[Tue Jul  3 03:06:06 2012] Detection parameters:
  Position = (280.3, 167.5) = 10 7 39.11 -20 25 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.8 +/- 8.0
  Background counts = 3.9
  Rate = 0.01 +/- 0.002

[Tue Jul  3 03:06:06 2012] Off-axis axis estimate = 9.58'
[Tue Jul  3 03:22:18 2012] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 03:22:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul  3 03:22:18 2012] Initial guess for spatial extent in simple fitting = 11.22"
[Tue Jul  3 03:22:18 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.108
[Tue Jul  3 03:22:18 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.22"
[Tue Jul  3 03:29:10 2012] fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jul  3 03:29:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_src2.csv
[Tue Jul  3 03:29:10 2012] fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jul  3 03:29:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_src2.csv
[Tue Jul  3 03:29:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 03:29:10 2012] fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jul  3 03:29:10 2012] fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jul  3 03:29:10 2012] Fit fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jul  3 03:29:13 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.801316 pixels away
[Tue Jul  3 03:29:13 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 03:29:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 03:29:13 2012] Assessing source extent using major
[Tue Jul  3 03:29:13 2012] Source does appear to be extended
[Tue Jul  3 03:29:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 03:42:03 2012] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 03:42:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul  3 03:42:03 2012] Initial guess for spatial extent in simple fitting = 11.22"
[Tue Jul  3 03:42:03 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.108
[Tue Jul  3 03:42:03 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.22"
[Tue Jul  3 03:48:58 2012] fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jul  3 03:48:58 2012] fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jul  3 03:48:58 2012] Fit fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_src2 appears to have run properly
[Tue Jul  3 03:48:58 2012] fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jul  3 03:48:58 2012] fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jul  3 03:48:58 2012] Fit fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jul  3 03:49:00 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.661378 pixels away
[Tue Jul  3 03:49:00 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 03:49:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 03:49:00 2012] Assessing source extent using major
[Tue Jul  3 03:49:00 2012] Source does appear to be extended
[Tue Jul  3 03:49:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 04:01:54 2012] XMMSAS src. selection expression = ellipse(24334.136780, 14528.253357, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul  3 04:01:54 2012] Writing source region out to fullrun_mos2_xmm0109461301_pi300-10000_pass1_cl_src6_src.reg
[Tue Jul  3 04:01:54 2012] Extracting stamp from image fullrun_mos2_xmm0109461301_pi300-10000_cl_sm2.00.img.gz, (243, 130) - (318, 205)
[Tue Jul  3 04:01:54 2012] XMMSAS bgd. selection expression = annulus(24334.136780, 14528.253357, 1087.500000, 2175.000000, X, Y)
[Tue Jul  3 04:01:54 2012] Writing fullrun_mos2_xmm0109461301_pi300-10000_pass1_cl_src6.gif
[Tue Jul  3 04:02:35 2012] Mean detx,y = (-5243.47, 7860.94) 
[Tue Jul  3 04:02:36 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 04:02:48 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 04:02:48 2012] Setting source spectrum file to fullrun_mos2_xmm0109461301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jul  3 04:02:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109461301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jul  3 04:06:22 2012] Not generating rmf since there are only 38 counts
[Tue Jul  3 04:06:22 2012] rmf not generated due to insufficient counts
[Tue Jul  3 04:06:41 2012] Updating aperture counts using extracted products
[Tue Jul  3 04:06:41 2012] Error reading totcts from fullrun_mos2_xmm0109461301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jul  3 04:06:41 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 04:06:41 2012] Using photon index=1.80, rate=0.00959, arf fullrun_mos2_xmm0109461301_pi300-10000_pass1_cl_src6.arf
[Tue Jul  3 04:06:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 04:06:41 2012] Updating source flux to 1.6e-13
[Tue Jul  3 04:06:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting