[Sun May 20 16:25:51 2012] Detection parameters:
  Position = (363.1, 370.0) = 21 11 14.47 48 12 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.1 +/- 9.2
  Background counts = 2.6
  Rate = 0.01 +/- 0.002

[Sun May 20 16:25:51 2012] Off-axis axis estimate = 6.99'
[Sun May 20 16:41:21 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Sun May 20 16:41:21 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Sun May 20 16:41:21 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.164
[Sun May 20 16:41:21 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.92"
[Sun May 20 16:56:27 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src2.ximg exists
[Sun May 20 16:56:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src2.csv
[Sun May 20 16:56:27 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun May 20 16:56:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src2.csv
[Sun May 20 16:56:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 16:56:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun May 20 16:56:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun May 20 16:56:28 2012] Fit fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun May 20 17:11:41 2012] Spatial fit model total counts = 75.999600, observed total counts = 76.000000
[Sun May 20 17:11:41 2012] Offset between fit and detection position for source 5 = 0.214514 pixels
[Sun May 20 17:11:41 2012] 76.458700 total counts/ 41.074600 bgd. counts: snr = 5.521047
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.214514 pixels
  Position = (362.9, 369.9) = 21 11 14.56 48 12 53.7
  Extent = 3.9 (3.0-6.0)", rotation angle = 0
  Source counts = 35.4 +/- 8.7
  Background counts = 41.1
  Rate = 0.005 +/- 0.001
[Sun May 20 17:11:41 2012] Vigneting correction estimate = 1.000000
[Sun May 20 17:11:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 17:11:41 2012] Assessing source extent using major axis lower bound
[Sun May 20 17:11:41 2012] Source does appear to be extended
[Sun May 20 17:11:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 17:25:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 17:25:33 2012] Initial guess for spatial extent in simple fitting = 3.95"
[Sun May 20 17:25:33 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.758
[Sun May 20 17:25:33 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 3.95"
[Sun May 20 17:40:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src2.ximg exists
[Sun May 20 17:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src2.csv
[Sun May 20 17:40:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun May 20 17:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src2.csv
[Sun May 20 17:40:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 17:40:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun May 20 17:40:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun May 20 17:40:28 2012] Fit fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun May 20 17:53:15 2012] Spatial fit model total counts = 75.998900, observed total counts = 76.000000
[Sun May 20 17:53:15 2012] Offset between fit and detection position for source 5 = 0.001726 pixels
[Sun May 20 17:53:15 2012] 76.455400 total counts/ 40.975900 bgd. counts: snr = 5.542596
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.001726 pixels
  Position = (362.9, 369.9) = 21 11 14.56 48 12 53.7
  Extent = 4.0 (3.0-6.1)", rotation angle = 0
  Source counts = 35.5 +/- 8.7
  Background counts = 41.0
  Rate = 0.005 +/- 0.001
[Sun May 20 17:53:15 2012] Vigneting correction estimate = 1.000000
[Sun May 20 17:53:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 17:53:15 2012] Assessing source extent using major axis lower bound
[Sun May 20 17:53:15 2012] Source does appear to be extended
[Sun May 20 17:53:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 18:01:44 2012] XMMSAS src. selection expression = ellipse(31520.029820, 32135.399600, 238.299007, 238.299007, 0.000000, X, Y)
[Sun May 20 18:01:44 2012] Writing source region out to fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src5_src.reg
[Sun May 20 18:01:44 2012] Extracting stamp from image fullrun_mos1_xmm0109463401_pi300-10000_cl_sm2.00.img.gz, (349, 356) - (377, 384)
[Sun May 20 18:01:44 2012] XMMSAS bgd. selection expression = annulus(31520.029820, 32135.399600, 397.165011, 794.330023, X, Y)
[Sun May 20 18:01:44 2012] Writing fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src5.gif
[Sun May 20 18:02:05 2012] Mean detx,y = (5057.90, 3956.30) 
[Sun May 20 18:02:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 18:02:14 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 18:02:15 2012] Setting source spectrum file to fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun May 20 18:02:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun May 20 18:07:29 2012] Not generating rmf since there are only 35 counts
[Sun May 20 18:07:29 2012] rmf not generated due to insufficient counts
[Sun May 20 18:14:43 2012] Updating aperture counts using extracted products
[Sun May 20 18:14:43 2012] Error reading totcts from fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun May 20 18:14:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 18:14:44 2012] Using photon index=1.80, rate=0.00533, arf fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src5.arf
[Sun May 20 18:14:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 18:14:44 2012] Updating source flux to 9.4e-14
[Sun May 20 18:14:46 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting