[Sun Jul 29 09:37:22 2012] Detection parameters:
  Position = (274.5, 366.3) = 18 47 24.12 55 43 43.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.5 +/- 11.3
  Background counts = 24.8
  Rate = 0.09 +/- 0.02

[Sun Jul 29 09:37:23 2012] Off-axis axis estimate = 5.22'
[Sun Jul 29 09:39:05 2012] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 09:39:05 2012] Initial guess for spatial extent in simple fitting = 9.04"
[Sun Jul 29 09:39:05 2012] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.865
[Sun Jul 29 09:39:05 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 9.04"
[Sun Jul 29 17:54:40 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src41.ximg exists
[Sun Jul 29 17:54:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src41.csv
[Sun Jul 29 17:54:40 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun Jul 29 17:54:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src41.csv
[Sun Jul 29 17:54:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 17:54:43 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun Jul 29 17:54:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sun Jul 29 17:54:43 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun Jul 29 17:54:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sun Jul 29 17:54:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 17:58:17 2012] Source 41 is offset by 8.239399 and -5.335380 pixels which is larger than
2 X fitted extent = 1.074110 x 1.074110, not incorporating fit results
[Sun Jul 29 17:58:17 2012] Spatial fit model total counts = 544.754000, observed total counts = 423.000000
[Sun Jul 29 17:58:17 2012] Poor agreement between spatial fit and data for source 41
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 29 17:58:17 2012] Spatial fit model total counts = 532.317000, observed total counts = 481.000000
[Sun Jul 29 17:58:17 2012] Poor agreement between spatial fit and data for source 41
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 29 17:58:17 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 17:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 17:58:17 2012] Assessing source extent using major
[Sun Jul 29 17:58:17 2012] Source does appear to be extended
[Sun Jul 29 17:58:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 17:58:17 2012] Source is confused with source 43
[Sun Jul 29 17:58:28 2012] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 17:58:28 2012] Initial guess for spatial extent in simple fitting = 9.04"
[Sun Jul 29 17:58:28 2012] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.865
[Sun Jul 29 17:58:28 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 9.04"
[Mon Jul 30 01:22:28 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src32.ximg exists
[Mon Jul 30 01:22:28 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src32_1.ximg exists
[Mon Jul 30 01:22:28 2012] Fit fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src32 appears to have run properly
[Mon Jul 30 01:22:31 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Mon Jul 30 01:22:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src32.csv
[Mon Jul 30 01:22:31 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Mon Jul 30 01:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src32.csv
[Mon Jul 30 01:22:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:26:26 2012] Warning, spatial fit 32 centroid is now closest to src. 45
[Mon Jul 30 01:26:26 2012] Spatial fit model total counts = 540.387000, observed total counts = 481.000000
[Mon Jul 30 01:26:26 2012] Poor agreement between spatial fit and data for source 41
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 30 01:26:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:26:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:26:26 2012] Assessing source extent using major
[Mon Jul 30 01:26:26 2012] Source does appear to be extended
[Mon Jul 30 01:26:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 01:26:38 2012] XMMSAS src. selection expression = ellipse(23831.521149, 31823.440765, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 01:26:38 2012] Writing source region out to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src41_src.reg
[Mon Jul 30 01:26:38 2012] Extracting stamp from image fullrun_pn_xmm0109463701_pi300-10000_cl_sm2.00.img.gz, (237, 329) - (312, 404)
[Mon Jul 30 01:26:38 2012] XMMSAS bgd. selection expression = annulus(23831.521149, 31823.440765, 1087.500000, 2175.000000, X, Y) && !ellipse(22862.140000, 35182.818000, 3229.056093, 3229.056093, 0.000000, X, Y) && !ellipse(23890.604000, 33924.610000, 1539.192044, 1539.192044, 0.000000, X, Y) && !ellipse(23463.430000, 33972.152000, 1614.528046, 1614.528046, 0.000000, X, Y) && !ellipse(23263.176200, 34331.060000, 1581.400046, 1581.400046, 0.000000, X, Y) && !ellipse(22530.272705, 34494.827698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20734.126000, 34376.600000, 1712.808049, 1712.808049, 0.000000, X, Y) && !ellipse(22517.008179, 33900.374603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23953.602000, 33611.826000, 3162.800091, 3162.800091, 0.000000, X, Y) && !ellipse(22776.885400, 32884.426000, 1565.872045, 1565.872045, 0.000000, X, Y) && !ellipse(21760.342087, 32930.333099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25026.008209, 32117.864929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24761.816864, 31616.778595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24945.980316, 31266.309418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25612.178000, 30708.220000, 2594.976075, 2594.976075, 0.000000, X, Y) && !ellipse(24215.767609, 30489.612457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23999.244000, 29564.850000, 1289.360037, 1289.360037, 0.000000, X, Y) && !ellipse(24063.398400, 29965.768000, 1353.888039, 1353.888039, 0.000000, X, Y) && !ellipse(23097.039000, 30262.712800, 1169.136034, 513.592015, 37.271600, X, Y) && !ellipse(26158.664800, 29980.763200, 1299.008037, 1299.008037, 0.000000, X, Y) && !ellipse(26236.444031, 29601.685699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25506.419830, 29358.485016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23095.624023, 29258.589539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22431.968200, 29263.039220, 735.888021, 735.888021, 0.000000, X, Y) && !ellipse(26312.120331, 28853.883423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26850.435486, 28885.605713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.765045, 28876.692780, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 01:26:38 2012] Writing fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src41.gif
[Mon Jul 30 02:06:17 2012] Mean detx,y = (-7161.19, 465.69) 
[Mon Jul 30 02:06:19 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 02:06:41 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 02:06:41 2012] Setting source spectrum file to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Mon Jul 30 02:06:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Mon Jul 30 03:13:13 2012] Not generating rmf since there are only 65 counts
[Mon Jul 30 03:13:13 2012] rmf not generated due to insufficient counts
[Mon Jul 30 03:32:49 2012] Updating aperture counts using extracted products
[Mon Jul 30 03:32:49 2012] Error reading totcts from fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Mon Jul 30 03:32:51 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 03:32:51 2012] Using photon index=1.80, rate=0.0915, arf fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src41.arf
[Mon Jul 30 03:32:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 03:32:51 2012] Updating source flux to 4e-13
[Mon Jul 30 03:32:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting