[Mon Jun 18 21:16:45 2012] Detection parameters:
  Position = (266.2, 478.7) = 11 5 50.81 25 17 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.7 +/- 16.5
  Background counts = 2.7
  Rate = 0.02 +/- 0.002

[Mon Jun 18 21:16:45 2012] Off-axis axis estimate = 13.27'
[Mon Jun 18 21:43:37 2012] Using EEF radius (= 13.07 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 21:43:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 21:43:37 2012] Initial guess for spatial extent in simple fitting = 13.07"
[Mon Jun 18 21:43:37 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.998
[Mon Jun 18 21:43:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.07"
[Mon Jun 18 22:01:46 2012] fullrun_mos2_xmm0109462801_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 18 22:01:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109462801_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 22:01:46 2012] fullrun_mos2_xmm0109462801_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 18 22:01:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109462801_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 22:01:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109462801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109462801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 22:01:46 2012] fullrun_mos2_xmm0109462801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 18 22:01:46 2012] fullrun_mos2_xmm0109462801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 18 22:01:46 2012] Fit fullrun_mos2_xmm0109462801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun 18 22:01:51 2012] Spatial fit model total counts = 225.357000, observed total counts = 225.000000
[Mon Jun 18 22:01:51 2012] Offset between fit and detection position for source 4 = 0.489689 pixels
[Mon Jun 18 22:01:51 2012] 224.689100 total counts/ 78.460100 bgd. counts: snr = 16.508556
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.489689 pixels
  Position = (265.9, 478.3) = 11 5 50.90 25 17 46.9
  Extent = 8.1 (6.8-9.5)", rotation angle = 0
  Source counts = 146.2 +/- 15.0
  Background counts = 78.5
  Rate = 0.01 +/- 0.002
[Mon Jun 18 22:01:51 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 22:01:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 22:01:51 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 22:01:51 2012] Source does appear to be extended
[Mon Jun 18 22:01:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 22:25:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 18 22:25:37 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Mon Jun 18 22:25:37 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.892
[Mon Jun 18 22:25:37 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.13"
[Mon Jun 18 22:40:15 2012] fullrun_mos2_xmm0109462801_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 18 22:40:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109462801_pi300-10000_cl_pass1_src1.csv
[Mon Jun 18 22:40:15 2012] fullrun_mos2_xmm0109462801_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 18 22:40:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109462801_pi300-10000_cl_pass1_src1.csv
[Mon Jun 18 22:40:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109462801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109462801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 22:40:15 2012] fullrun_mos2_xmm0109462801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 18 22:40:15 2012] fullrun_mos2_xmm0109462801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 18 22:40:15 2012] Fit fullrun_mos2_xmm0109462801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun 18 22:40:21 2012] Spatial fit model total counts = 195.874000, observed total counts = 196.000000
[Mon Jun 18 22:40:21 2012] Offset between fit and detection position for source 4 = 0.116089 pixels
[Mon Jun 18 22:40:21 2012] 194.912700 total counts/ 67.063700 bgd. counts: snr = 15.611822
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.116089 pixels
  Position = (265.9, 478.4) = 11 5 50.88 25 17 47.4
  Extent = 6.9 (5.8-8.2)", rotation angle = 0
  Source counts = 127.8 +/- 14.0
  Background counts = 67.1
  Rate = 0.01 +/- 0.001
[Mon Jun 18 22:40:21 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 22:40:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 22:40:21 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 22:40:21 2012] Source does appear to be extended
[Mon Jun 18 22:40:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 23:05:14 2012] XMMSAS src. selection expression = ellipse(23088.318820, 41569.842800, 416.631012, 416.631012, 0.000000, X, Y)
[Mon Jun 18 23:05:14 2012] Writing source region out to fullrun_mos2_xmm0109462801_pi300-10000_pass1_cl_src4_src.reg
[Mon Jun 18 23:05:14 2012] Extracting stamp from image fullrun_mos2_xmm0109462801_pi300-10000_cl_sm2.00.img.gz, (242, 454) - (290, 502)
[Mon Jun 18 23:05:14 2012] XMMSAS bgd. selection expression = annulus(23088.318820, 41569.842800, 694.385020, 1388.770040, X, Y) && !ellipse(25043.955032, 41455.065916, 579.486417, 291.844408, 333.863686, X, Y)
[Mon Jun 18 23:05:14 2012] Writing fullrun_mos2_xmm0109462801_pi300-10000_pass1_cl_src4.gif
[Mon Jun 18 23:05:16 2012] Mean detx,y = (-4142.52, 13348.16) 
[Mon Jun 18 23:05:17 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 23:05:24 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 23:05:24 2012] Setting source spectrum file to fullrun_mos2_xmm0109462801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Jun 18 23:05:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109462801_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Jun 18 23:11:37 2012] Updating aperture counts using extracted products
[Mon Jun 18 23:11:37 2012] Error reading totcts from fullrun_mos2_xmm0109462801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Jun 18 23:11:38 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 23:11:38 2012] Using photon index=1.80, rate=0.0129, arf fullrun_mos2_xmm0109462801_pi300-10000_pass1_cl_src4.arf
[Mon Jun 18 23:11:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 23:11:38 2012] Updating source flux to 3.7e-13
[Mon Jun 18 23:11:50 2012] Reading fit data from xmm0109462801/analysis//spectral/fullrun_mos2_xmm0109462801_pi300-10000_pass1_cl_src4_pl.csv
[Mon Jun 18 23:11:50 2012] Spectral fit parameter nH value = 1.6991e+14
[Mon Jun 18 23:11:50 2012] Spectral fit parameter PhoIndex value = 1.67928
[Mon Jun 18 23:11:50 2012] Failed to get F(0.3-8.0) from xmm0109462801/analysis//spectral/fullrun_mos2_xmm0109462801_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Mon Jun 18 23:11:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 23:11:50 2012] Using Nh = 1.7e+14, photon index=1.68, rate=0.0129, arf fullrun_mos2_xmm0109462801_pi300-10000_pass1_cl_src4.arf
[Mon Jun 18 23:11:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 23:11:50 2012] Updating source flux to 4e-13