[Mon Nov 28 02:59:14 2011] Detection parameters:
  Position = (413.8, 347.4) = 23 14 26.78 -59 6 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.4 +/- 7.0
  Background counts = 2.4
  Rate = 0.01 +/- 0.002

[Mon Nov 28 02:59:14 2011] Off-axis axis estimate = 9.08'
[Mon Nov 28 03:06:12 2011] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 03:06:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 03:06:12 2011] Initial guess for spatial extent in simple fitting = 10.97"
[Mon Nov 28 03:06:12 2011] source mask rpix=2.5, npix_max = 36, mask sum = 29, frac = 0.794
[Mon Nov 28 03:06:12 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 10.97"
[Mon Nov 28 03:23:49 2011] fullrun_mos1_xmm0109463601_pi300-10000_cl_pass0_src2.ximg exists
[Mon Nov 28 03:23:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463601_pi300-10000_cl_pass0_src2.csv
[Mon Nov 28 03:23:49 2011] fullrun_mos1_xmm0109463601_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Nov 28 03:23:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463601_pi300-10000_cl_pass0_src2.csv
[Mon Nov 28 03:23:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109463601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109463601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 03:23:49 2011] fullrun_mos1_xmm0109463601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Nov 28 03:23:49 2011] fullrun_mos1_xmm0109463601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Nov 28 03:23:49 2011] Fit fullrun_mos1_xmm0109463601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Nov 28 03:43:49 2011] Warning, spatial fit 2 centroid is now closest to src. 2
[Mon Nov 28 03:43:49 2011] Source 3 is offset by -1.631665 and -0.894664 pixels which is larger than
2 X fitted extent = 1.254782 x 1.254782, not incorporating fit results
[Mon Nov 28 03:43:49 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 03:43:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 03:43:49 2011] Assessing source extent using major
[Mon Nov 28 03:43:49 2011] Source does appear to be extended
[Mon Nov 28 03:43:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 03:47:13 2011] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 03:47:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 03:47:13 2011] Initial guess for spatial extent in simple fitting = 10.97"
[Mon Nov 28 03:47:13 2011] source mask rpix=2.5, npix_max = 36, mask sum = 29, frac = 0.794
[Mon Nov 28 03:47:13 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 10.97"
[Mon Nov 28 04:06:35 2011] fullrun_mos1_xmm0109463601_pi300-10000_cl_pass1_src2.ximg exists
[Mon Nov 28 04:06:35 2011] fullrun_mos1_xmm0109463601_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Nov 28 04:06:35 2011] Fit fullrun_mos1_xmm0109463601_pi300-10000_cl_pass1_src2 appears to have run properly
[Mon Nov 28 04:06:35 2011] fullrun_mos1_xmm0109463601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Nov 28 04:06:35 2011] fullrun_mos1_xmm0109463601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Nov 28 04:06:35 2011] Fit fullrun_mos1_xmm0109463601_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Nov 28 04:27:14 2011] Spatial fit model total counts = 59.822600, observed total counts = 62.000000
[Mon Nov 28 04:27:14 2011] Offset between fit and detection position for source 3 = 0.393996 pixels
[Mon Nov 28 04:27:14 2011] 58.609900 total counts/ 35.481400 bgd. counts: snr = 3.882819
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.393996 pixels
  Position = (413.5, 347.2) = 23 14 26.98 -59 6 56.7
  Extent = 8.4 (2.7-11.2)" x 3.5 (7.6-9.9)", rotation angle = 105 (56-121) degrees
  Source counts = 23.1 +/- 7.7
  Background counts = 35.5
  Rate = 0.005 +/- 0.001
[Mon Nov 28 04:27:14 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 04:27:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 04:27:14 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 04:27:14 2011] Source does appear to be extended
[Mon Nov 28 04:27:14 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.28
[Mon Nov 28 04:29:05 2011] XMMSAS src. selection expression = ellipse(35922.573200, 30154.889200, 504.265215, 207.897006, 105.345600, X, Y)
[Mon Nov 28 04:29:05 2011] Writing source region out to fullrun_mos1_xmm0109463601_pi300-10000_pass1_cl_src3_src.reg
[Mon Nov 28 04:29:05 2011] Extracting stamp from image fullrun_mos1_xmm0109463601_pi300-10000_cl_sm2.00.img.gz, (384, 318) - (442, 376)
[Mon Nov 28 04:29:05 2011] XMMSAS bgd. selection expression = annulus(35922.573200, 30154.889200, 840.442024, 1680.884048, X, Y) && !ellipse(35254.816559, 30836.016785, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 04:29:05 2011] Writing fullrun_mos1_xmm0109463601_pi300-10000_pass1_cl_src3.gif
[Mon Nov 28 04:29:30 2011] Mean detx,y = (9215.31, 877.76) 
[Mon Nov 28 04:29:33 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 04:29:46 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 04:29:47 2011] Setting source spectrum file to fullrun_mos1_xmm0109463601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Nov 28 04:29:47 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0109463601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Nov 28 04:30:58 2011] Not generating rmf since there are only 23 counts
[Mon Nov 28 04:30:58 2011] rmf not generated due to insufficient counts
[Mon Nov 28 04:35:21 2011] Updating aperture counts using extracted products
[Mon Nov 28 04:35:21 2011] Error reading totcts from fullrun_mos1_xmm0109463601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Nov 28 04:35:22 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 04:35:22 2011] Using photon index=1.80, rate=0.0045, arf fullrun_mos1_xmm0109463601_pi300-10000_pass1_cl_src3.arf
[Mon Nov 28 04:35:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 04:35:22 2011] Updating source flux to 9.4e-14
[Mon Nov 28 04:35:24 2011] Flag b found in src. 3 procflags, skipping spectral fitting
[Mon Nov 28 04:35:24 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Nov 28 04:35:25 2011] xmm0109463601/analysis//spectral/fullrun_mos1_xmm0109463601_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete