130041, 2872.260083, X, Y) && !ellipse(25612.178000, 30708.220000, 2594.976075, 2594.976075, 0.000000, X, Y) && !ellipse(24215.767609, 30489.612457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23999.244000, 29564.850000, 1289.360037, 1289.360037, 0.000000, X, Y) && !ellipse(24063.398400, 29965.768000, 1353.888039, 1353.888039, 0.000000, X, Y) && !ellipse(23097.039000, 30262.712800, 1169.136034, 513.592015, 37.271600, X, Y) && !ellipse(26158.664800, 29980.763200, 1299.008037, 1299.008037, 0.000000, X, Y) && !ellipse(26236.444031, 29601.685699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25506.419830, 29358.485016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23095.624023, 29258.589539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22431.968200, 29263.039220, 735.888021, 735.888021, 0.000000, X, Y) && !ellipse(26312.120331, 28853.883423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26850.435486, 28885.605713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.765045, 28876.692780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24472.872681, 28694.459534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25660.820404, 28134.622711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22570.857483, 28040.544403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23458.837341, 28089.850952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26233.518188, 28053.641663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25772.058167, 27623.094147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24679.744598, 27868.365753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23439.460938, 27289.009155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24942.045563, 27065.054779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24484.626495, 27015.817261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23730.252000, 26582.369400, 1208.320035, 1208.320035, 0.000000, X, Y) && !ellipse(21863.313416, 25957.615509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22507.436798, 25807.861237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21475.320709, 25623.514587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20088.578995, 24921.238098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19523.010540, 24172.917600, 1469.232042, 723.187221, 321.637000, X, Y)
[Mon Jul 30 01:26:39 2012] Writing fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src77.gif
[Mon Jul 30 02:18:29 2012] Mean detx,y = (-3072.72, 3382.01) 
[Mon Jul 30 02:18:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 02:18:49 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 02:18:49 2012] Setting source spectrum file to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Mon Jul 30 02:18:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Mon Jul 30 03:24:13 2012] Not generating rmf since there are only 95 counts
[Mon Jul 30 03:24:13 2012] rmf not generated due to insufficient counts
[Mon Jul 30 03:32:50 2012] Updating aperture counts using extracted products
[Mon Jul 30 03:32:50 2012] Error reading totcts from fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Mon Jul 30 03:32:51 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 03:32:51 2012] Using photon index=1.80, rate=0.14, arf fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src77.arf
[Mon Jul 30 03:32:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 03:32:51 2012] Updating source flux to 4.3e-13
[Mon Jul 30 03:32:55 2012] Flag p found in src. 77 procflags, skipping spectral fitting
[Mon Jul 30 03:32:55 2012] Flag c found in src. 77 procflags, skipping spectral fitting
[Mon Jul 30 03:32:55 2012] Source 77 has fewer than 100.000000 counts, skipping spectral fitting