[Fri Jun 15 10:10:10 2012] Detection parameters:
  Position = (151.5, 334.8) = 19 58 19.95 -57 34 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.8 +/- 10.6
  Background counts = 7.9
  Rate = 0.006 +/- 0.0009

[Fri Jun 15 10:10:10 2012] Off-axis axis estimate = 10.98'
[Fri Jun 15 10:31:16 2012] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 10:31:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 10:31:16 2012] Initial guess for spatial extent in simple fitting = 11.92"
[Fri Jun 15 10:31:16 2012] source mask rpix=2.7, npix_max = 41, mask sum = 32, frac = 0.762
[Fri Jun 15 10:31:16 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.92"
[Fri Jun 15 10:46:07 2012] fullrun_mos1_xmm0109463101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 15 10:46:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463101_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 10:46:07 2012] fullrun_mos1_xmm0109463101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 15 10:46:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463101_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 10:46:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109463101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109463101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 10:46:07 2012] fullrun_mos1_xmm0109463101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 15 10:46:07 2012] fullrun_mos1_xmm0109463101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 15 10:46:07 2012] Fit fullrun_mos1_xmm0109463101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun 15 10:56:56 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.640805 pixels away
[Fri Jun 15 10:56:56 2012] Source 2 is offset by 4.826096 and 4.453212 pixels which is larger than
2 X fitted extent = 1.474639 x 1.474639, not incorporating fit results
[Fri Jun 15 10:56:56 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 10:56:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 10:56:56 2012] Assessing source extent using major
[Fri Jun 15 10:56:56 2012] Source does appear to be extended
[Fri Jun 15 10:56:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 11:13:08 2012] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 11:13:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 11:13:08 2012] Initial guess for spatial extent in simple fitting = 11.92"
[Fri Jun 15 11:13:08 2012] source mask rpix=2.7, npix_max = 41, mask sum = 32, frac = 0.762
[Fri Jun 15 11:13:08 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.92"
[Fri Jun 15 11:26:36 2012] fullrun_mos1_xmm0109463101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 15 11:26:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463101_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 11:26:36 2012] fullrun_mos1_xmm0109463101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 15 11:26:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109463101_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 11:26:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109463101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109463101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 11:26:36 2012] fullrun_mos1_xmm0109463101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 15 11:26:36 2012] fullrun_mos1_xmm0109463101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 15 11:26:36 2012] Fit fullrun_mos1_xmm0109463101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 15 11:36:40 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.740140 pixels away
[Fri Jun 15 11:36:40 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 11:36:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 11:36:40 2012] Assessing source extent using major
[Fri Jun 15 11:36:40 2012] Source does appear to be extended
[Fri Jun 15 11:36:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 11:54:26 2012] XMMSAS src. selection expression = ellipse(13128.122330, 29082.027435, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 11:54:26 2012] Writing source region out to fullrun_mos1_xmm0109463101_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun 15 11:54:26 2012] Extracting stamp from image fullrun_mos1_xmm0109463101_pi300-10000_cl_sm2.00.img.gz, (114, 297) - (189, 372)
[Fri Jun 15 11:54:26 2012] XMMSAS bgd. selection expression = annulus(13128.122330, 29082.027435, 1087.500000, 2175.000000, X, Y) && !ellipse(15099.894080, 28176.253800, 883.512025, 251.700807, 128.844706, X, Y)
[Fri Jun 15 11:54:26 2012] Writing fullrun_mos1_xmm0109463101_pi300-10000_pass1_cl_src2.gif
[Fri Jun 15 11:54:49 2012] Mean detx,y = (1820.26, 11387.62) 
[Fri Jun 15 11:54:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 11:55:02 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 11:55:02 2012] Setting source spectrum file to fullrun_mos1_xmm0109463101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 15 11:55:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109463101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun 15 11:56:22 2012] Not generating rmf since there are only 63 counts
[Fri Jun 15 11:56:22 2012] rmf not generated due to insufficient counts
[Fri Jun 15 11:59:14 2012] Updating aperture counts using extracted products
[Fri Jun 15 11:59:14 2012] Error reading totcts from fullrun_mos1_xmm0109463101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 15 11:59:14 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 11:59:14 2012] Using photon index=1.80, rate=0.00557, arf fullrun_mos1_xmm0109463101_pi300-10000_pass1_cl_src2.arf
[Fri Jun 15 11:59:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 11:59:14 2012] Updating source flux to 1e-13
[Fri Jun 15 11:59:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 15 11:59:16 2012] xmm0109463101/analysis//spectral/fullrun_mos1_xmm0109463101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete