[Mon Nov 28 02:59:47 2011] Detection parameters:
  Position = (321.3, 298.6) = 23 15 19.02 -59 10 29.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28.2 +/- 6.8
  Background counts = 2.7
  Rate = 0.005 +/- 0.001

[Mon Nov 28 02:59:47 2011] Off-axis axis estimate = 1.66'
[Mon Nov 28 03:23:49 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 03:23:49 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Nov 28 03:23:49 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Mon Nov 28 03:23:49 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.26"
[Mon Nov 28 03:43:44 2011] fullrun_mos2_xmm0109463601_pi300-10000_cl_pass0_src3.ximg exists
[Mon Nov 28 03:43:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109463601_pi300-10000_cl_pass0_src3.csv
[Mon Nov 28 03:43:44 2011] fullrun_mos2_xmm0109463601_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Nov 28 03:43:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109463601_pi300-10000_cl_pass0_src3.csv
[Mon Nov 28 03:43:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109463601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109463601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 03:43:45 2011] fullrun_mos2_xmm0109463601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Nov 28 03:43:45 2011] fullrun_mos2_xmm0109463601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Nov 28 03:43:45 2011] Fit fullrun_mos2_xmm0109463601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Nov 28 03:43:52 2011] Spatial fit model total counts = 49.983100, observed total counts = 50.000000
[Mon Nov 28 03:43:52 2011] Offset between fit and detection position for source 4 = 0.228073 pixels
[Mon Nov 28 03:43:52 2011] 50.617200 total counts/ 33.454600 bgd. counts: snr = 2.967257
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.228073 pixels
  Position = (321.1, 298.4) = 23 15 19.14 -59 10 29.6
  Extent = 3.8 (2.6-6.2)", rotation angle = 0
  Source counts = 17.2 +/- 7.1
  Background counts = 33.5
  Rate = 0.003 +/- 0.001
[Mon Nov 28 03:43:52 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 03:43:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 03:43:52 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 03:43:52 2011] Source does appear to be extended
[Mon Nov 28 03:43:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 04:06:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 04:06:35 2011] Initial guess for spatial extent in simple fitting = 3.79"
[Mon Nov 28 04:06:35 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.798
[Mon Nov 28 04:06:35 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 3.79"
[Mon Nov 28 04:27:09 2011] fullrun_mos2_xmm0109463601_pi300-10000_cl_pass1_src3.ximg exists
[Mon Nov 28 04:27:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109463601_pi300-10000_cl_pass1_src3.csv
[Mon Nov 28 04:27:09 2011] fullrun_mos2_xmm0109463601_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Nov 28 04:27:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109463601_pi300-10000_cl_pass1_src3.csv
[Mon Nov 28 04:27:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109463601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109463601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 04:27:09 2011] fullrun_mos2_xmm0109463601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Nov 28 04:27:09 2011] fullrun_mos2_xmm0109463601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Nov 28 04:27:09 2011] Fit fullrun_mos2_xmm0109463601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Nov 28 04:27:17 2011] Spatial fit model total counts = 49.676900, observed total counts = 50.000000
[Mon Nov 28 04:27:17 2011] Offset between fit and detection position for source 4 = 0.011093 pixels
[Mon Nov 28 04:27:17 2011] 50.302800 total counts/ 33.090500 bgd. counts: snr = 2.992177
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.011093 pixels
  Position = (321.1, 298.4) = 23 15 19.14 -59 10 29.7
  Extent = 4.0 (2.6-6.1)", rotation angle = 0
  Source counts = 17.2 +/- 7.1
  Background counts = 33.1
  Rate = 0.003 +/- 0.001
[Mon Nov 28 04:27:17 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 04:27:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 04:27:17 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 04:27:17 2011] Source does appear to be extended
[Mon Nov 28 04:27:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 04:31:15 2011] XMMSAS src. selection expression = ellipse(27886.547680, 25915.318600, 238.762979, 238.762979, 0.000000, X, Y)
[Mon Nov 28 04:31:15 2011] Writing source region out to fullrun_mos2_xmm0109463601_pi300-10000_pass1_cl_src4_src.reg
[Mon Nov 28 04:31:15 2011] Extracting stamp from image fullrun_mos2_xmm0109463601_pi300-10000_cl_sm2.00.img.gz, (307, 285) - (335, 312)
[Mon Nov 28 04:31:15 2011] XMMSAS bgd. selection expression = annulus(27886.547680, 25915.318600, 397.938298, 795.876595, X, Y)
[Mon Nov 28 04:31:15 2011] Writing fullrun_mos2_xmm0109463601_pi300-10000_pass1_cl_src4.gif
[Mon Nov 28 04:32:10 2011] Mean detx,y = (57.05, -8.25) 
[Mon Nov 28 04:32:13 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 04:32:29 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 04:32:29 2011] Setting source spectrum file to fullrun_mos2_xmm0109463601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Nov 28 04:32:29 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0109463601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Nov 28 04:34:55 2011] Not generating rmf since there are only 17 counts
[Mon Nov 28 04:34:55 2011] rmf not generated due to insufficient counts
[Mon Nov 28 04:35:22 2011] Updating aperture counts using extracted products
[Mon Nov 28 04:35:22 2011] Error reading totcts from fullrun_mos2_xmm0109463601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Nov 28 04:35:23 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 04:35:23 2011] Using photon index=1.80, rate=0.00319, arf fullrun_mos2_xmm0109463601_pi300-10000_pass1_cl_src4.arf
[Mon Nov 28 04:35:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 04:35:23 2011] Updating source flux to 4.6e-14
[Mon Nov 28 04:35:25 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Nov 28 04:35:26 2011] xmm0109463601/analysis//spectral/fullrun_mos2_xmm0109463601_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete