[Sun May 20 16:25:51 2012] Detection parameters:
  Position = (404.4, 416.9) = 21 10 56.42 48 16 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20.1 +/- 6.0
  Background counts = 2.2
  Rate = 0.006 +/- 0.002

[Sun May 20 16:25:51 2012] Off-axis axis estimate = 11.53'
[Sun May 20 16:41:21 2012] Using EEF radius (= 12.19 ")to estimate initial spatial extent for simple fitting
[Sun May 20 16:41:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 20 16:41:21 2012] Initial guess for spatial extent in simple fitting = 12.19"
[Sun May 20 16:41:21 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.963
[Sun May 20 16:41:21 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.19"
[Sun May 20 16:56:27 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src5.ximg exists
[Sun May 20 16:56:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src5.csv
[Sun May 20 16:56:27 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun May 20 16:56:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src5.csv
[Sun May 20 16:56:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 16:56:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun May 20 16:56:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun May 20 16:56:28 2012] Fit fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun May 20 17:11:41 2012] Spatial fit model total counts = 41.997700, observed total counts = 42.000000
[Sun May 20 17:11:41 2012] Offset between fit and detection position for source 7 = 0.531494 pixels
[Sun May 20 17:11:41 2012] 41.723300 total counts/ 23.900900 bgd. counts: snr = 3.645516
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.531494 pixels
  Position = (403.9, 417.0) = 21 10 56.65 48 16 17.9
  Extent = 7.4 (4.8-9.8)", rotation angle = 0
  Source counts = 17.8 +/- 6.5
  Background counts = 23.9
  Rate = 0.003 +/- 0.001
[Sun May 20 17:11:41 2012] Vigneting correction estimate = 1.000000
[Sun May 20 17:11:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 17:11:41 2012] Assessing source extent using major axis lower bound
[Sun May 20 17:11:41 2012] Source does appear to be extended
[Sun May 20 17:11:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 17:25:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 17:25:33 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Sun May 20 17:25:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Sun May 20 17:25:33 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.38"
[Sun May 20 17:40:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src5.ximg exists
[Sun May 20 17:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src5.csv
[Sun May 20 17:40:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun May 20 17:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src5.csv
[Sun May 20 17:40:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 17:40:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun May 20 17:40:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun May 20 17:40:28 2012] Fit fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun May 20 17:53:15 2012] Spatial fit model total counts = 41.164300, observed total counts = 40.000000
[Sun May 20 17:53:15 2012] Offset between fit and detection position for source 7 = 0.040063 pixels
[Sun May 20 17:53:15 2012] 40.787500 total counts/ 23.376300 bgd. counts: snr = 3.601147
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.040063 pixels
  Position = (403.9, 417.0) = 21 10 56.67 48 16 18.0
  Extent = 7.3 (4.2-9.9)", rotation angle = 0
  Source counts = 17.4 +/- 6.4
  Background counts = 23.4
  Rate = 0.003 +/- 0.001
[Sun May 20 17:53:15 2012] Vigneting correction estimate = 1.000000
[Sun May 20 17:53:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 17:53:15 2012] Assessing source extent using major axis lower bound
[Sun May 20 17:53:15 2012] Source does appear to be extended
[Sun May 20 17:53:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 18:01:45 2012] XMMSAS src. selection expression = ellipse(35086.798200, 36228.599000, 439.589413, 439.589413, 0.000000, X, Y)
[Sun May 20 18:01:45 2012] Writing source region out to fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src7_src.reg
[Sun May 20 18:01:45 2012] Extracting stamp from image fullrun_mos1_xmm0109463401_pi300-10000_cl_sm2.00.img.gz, (379, 392) - (429, 442)
[Sun May 20 18:01:45 2012] XMMSAS bgd. selection expression = annulus(35086.798200, 36228.599000, 732.649021, 1465.298042, X, Y)
[Sun May 20 18:01:45 2012] Writing fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src7.gif
[Sun May 20 18:03:02 2012] Mean detx,y = (9314.78, 7313.87) 
[Sun May 20 18:03:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 18:03:33 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 18:03:33 2012] Setting source spectrum file to fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun May 20 18:03:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun May 20 18:07:51 2012] Not generating rmf since there are only 17 counts
[Sun May 20 18:07:51 2012] rmf not generated due to insufficient counts
[Sun May 20 18:14:44 2012] Updating aperture counts using extracted products
[Sun May 20 18:14:44 2012] Error reading totcts from fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun May 20 18:14:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 18:14:44 2012] Using photon index=1.80, rate=0.00262, arf fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src7.arf
[Sun May 20 18:14:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 18:14:44 2012] Updating source flux to 4.8e-14
[Sun May 20 18:14:46 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting