[Wed Aug 29 22:05:33 2012] Detection parameters:
  Position = (288.2, 475.7) = 11 5 43.90 25 17 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.9 +/- 6.9
  Background counts = 3.3
  Rate = 0.002 +/- 0.0006

[Wed Aug 29 22:05:33 2012] Off-axis axis estimate = 12.88'
[Wed Aug 29 22:24:28 2012] Using EEF radius (= 12.87 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 22:24:28 2012] Initial guess for spatial extent in simple fitting = 12.87"
[Wed Aug 29 22:24:28 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.025
[Wed Aug 29 22:24:28 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 12.87"
[Wed Aug 29 22:40:26 2012] fullrun_mos2_xmm0109461801_pi300-10000_cl_pass0_src14.ximg exists
[Wed Aug 29 22:40:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109461801_pi300-10000_cl_pass0_src14.csv
[Wed Aug 29 22:40:26 2012] fullrun_mos2_xmm0109461801_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Aug 29 22:40:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109461801_pi300-10000_cl_pass0_src14.csv
[Wed Aug 29 22:40:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109461801_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109461801_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 22:40:26 2012] fullrun_mos2_xmm0109461801_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Aug 29 22:40:26 2012] fullrun_mos2_xmm0109461801_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Aug 29 22:40:26 2012] Fit fullrun_mos2_xmm0109461801_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Aug 29 22:40:30 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.557742 pixels away
[Wed Aug 29 22:40:30 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 22:40:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 22:40:30 2012] Assessing source extent using major
[Wed Aug 29 22:40:30 2012] Source does appear to be extended
[Wed Aug 29 22:40:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 22:56:32 2012] Using EEF radius (= 12.87 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 22:56:32 2012] Initial guess for spatial extent in simple fitting = 12.87"
[Wed Aug 29 22:56:32 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.025
[Wed Aug 29 22:56:32 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 12.87"
[Wed Aug 29 23:11:40 2012] fullrun_mos2_xmm0109461801_pi300-10000_cl_pass1_src14.ximg exists
[Wed Aug 29 23:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109461801_pi300-10000_cl_pass1_src14.csv
[Wed Aug 29 23:11:40 2012] fullrun_mos2_xmm0109461801_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed Aug 29 23:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109461801_pi300-10000_cl_pass1_src14.csv
[Wed Aug 29 23:11:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109461801_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109461801_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 23:11:41 2012] fullrun_mos2_xmm0109461801_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed Aug 29 23:11:41 2012] fullrun_mos2_xmm0109461801_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed Aug 29 23:11:41 2012] Fit fullrun_mos2_xmm0109461801_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Wed Aug 29 23:11:45 2012] Spatial fit model total counts = 59.997400, observed total counts = 60.000000
[Wed Aug 29 23:11:45 2012] Offset between fit and detection position for source 17 = 0.253115 pixels
[Wed Aug 29 23:11:45 2012] 59.329100 total counts/ 39.876200 bgd. counts: snr = 3.080544
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.253115 pixels
  Position = (288.5, 475.7) = 11 5 43.82 25 17 39.0
  Extent = 5.8 (3.2-9.7)", rotation angle = 0
  Source counts = 19.5 +/- 7.7
  Background counts = 39.9
  Rate = 0.002 +/- 0.0007
[Wed Aug 29 23:11:45 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 23:11:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 23:11:45 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 23:11:45 2012] Source does appear to be extended
[Wed Aug 29 23:11:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 23:18:15 2012] XMMSAS src. selection expression = ellipse(25047.694600, 41340.026200, 350.266810, 350.266810, 0.000000, X, Y)
[Wed Aug 29 23:18:15 2012] Writing source region out to fullrun_mos2_xmm0109461801_pi300-10000_pass1_cl_src17_src.reg
[Wed Aug 29 23:18:15 2012] Extracting stamp from image fullrun_mos2_xmm0109461801_pi300-10000_cl_sm2.00.img.gz, (268, 456) - (309, 496)
[Wed Aug 29 23:18:15 2012] XMMSAS bgd. selection expression = annulus(25047.694600, 41340.026200, 583.778017, 1167.556034, X, Y)
[Wed Aug 29 23:18:15 2012] Writing fullrun_mos2_xmm0109461801_pi300-10000_pass1_cl_src17.gif
[Wed Aug 29 23:20:14 2012] Mean detx,y = (-5378.96, 12337.85) 
[Wed Aug 29 23:20:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 23:20:19 2012] grppha failed
[Wed Aug 29 23:20:19 2012] Setting source spectrum file to fullrun_mos2_xmm0109461801_pi300-10000_pass1_cl_src17_src.pi.gz
[Wed Aug 29 23:20:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109461801_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Aug 29 23:20:42 2012] Not generating rmf since there are only 19 counts
[Wed Aug 29 23:20:42 2012] rmf not generated due to insufficient counts
[Wed Aug 29 23:20:50 2012] Updating aperture counts using extracted products
[Wed Aug 29 23:20:50 2012] Error reading totcts from fullrun_mos2_xmm0109461801_pi300-10000_pass1_cl_src17_src.pi.gz
[Wed Aug 29 23:20:50 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 23:20:51 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Aug 29 23:20:52 2012] xmm0109461801/analysis//spectral/fullrun_mos2_xmm0109461801_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete