[Sun May 20 16:25:50 2012] Detection parameters:
  Position = (323.0, 305.0) = 21 11 31.92 48 8 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.6 +/- 8.4
  Background counts = 2.8
  Rate = 0.006 +/- 0.001

[Sun May 20 16:25:51 2012] Off-axis axis estimate = 1.84'
[Sun May 20 16:41:21 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Sun May 20 16:41:21 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Sun May 20 16:41:21 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834
[Sun May 20 16:41:21 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.35"
[Sun May 20 16:56:27 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src4.ximg exists
[Sun May 20 16:56:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src4.csv
[Sun May 20 16:56:27 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun May 20 16:56:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src4.csv
[Sun May 20 16:56:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 16:56:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun May 20 16:56:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun May 20 16:56:28 2012] Fit fullrun_mos1_xmm0109463401_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun May 20 17:11:41 2012] Source 4 is offset by 6.027877 and 5.651835 pixels which is larger than
2 X fitted extent = 0.844887 x 0.844887, not incorporating fit results
[Sun May 20 17:11:41 2012] Vigneting correction estimate = 1.000000
[Sun May 20 17:11:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 17:11:41 2012] Assessing source extent using major
[Sun May 20 17:11:41 2012] Source does appear to be extended
[Sun May 20 17:11:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 17:25:33 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Sun May 20 17:25:33 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Sun May 20 17:25:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834
[Sun May 20 17:25:33 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.35"
[Sun May 20 17:40:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src4.ximg exists
[Sun May 20 17:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src4.csv
[Sun May 20 17:40:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun May 20 17:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src4.csv
[Sun May 20 17:40:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 17:40:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun May 20 17:40:28 2012] fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May 20 17:40:28 2012] Fit fullrun_mos1_xmm0109463401_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun May 20 17:53:15 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 17.167606 pixels away
[Sun May 20 17:53:15 2012] Source 4 is offset by 6.020153 and 5.603996 pixels which is larger than
2 X fitted extent = 0.844887 x 0.844887, not incorporating fit results
[Sun May 20 17:53:15 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 57.590125 pixels away
[Sun May 20 17:53:15 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 114.169869 pixels away
[Sun May 20 17:53:15 2012] Vigneting correction estimate = 1.000000
[Sun May 20 17:53:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 17:53:15 2012] Assessing source extent using major
[Sun May 20 17:53:15 2012] Source does appear to be extended
[Sun May 20 17:53:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 18:01:45 2012] XMMSAS src. selection expression = ellipse(28054.329315, 26482.469666, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 18:01:45 2012] Writing source region out to fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src4_src.reg
[Sun May 20 18:01:45 2012] Extracting stamp from image fullrun_mos1_xmm0109463401_pi300-10000_cl_sm2.00.img.gz, (286, 267) - (361, 342)
[Sun May 20 18:01:45 2012] XMMSAS bgd. selection expression = annulus(28054.329315, 26482.469666, 1087.500000, 2175.000000, X, Y) && !ellipse(27121.967800, 27458.775600, 341.332010, 228.320807, 120.477975, X, Y)
[Sun May 20 18:01:45 2012] Writing fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src4.gif
[Sun May 20 18:02:41 2012] Mean detx,y = (-756.18, 738.09) 
[Sun May 20 18:02:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 18:02:58 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 18:02:58 2012] Setting source spectrum file to fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun May 20 18:02:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun May 20 18:07:41 2012] Not generating rmf since there are only 41 counts
[Sun May 20 18:07:41 2012] rmf not generated due to insufficient counts
[Sun May 20 18:14:43 2012] Updating aperture counts using extracted products
[Sun May 20 18:14:44 2012] Error reading totcts from fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun May 20 18:14:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 18:14:44 2012] Using photon index=1.80, rate=0.00636, arf fullrun_mos1_xmm0109463401_pi300-10000_pass1_cl_src4.arf
[Sun May 20 18:14:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 18:14:44 2012] Updating source flux to 6.1e-14
[Sun May 20 18:14:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting