[Sun Jul 29 09:37:22 2012] Detection parameters:
  Position = (259.7, 336.4) = 18 47 31.71 55 41 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.6 +/- 13.4
  Background counts = 40.1
  Rate = 0.08 +/- 0.02

[Sun Jul 29 09:37:23 2012] Off-axis axis estimate = 3.93'
[Sun Jul 29 09:39:05 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 09:39:05 2012] Initial guess for spatial extent in simple fitting = 8.39"
[Sun Jul 29 09:39:05 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.059
[Sun Jul 29 09:39:05 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 8.39"
[Sun Jul 29 17:54:41 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src60.ximg exists
[Sun Jul 29 17:54:41 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src60_1.ximg exists
[Sun Jul 29 17:54:41 2012] Fit fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src60 appears to have run properly
[Sun Jul 29 17:54:44 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Sun Jul 29 17:54:44 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Sun Jul 29 17:54:44 2012] Fit fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly
[Sun Jul 29 17:58:17 2012] Source 60 is offset by 2.960339 and -4.667371 pixels which is larger than
2 X fitted extent = 0.991991 x 0.991991, not incorporating fit results
[Sun Jul 29 17:58:17 2012] Spatial fit model total counts = 594.001000, observed total counts = 594.000000
[Sun Jul 29 17:58:17 2012] Offset between fit and detection position for source 60 = 1.417977 pixels
[Sun Jul 29 17:58:17 2012] 562.925400 total counts/ 513.727000 bgd. counts: snr = 2.170625
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 1.417977 pixels
  Position = (258.4, 336.9) = 18 47 32.39 55 41 30.5
  Extent = 9.2 (2.4-16.8)", rotation angle = 0
  Source counts = 49.2 +/- 23.7
  Background counts = 513.7
  Rate = 0.07 +/- 0.03
[Sun Jul 29 17:58:17 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 17:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 17:58:17 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 17:58:17 2012] Source does appear to be extended
[Sun Jul 29 17:58:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 17:58:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 29 17:58:28 2012] Initial guess for spatial extent in simple fitting = 9.20"
[Sun Jul 29 17:58:28 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.097
[Sun Jul 29 17:58:28 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 9.20"
[Mon Jul 30 01:22:29 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src46.ximg exists
[Mon Jul 30 01:22:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src46.csv
[Mon Jul 30 01:22:29 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src46_1.ximg exists
[Mon Jul 30 01:22:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src46.csv
[Mon Jul 30 01:22:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:22:32 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Mon Jul 30 01:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src46.csv
[Mon Jul 30 01:22:32 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Mon Jul 30 01:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src46.csv
[Mon Jul 30 01:22:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:26:26 2012] Warning, spatial fit 46 centroid is now closest to src. 59
[Mon Jul 30 01:26:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:26:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:26:26 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 01:26:26 2012] Source does appear to be extended
[Mon Jul 30 01:26:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 01:26:39 2012] XMMSAS src. selection expression = ellipse(22431.968200, 29263.039220, 551.916016, 551.916016, 0.000000, X, Y)
[Mon Jul 30 01:26:39 2012] Writing source region out to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src60_src.reg
[Mon Jul 30 01:26:39 2012] Extracting stamp from image fullrun_pn_xmm0109463701_pi300-10000_cl_sm2.00.img.gz, (227, 305) - (290, 369)
[Mon Jul 30 01:26:39 2012] XMMSAS bgd. selection expression = annulus(22431.968200, 29263.039220, 919.860026, 1839.720053, X, Y) && !ellipse(23953.602000, 33611.826000, 3162.800091, 3162.800091, 0.000000, X, Y) && !ellipse(23831.521149, 31823.440765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24761.816864, 31616.778595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24945.980316, 31266.309418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25612.178000, 30708.220000, 2594.976075, 2594.976075, 0.000000, X, Y) && !ellipse(24215.767609, 30489.612457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23999.244000, 29564.850000, 1289.360037, 1289.360037, 0.000000, X, Y) && !ellipse(24063.398400, 29965.768000, 1353.888039, 1353.888039, 0.000000, X, Y) && !ellipse(23097.039000, 30262.712800, 1169.136034, 513.592015, 37.271600, X, Y) && !ellipse(23095.624023, 29258.589539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.765045, 28876.692780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24472.872681, 28694.459534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22570.857483, 28040.544403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23458.837341, 28089.850952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24679.744598, 27868.365753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23439.460938, 27289.009155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24942.045563, 27065.054779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23244.735488, 26822.160400, 1148.904033, 1148.904033, 0.000000, X, Y) && !ellipse(24484.626495, 27015.817261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23730.252000, 26582.369400, 1208.320035, 1208.320035, 0.000000, X, Y)
[Mon Jul 30 01:26:39 2012] Writing fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src60.gif
[Mon Jul 30 02:12:42 2012] Mean detx,y = (-5677.73, 2918.75) 
[Mon Jul 30 02:12:43 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 02:12:56 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 02:12:56 2012] Setting source spectrum file to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Jul 30 02:12:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Mon Jul 30 03:21:35 2012] Not generating rmf since there are only 49 counts
[Mon Jul 30 03:21:35 2012] rmf not generated due to insufficient counts
[Mon Jul 30 03:32:50 2012] Updating aperture counts using extracted products
[Mon Jul 30 03:32:50 2012] Error reading totcts from fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Jul 30 03:32:51 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 03:32:51 2012] Using photon index=1.80, rate=0.072, arf fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src60.arf
[Mon Jul 30 03:32:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 03:32:51 2012] Updating source flux to 2.6e-13
[Mon Jul 30 03:32:55 2012] Flag b found in src. 60 procflags, skipping spectral fitting
[Mon Jul 30 03:32:55 2012] Source 60 has fewer than 100.000000 counts, skipping spectral fitting