[Sun Jul 29 09:37:21 2012] Detection parameters:
  Position = (253.2, 419.8) = 18 47 35.14 55 47 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.6 +/- 12.6
  Background counts = 20.3
  Rate = 0.09 +/- 0.02

[Sun Jul 29 09:37:23 2012] Off-axis axis estimate = 9.39'
[Sun Jul 29 09:39:05 2012] Using EEF radius (= 11.13 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 09:39:05 2012] Initial guess for spatial extent in simple fitting = 11.13"
[Sun Jul 29 09:39:05 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.963
[Sun Jul 29 09:39:05 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 11.13"
[Sun Jul 29 17:54:39 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src12.ximg exists
[Sun Jul 29 17:54:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src12.csv
[Sun Jul 29 17:54:40 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Jul 29 17:54:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src12.csv
[Sun Jul 29 17:54:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 17:54:42 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Jul 29 17:54:42 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Jul 29 17:54:42 2012] Fit fullrun_pn_xmm0109463701_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Jul 29 17:58:17 2012] Warning, spatial fit 12 centroid is now closest to src. 14
[Sun Jul 29 17:58:17 2012] Spatial fit model total counts = 474.500000, observed total counts = 467.000000
[Sun Jul 29 17:58:17 2012] Offset between fit and detection position for source 12 = 3.027573 pixels
[Sun Jul 29 17:58:17 2012] Warning, changing simple spatial fit ID from 12 to 13
[Sun Jul 29 17:58:17 2012] 447.747000 total counts/ 215.317000 bgd. counts: snr = 15.839921
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 3.027573 pixels
  Position = (256.0, 420.9) = 18 47 33.67 55 47 35.6
  Extent = 21.8 (21.7-43.6)", rotation angle = 0
  Source counts = 232.4 +/- 21.2
  Background counts = 215.3
  Rate = 0.3 +/- 0.03
[Sun Jul 29 17:58:17 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 17:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 17:58:17 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 17:58:17 2012] Source does appear to be extended
[Sun Jul 29 17:58:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 17:58:17 2012] Source is confused with source 7
[Sun Jul 29 17:58:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 29 17:58:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 29 17:58:28 2012] Initial guess for spatial extent in simple fitting = 21.79"
[Sun Jul 29 17:58:28 2012] source mask rpix=5.0, npix_max = 121, mask sum = 120, frac = 0.988
[Sun Jul 29 17:58:28 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 21.79"
[Mon Jul 30 01:22:28 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src11.ximg exists
[Mon Jul 30 01:22:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src11.csv
[Mon Jul 30 01:22:28 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Jul 30 01:22:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src11.csv
[Mon Jul 30 01:22:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:22:30 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Jul 30 01:22:30 2012] fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Jul 30 01:22:30 2012] Fit fullrun_pn_xmm0109463701_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Jul 30 01:26:25 2012] Warning, spatial fit 11 centroid is now closest to src. 6
[Mon Jul 30 01:26:25 2012] Spatial fit model total counts = 473.245000, observed total counts = 467.000000
[Mon Jul 30 01:26:25 2012] Offset between fit and detection position for source 12 = 0.225048 pixels
[Mon Jul 30 01:26:25 2012] Warning, changing simple spatial fit ID from 11 to 12
[Mon Jul 30 01:26:25 2012] 448.311000 total counts/ 230.800000 bgd. counts: snr = 14.317372
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.225048 pixels
  Position = (256.2, 421.0) = 18 47 33.57 55 47 36.0
  Extent = 21.8 (21.7-43.6)", rotation angle = 0
  Source counts = 217.5 +/- 21.2
  Background counts = 230.8
  Rate = 0.3 +/- 0.03
[Mon Jul 30 01:26:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:26:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:26:26 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 01:26:26 2012] Source does appear to be extended
[Mon Jul 30 01:26:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 01:26:37 2012] XMMSAS src. selection expression = ellipse(22242.970000, 36574.610000, 1307.364038, 1307.364038, 0.000000, X, Y)
[Mon Jul 30 01:26:37 2012] Writing source region out to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src12_src.reg
[Mon Jul 30 01:26:37 2012] Extracting stamp from image fullrun_pn_xmm0109463701_pi300-10000_cl_sm2.00.img.gz, (181, 346) - (331, 496)
[Mon Jul 30 01:26:37 2012] XMMSAS bgd. selection expression = annulus(22242.970000, 36574.610000, 2178.940063, 4357.880125, X, Y) && !ellipse(20231.229480, 40709.830000, 1258.240036, 1258.240036, 0.000000, X, Y) && !ellipse(20420.847210, 40396.866363, 2052.192059, 1132.041899, 60.467840, X, Y) && !ellipse(20740.828000, 39940.060000, 2052.192059, 689.116820, 60.703000, X, Y) && !ellipse(20972.556396, 38327.410278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21567.340000, 37635.684000, 3486.304100, 3486.304100, 0.000000, X, Y) && !ellipse(21706.566000, 37851.744000, 1112.832032, 1112.832032, 0.000000, X, Y) && !ellipse(22096.966614, 37060.860413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22521.283600, 36983.741200, 857.152025, 857.152025, 0.000000, X, Y) && !ellipse(22472.597504, 36066.220062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21499.026138, 35875.835876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22862.140000, 35182.818000, 3229.056093, 3229.056093, 0.000000, X, Y) && !ellipse(22941.881600, 35324.362200, 862.104025, 862.104025, 0.000000, X, Y) && !ellipse(23890.604000, 33924.610000, 1539.192044, 1539.192044, 0.000000, X, Y) && !ellipse(23463.430000, 33972.152000, 1614.528046, 1614.528046, 0.000000, X, Y) && !ellipse(23263.176200, 34331.060000, 1581.400046, 1581.400046, 0.000000, X, Y) && !ellipse(22530.272705, 34494.827698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20734.126000, 34376.600000, 1712.808049, 1712.808049, 0.000000, X, Y) && !ellipse(22517.008179, 33900.374603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20324.609772, 33636.708954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23953.602000, 33611.826000, 3162.800091, 3162.800091, 0.000000, X, Y) && !ellipse(22776.885400, 32884.426000, 1565.872045, 1565.872045, 0.000000, X, Y) && !ellipse(21760.342087, 32930.333099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25026.008209, 32117.864929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23831.521149, 31823.440765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24761.816864, 31616.778595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25612.178000, 30708.220000, 2594.976075, 2594.976075, 0.000000, X, Y) && !ellipse(19393.751168, 41822.731351, 1715.728832, 1645.629780, 0.000000, X, Y)
[Mon Jul 30 01:26:37 2012] Writing fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src12.gif
[Mon Jul 30 01:43:56 2012] Mean detx,y = (-12066.43, -156.02) 
[Mon Jul 30 01:43:58 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 01:44:38 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 01:44:38 2012] Setting source spectrum file to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Jul 30 01:44:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon Jul 30 03:32:49 2012] Updating aperture counts using extracted products
[Mon Jul 30 03:32:49 2012] Error reading totcts from fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Jul 30 03:32:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 03:32:50 2012] Using photon index=1.80, rate=0.318, arf fullrun_pn_xmm0109463701_pi300-10000_pass1_cl_src12.arf
[Mon Jul 30 03:32:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 03:32:50 2012] Updating source flux to 1.7e-12
[Mon Jul 30 03:32:55 2012] Flag c found in src. 12 procflags, skipping spectral fitting