[Sun Jul 29 09:37:22 2012] Detection parameters:
  Position = (309.2, 332.6) = 18 47 6.26 55 41 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.4 +/- 11.4
  Background counts = 9.3
  Rate = 0.1 +/- 0.02

[Sun Jul 29 09:37:23 2012] Off-axis axis estimate = 2.59'
[Sun Jul 29 09:39:05 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 09:39:05 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Sun Jul 29 09:39:05 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.965
[Sun Jul 29 09:39:05 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 7.73"
[Sun Jul 29 17:54:41 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src63.ximg exists
[Sun Jul 29 17:54:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src63.csv
[Sun Jul 29 17:54:41 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src63_1.ximg exists
[Sun Jul 29 17:54:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src63.csv
[Sun Jul 29 17:54:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 17:54:44 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sun Jul 29 17:54:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src63.csv
[Sun Jul 29 17:54:44 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sun Jul 29 17:54:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src63.csv
[Sun Jul 29 17:54:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 17:58:17 2012] Spatial fit model total counts = 377.443000, observed total counts = 339.000000
[Sun Jul 29 17:58:17 2012] Poor agreement between spatial fit and data for source 63
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 29 17:58:17 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 17:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 17:58:17 2012] Assessing source extent using major
[Sun Jul 29 17:58:17 2012] Source does appear to be extended
[Sun Jul 29 17:58:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 17:58:17 2012] Source is confused with source 61
[Sun Jul 29 17:58:28 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 17:58:28 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Sun Jul 29 17:58:28 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.965
[Sun Jul 29 17:58:28 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 7.73"
[Mon Jul 30 01:22:29 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src48.ximg exists
[Mon Jul 30 01:22:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src48.csv
[Mon Jul 30 01:22:29 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src48_1.ximg exists
[Mon Jul 30 01:22:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src48.csv
[Mon Jul 30 01:22:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:22:33 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Mon Jul 30 01:22:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src48.csv
[Mon Jul 30 01:22:33 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Mon Jul 30 01:22:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src48.csv
[Mon Jul 30 01:22:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:26:26 2012] Spatial fit model total counts = 526.578000, observed total counts = 410.000000
[Mon Jul 30 01:26:26 2012] Poor agreement between spatial fit and data for source 63
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 30 01:26:26 2012] Source 63 is offset by -0.864190 and -7.471429 pixels which is larger than
2 X fitted extent = 0.880920 x 0.880920, not incorporating fit results
[Mon Jul 30 01:26:26 2012] Spatial fit model total counts = 377.343000, observed total counts = 339.000000
[Mon Jul 30 01:26:26 2012] Poor agreement between spatial fit and data for source 63
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 30 01:26:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:26:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:26:26 2012] Assessing source extent using major
[Mon Jul 30 01:26:26 2012] Source does appear to be extended
[Mon Jul 30 01:26:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 01:26:39 2012] XMMSAS src. selection expression = ellipse(26850.435486, 28885.605713, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 01:26:39 2012] Writing source region out to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src63_src.reg
[Mon Jul 30 01:26:39 2012] Extracting stamp from image fullrun_pn_xmm0109463701_pi300-10000_cl_sm2.00.img.gz, (272, 295) - (347, 370)
[Mon Jul 30 01:26:39 2012] XMMSAS bgd. selection expression = annulus(26850.435486, 28885.605713, 1087.500000, 2175.000000, X, Y) && !ellipse(23953.602000, 33611.826000, 3162.800091, 3162.800091, 0.000000, X, Y) && !ellipse(23831.521149, 31823.440765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24761.816864, 31616.778595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24945.980316, 31266.309418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25612.178000, 30708.220000, 2594.976075, 2594.976075, 0.000000, X, Y) && !ellipse(24215.767609, 30489.612457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23999.244000, 29564.850000, 1289.360037, 1289.360037, 0.000000, X, Y) && !ellipse(24063.398400, 29965.768000, 1353.888039, 1353.888039, 0.000000, X, Y) && !ellipse(26158.664800, 29980.763200, 1299.008037, 1299.008037, 0.000000, X, Y) && !ellipse(26236.444031, 29601.685699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25506.419830, 29358.485016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26312.120331, 28853.883423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.765045, 28876.692780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24472.872681, 28694.459534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27047.948425, 28466.891663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25660.820404, 28134.622711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26233.518188, 28053.641663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25772.058167, 27623.094147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24679.744598, 27868.365753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24942.045563, 27065.054779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24484.626495, 27015.817261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23730.252000, 26582.369400, 1208.320035, 1208.320035, 0.000000, X, Y)
[Mon Jul 30 01:26:39 2012] Writing fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src63.gif
[Mon Jul 30 02:13:25 2012] Mean detx,y = (-3151.11, -597.27) 
[Mon Jul 30 02:13:27 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 02:13:55 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 02:13:55 2012] Setting source spectrum file to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Mon Jul 30 02:13:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Mon Jul 30 03:21:49 2012] Not generating rmf since there are only 81 counts
[Mon Jul 30 03:21:49 2012] rmf not generated due to insufficient counts
[Mon Jul 30 03:32:50 2012] Updating aperture counts using extracted products
[Mon Jul 30 03:32:50 2012] Error reading totcts from fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Mon Jul 30 03:32:51 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 03:32:51 2012] Using photon index=1.80, rate=0.114, arf fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src63.arf
[Mon Jul 30 03:32:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 03:32:51 2012] Updating source flux to 4.2e-13
[Mon Jul 30 03:32:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting