[Sun Jul 29 09:37:21 2012] Detection parameters:
  Position = (273.7, 393.1) = 18 47 24.52 55 45 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.1 +/- 11.4
  Background counts = 18.3
  Rate = 0.08 +/- 0.02

[Sun Jul 29 09:37:23 2012] Off-axis axis estimate = 7.09'
[Sun Jul 29 09:39:05 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 09:39:05 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Sun Jul 29 09:39:05 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.154
[Sun Jul 29 09:39:05 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 9.97"
[Sun Jul 29 17:54:40 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src19.ximg exists
[Sun Jul 29 17:54:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src19.csv
[Sun Jul 29 17:54:40 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Jul 29 17:54:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src19.csv
[Sun Jul 29 17:54:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 17:54:43 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Jul 29 17:54:43 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Jul 29 17:54:43 2012] Fit fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Jul 29 17:58:17 2012] Spatial fit model total counts = 468.660000, observed total counts = 446.000000
[Sun Jul 29 17:58:17 2012] Offset between fit and detection position for source 19 = 4.491127 pixels
[Sun Jul 29 17:58:17 2012] 393.689000 total counts/ 214.699000 bgd. counts: snr = 12.215571
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 4.491127 pixels
  Position = (277.6, 390.7) = 18 47 22.55 55 45 24.5
  Extent = 19.9 (19.9-19.9)", rotation angle = 0
  Source counts = 179.0 +/- 19.8
  Background counts = 214.7
  Rate = 0.3 +/- 0.03
[Sun Jul 29 17:58:17 2012] Spatial fit model total counts = 454.698000, observed total counts = 417.000000
[Sun Jul 29 17:58:17 2012] Offset between fit and detection position for source 19 = 2.403500 pixels
[Sun Jul 29 17:58:17 2012] Warning, changing simple spatial fit ID from 19 to 30
[Sun Jul 29 17:58:17 2012] 403.901000 total counts/ 160.489000 bgd. counts: snr = 19.214069
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 2.403500 pixels
  Position = (275.2, 390.5) = 18 47 23.78 55 45 23.6
  Extent = 19.2 (19.2-38.5)", rotation angle = 0
  Source counts = 243.4 +/- 20.1
  Background counts = 160.5
  Rate = 0.4 +/- 0.03
[Sun Jul 29 17:58:17 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 17:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 17:58:17 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 17:58:17 2012] Source does appear to be extended
[Sun Jul 29 17:58:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 17:58:17 2012] Source is confused with source 20
[Sun Jul 29 17:58:17 2012] Source is confused with source 22
[Sun Jul 29 17:58:17 2012] Source is confused with source 30
[Sun Jul 29 17:58:17 2012] Source is confused with source 32
[Sun Jul 29 17:58:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 29 17:58:28 2012] Initial guess for spatial extent in simple fitting = 19.24"
[Sun Jul 29 17:58:28 2012] source mask rpix=4.4, npix_max = 96, mask sum = 85, frac = 0.877
[Sun Jul 29 17:58:28 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 19.24"
[Mon Jul 30 01:22:28 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src16.ximg exists
[Mon Jul 30 01:22:28 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src16_1.ximg exists
[Mon Jul 30 01:22:28 2012] Fit fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src16 appears to have run properly
[Mon Jul 30 01:22:30 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Mon Jul 30 01:22:30 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Mon Jul 30 01:22:30 2012] Fit fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Mon Jul 30 01:26:25 2012] Warning, spatial fit 16 centroid is now closest to src. 30
[Mon Jul 30 01:26:26 2012] Spatial fit model total counts = 591.485000, observed total counts = 537.000000
[Mon Jul 30 01:26:26 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 30 01:26:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:26:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:26:26 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 01:26:26 2012] Source does appear to be extended
[Mon Jul 30 01:26:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 01:26:37 2012] XMMSAS src. selection expression = ellipse(23890.604000, 33924.610000, 1154.394033, 1154.394033, 0.000000, X, Y)
[Mon Jul 30 01:26:37 2012] Writing source region out to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src19_src.reg
[Mon Jul 30 01:26:37 2012] Extracting stamp from image fullrun_pn_xmm0109463701_pi300-10000_cl_sm2.00.img.gz, (209, 324) - (342, 457)
[Mon Jul 30 01:26:37 2012] XMMSAS bgd. selection expression = annulus(23890.604000, 33924.610000, 1923.990055, 3847.980111, X, Y) && !ellipse(20972.556396, 38327.410278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21567.340000, 37635.684000, 3486.304100, 3486.304100, 0.000000, X, Y) && !ellipse(21706.566000, 37851.744000, 1112.832032, 1112.832032, 0.000000, X, Y) && !ellipse(22096.966614, 37060.860413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22521.283600, 36983.741200, 857.152025, 857.152025, 0.000000, X, Y) && !ellipse(22242.970000, 36574.610000, 1743.152050, 1743.152050, 0.000000, X, Y) && !ellipse(22472.597504, 36066.220062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21499.026138, 35875.835876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22862.140000, 35182.818000, 3229.056093, 3229.056093, 0.000000, X, Y) && !ellipse(22941.881600, 35324.362200, 862.104025, 862.104025, 0.000000, X, Y) && !ellipse(23463.430000, 33972.152000, 1614.528046, 1614.528046, 0.000000, X, Y) && !ellipse(23263.176200, 34331.060000, 1581.400046, 1581.400046, 0.000000, X, Y) && !ellipse(22530.272705, 34494.827698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20734.126000, 34376.600000, 1712.808049, 1712.808049, 0.000000, X, Y) && !ellipse(22517.008179, 33900.374603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20324.609772, 33636.708954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23953.602000, 33611.826000, 3162.800091, 3162.800091, 0.000000, X, Y) && !ellipse(22776.885400, 32884.426000, 1565.872045, 1565.872045, 0.000000, X, Y) && !ellipse(21760.342087, 32930.333099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25026.008209, 32117.864929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23831.521149, 31823.440765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24761.816864, 31616.778595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24945.980316, 31266.309418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25612.178000, 30708.220000, 2594.976075, 2594.976075, 0.000000, X, Y) && !ellipse(24215.767609, 30489.612457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23999.244000, 29564.850000, 1289.360037, 1289.360037, 0.000000, X, Y) && !ellipse(24063.398400, 29965.768000, 1353.888039, 1353.888039, 0.000000, X, Y) && !ellipse(23097.039000, 30262.712800, 1169.136034, 513.592015, 37.271600, X, Y) && !ellipse(26158.664800, 29980.763200, 1299.008037, 1299.008037, 0.000000, X, Y) && !ellipse(26236.444031, 29601.685699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25506.419830, 29358.485016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23095.624023, 29258.589539, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 01:26:37 2012] Writing fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src19.gif
[Mon Jul 30 01:47:45 2012] Mean detx,y = (-9056.71, -306.86) 
[Mon Jul 30 01:47:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 01:48:20 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 01:48:20 2012] Setting source spectrum file to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Jul 30 01:48:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Jul 30 03:32:49 2012] Updating aperture counts using extracted products
[Mon Jul 30 03:32:49 2012] Error reading totcts from fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Jul 30 03:32:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 03:32:50 2012] Using photon index=1.80, rate=0.356, arf fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src19.arf
[Mon Jul 30 03:32:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 03:32:50 2012] Updating source flux to 1.5e-12
[Mon Jul 30 03:32:55 2012] Flag p found in src. 19 procflags, skipping spectral fitting
[Mon Jul 30 03:32:55 2012] Flag c found in src. 19 procflags, skipping spectral fitting