[Mon Jun 18 21:16:27 2012] Detection parameters:
  Position = (379.0, 377.9) = 11 5 14.63 25 10 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.8 +/- 9.0
  Background counts = 3.2
  Rate = 0.008 +/- 0.001

[Mon Jun 18 21:16:27 2012] Off-axis axis estimate = 8.21'
[Mon Jun 18 21:23:26 2012] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 21:23:26 2012] Initial guess for spatial extent in simple fitting = 10.53"
[Mon Jun 18 21:23:26 2012] source mask rpix=2.4, npix_max = 34, mask sum = 31, frac = 0.908
[Mon Jun 18 21:23:26 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.53"
[Mon Jun 18 21:43:37 2012] fullrun_mos1_xmm0109462801_pi300-10000_cl_pass0_src5.ximg exists
[Mon Jun 18 21:43:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109462801_pi300-10000_cl_pass0_src5.csv
[Mon Jun 18 21:43:37 2012] fullrun_mos1_xmm0109462801_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Jun 18 21:43:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109462801_pi300-10000_cl_pass0_src5.csv
[Mon Jun 18 21:43:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109462801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109462801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 21:43:37 2012] fullrun_mos1_xmm0109462801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Jun 18 21:43:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109462801_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Jun 18 21:43:37 2012] fullrun_mos1_xmm0109462801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jun 18 21:43:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109462801_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Jun 18 21:43:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109462801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109462801_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 22:01:50 2012] Source 8 is offset by -6.648777 and 5.640721 pixels which is larger than
2 X fitted extent = 0.837099 x 0.837099, not incorporating fit results
[Mon Jun 18 22:01:50 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 22:01:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 22:01:50 2012] Assessing source extent using major
[Mon Jun 18 22:01:50 2012] Source does appear to be extended
[Mon Jun 18 22:01:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 22:07:25 2012] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 22:07:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 22:07:25 2012] Initial guess for spatial extent in simple fitting = 10.53"
[Mon Jun 18 22:07:25 2012] source mask rpix=2.4, npix_max = 34, mask sum = 31, frac = 0.908
[Mon Jun 18 22:07:25 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.53"
[Mon Jun 18 22:25:37 2012] fullrun_mos1_xmm0109462801_pi300-10000_cl_pass1_src5.ximg exists
[Mon Jun 18 22:25:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109462801_pi300-10000_cl_pass1_src5.csv
[Mon Jun 18 22:25:37 2012] fullrun_mos1_xmm0109462801_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Jun 18 22:25:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109462801_pi300-10000_cl_pass1_src5.csv
[Mon Jun 18 22:25:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109462801_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109462801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 22:25:37 2012] fullrun_mos1_xmm0109462801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Jun 18 22:25:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109462801_pi300-10000_cl_pass1_tfrozen_src5.csv
[Mon Jun 18 22:25:37 2012] fullrun_mos1_xmm0109462801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jun 18 22:25:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109462801_pi300-10000_cl_pass1_tfrozen_src5.csv
[Mon Jun 18 22:25:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109462801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109462801_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 22:40:19 2012] Spatial fit model total counts = 121.413000, observed total counts = 106.000000
[Mon Jun 18 22:40:19 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 18 22:40:19 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 22:40:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 22:40:19 2012] Assessing source extent using major
[Mon Jun 18 22:40:19 2012] Source does appear to be extended
[Mon Jun 18 22:40:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 22:57:46 2012] XMMSAS src. selection expression = ellipse(32928.676361, 32832.622711, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 18 22:57:46 2012] Writing source region out to fullrun_mos1_xmm0109462801_pi300-10000_pass1_cl_src8_src.reg
[Mon Jun 18 22:57:46 2012] Extracting stamp from image fullrun_mos1_xmm0109462801_pi300-10000_cl_sm2.00.img.gz, (342, 340) - (417, 415)
[Mon Jun 18 22:57:46 2012] XMMSAS bgd. selection expression = annulus(32928.676361, 32832.622711, 1087.500000, 2175.000000, X, Y) && !ellipse(34278.653074, 34429.927014, 440.720964, 290.892381, 84.088804, X, Y)
[Mon Jun 18 22:57:46 2012] Writing fullrun_mos1_xmm0109462801_pi300-10000_pass1_cl_src8.gif
[Mon Jun 18 22:58:24 2012] Mean detx,y = (1113.69, 8152.01) 
[Mon Jun 18 22:58:25 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 22:58:43 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 22:58:43 2012] Setting source spectrum file to fullrun_mos1_xmm0109462801_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jun 18 22:58:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109462801_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Jun 18 23:04:27 2012] Not generating rmf since there are only 54 counts
[Mon Jun 18 23:04:27 2012] rmf not generated due to insufficient counts
[Mon Jun 18 23:11:37 2012] Updating aperture counts using extracted products
[Mon Jun 18 23:11:37 2012] Error reading totcts from fullrun_mos1_xmm0109462801_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jun 18 23:11:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 23:11:37 2012] Using photon index=1.80, rate=0.0081, arf fullrun_mos1_xmm0109462801_pi300-10000_pass1_cl_src8.arf
[Mon Jun 18 23:11:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 23:11:37 2012] Updating source flux to 1.1e-13
[Mon Jun 18 23:11:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting