[Sun May 20 16:26:14 2012] Detection parameters:
  Position = (312.6, 316.3) = 21 11 36.46 48 9 1.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.7 +/- 9.7
  Background counts = 3.2
  Rate = 0.01 +/- 0.001

[Sun May 20 16:26:15 2012] Off-axis axis estimate = 1.65'
[Sun May 20 16:56:28 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sun May 20 16:56:28 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sun May 20 16:56:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 25, frac = 1.330
[Sun May 20 16:56:28 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.25"
[Sun May 20 17:11:36 2012] fullrun_mos2_xmm0109463401_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 20 17:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109463401_pi300-10000_cl_pass0_src3.csv
[Sun May 20 17:11:36 2012] fullrun_mos2_xmm0109463401_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 20 17:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109463401_pi300-10000_cl_pass0_src3.csv
[Sun May 20 17:11:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109463401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109463401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 17:11:36 2012] fullrun_mos2_xmm0109463401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 20 17:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109463401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 20 17:11:36 2012] fullrun_mos2_xmm0109463401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 20 17:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109463401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 20 17:11:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109463401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109463401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 17:11:44 2012] Spatial fit model total counts = 89.405900, observed total counts = 79.000000
[Sun May 20 17:11:44 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 20 17:11:44 2012] Vigneting correction estimate = 1.000000
[Sun May 20 17:11:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 17:11:44 2012] Assessing source extent using major
[Sun May 20 17:11:44 2012] Source does appear to be extended
[Sun May 20 17:11:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 17:40:28 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sun May 20 17:40:28 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sun May 20 17:40:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 25, frac = 1.330
[Sun May 20 17:40:28 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.25"
[Sun May 20 17:53:12 2012] fullrun_mos2_xmm0109463401_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 20 17:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109463401_pi300-10000_cl_pass1_src3.csv
[Sun May 20 17:53:12 2012] fullrun_mos2_xmm0109463401_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 20 17:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109463401_pi300-10000_cl_pass1_src3.csv
[Sun May 20 17:53:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109463401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109463401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 17:53:12 2012] fullrun_mos2_xmm0109463401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 20 17:53:12 2012] fullrun_mos2_xmm0109463401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 20 17:53:12 2012] Fit fullrun_mos2_xmm0109463401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun May 20 17:53:17 2012] Spatial fit model total counts = 84.929600, observed total counts = 79.000000
[Sun May 20 17:53:17 2012] Offset between fit and detection position for source 2 = 0.280288 pixels
[Sun May 20 17:53:17 2012] 85.829100 total counts/ 54.057900 bgd. counts: snr = 4.321197
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.280288 pixels
  Position = (312.3, 316.5) = 21 11 36.57 48 9 1.3
  Extent = 2.7 (1.8-3.7)", rotation angle = 0
  Source counts = 31.8 +/- 9.3
  Background counts = 54.1
  Rate = 0.005 +/- 0.001
[Sun May 20 17:53:17 2012] Vigneting correction estimate = 1.000000
[Sun May 20 17:53:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 17:53:17 2012] Assessing source extent using major axis lower bound
[Sun May 20 17:53:17 2012] Source does appear to be extended
[Sun May 20 17:53:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 18:08:21 2012] XMMSAS src. selection expression = ellipse(27121.918600, 27483.690400, 164.316605, 164.316605, 0.000000, X, Y)
[Sun May 20 18:08:21 2012] Writing source region out to fullrun_mos2_xmm0109463401_pi300-10000_pass1_cl_src2_src.reg
[Sun May 20 18:08:21 2012] Extracting stamp from image fullrun_mos2_xmm0109463401_pi300-10000_cl_sm2.00.img.gz, (303, 307) - (322, 326)
[Sun May 20 18:08:21 2012] XMMSAS bgd. selection expression = annulus(27121.918600, 27483.690400, 273.861008, 547.722016, X, Y)
[Sun May 20 18:08:21 2012] Writing fullrun_mos2_xmm0109463401_pi300-10000_pass1_cl_src2.gif
[Sun May 20 18:09:04 2012] Mean detx,y = (53.37, -2.97) 
[Sun May 20 18:09:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 18:09:18 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 18:09:18 2012] Setting source spectrum file to fullrun_mos2_xmm0109463401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 20 18:09:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109463401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun May 20 18:13:59 2012] Not generating rmf since there are only 31 counts
[Sun May 20 18:13:59 2012] rmf not generated due to insufficient counts
[Sun May 20 18:14:44 2012] Updating aperture counts using extracted products
[Sun May 20 18:14:44 2012] Error reading totcts from fullrun_mos2_xmm0109463401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 20 18:14:45 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 18:14:45 2012] Using photon index=1.80, rate=0.00477, arf fullrun_mos2_xmm0109463401_pi300-10000_pass1_cl_src2.arf
[Sun May 20 18:14:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 18:14:45 2012] Updating source flux to 9.4e-14
[Sun May 20 18:14:53 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Sun May 20 18:14:53 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting