[Tue Jul  3 03:06:06 2012] Detection parameters:
  Position = (294.3, 275.1) = 10 7 34.75 -20 17 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3584.8 +/- 70.7
  Background counts = 6.1
  Rate = 0.5 +/- 0.01

[Tue Jul  3 03:06:06 2012] Off-axis axis estimate = 1.72'
[Tue Jul  3 03:22:18 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 03:22:18 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Jul  3 03:22:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Tue Jul  3 03:22:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Jul  3 03:29:10 2012] fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul  3 03:29:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_src1.csv
[Tue Jul  3 03:29:10 2012] fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul  3 03:29:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_src1.csv
[Tue Jul  3 03:29:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 03:29:10 2012] fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul  3 03:29:10 2012] fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul  3 03:29:10 2012] Fit fullrun_mos2_xmm0109461301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul  3 03:29:13 2012] Spatial fit model total counts = 3272.280000, observed total counts = 3221.000000
[Tue Jul  3 03:29:13 2012] Offset between fit and detection position for source 1 = 0.047035 pixels
[Tue Jul  3 03:29:13 2012] 3277.313000 total counts/ 752.823000 bgd. counts: snr = 92.008344
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.047035 pixels
  Position = (294.4, 275.1) = 10 7 34.75 -20 17 33.2
  Extent = 5.7 (5.5-5.8)", rotation angle = 0
  Source counts = 2524.5 +/- 57.2
  Background counts = 752.8
  Rate = 0.3 +/- 0.008
[Tue Jul  3 03:29:13 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 03:29:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 03:29:13 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 03:29:13 2012] Source does appear to be extended
[Tue Jul  3 03:29:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 03:42:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  3 03:42:03 2012] Initial guess for spatial extent in simple fitting = 5.68"
[Tue Jul  3 03:42:03 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.920
[Tue Jul  3 03:42:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.68"
[Tue Jul  3 03:48:58 2012] fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul  3 03:48:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_src1.csv
[Tue Jul  3 03:48:58 2012] fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul  3 03:48:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_src1.csv
[Tue Jul  3 03:48:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 03:48:58 2012] fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul  3 03:48:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jul  3 03:48:58 2012] fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul  3 03:48:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jul  3 03:48:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109461301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 03:49:00 2012] Warning, spatial fit 1 centroid is now closest to src. 5
[Tue Jul  3 03:49:00 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 03:49:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 03:49:00 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 03:49:00 2012] Source does appear to be extended
[Tue Jul  3 03:49:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 04:01:54 2012] Counts = 2524.490000, rescaling region sizes by 2.000000
[Tue Jul  3 04:01:54 2012] XMMSAS src. selection expression = ellipse(25561.228800, 23885.508600, 681.661220, 681.661220, 0.000000, X, Y)
[Tue Jul  3 04:01:54 2012] Writing source region out to fullrun_mos2_xmm0109461301_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul  3 04:01:54 2012] Extracting stamp from image fullrun_mos2_xmm0109461301_pi300-10000_cl_sm2.00.img.gz, (255, 236) - (334, 314)
[Tue Jul  3 04:01:54 2012] XMMSAS bgd. selection expression = annulus(25561.228800, 23885.508600, 2272.204065, 4544.408131, X, Y) && !ellipse(26624.298676, 24206.435181, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  3 04:01:54 2012] Writing fullrun_mos2_xmm0109461301_pi300-10000_pass1_cl_src1.gif
[Tue Jul  3 04:01:55 2012] Mean detx,y = (-24.95, 25.82) 
[Tue Jul  3 04:01:56 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 04:02:34 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 04:02:34 2012] Setting source spectrum file to fullrun_mos2_xmm0109461301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul  3 04:02:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109461301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul  3 04:06:41 2012] Updating aperture counts using extracted products
[Tue Jul  3 04:06:41 2012] Error reading totcts from fullrun_mos2_xmm0109461301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul  3 04:06:41 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 04:06:41 2012] Using photon index=1.80, rate=0.344, arf fullrun_mos2_xmm0109461301_pi300-10000_pass1_cl_src1.arf
[Tue Jul  3 04:06:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 04:06:41 2012] Updating source flux to 3.6e-12
[Tue Jul  3 04:06:55 2012] Reading fit data from xmm0109461301/analysis//spectral/fullrun_mos2_xmm0109461301_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jul  3 04:06:55 2012] Spectral fit parameter nH value = 5.81912e+20
[Tue Jul  3 04:06:55 2012] Spectral fit parameter PhoIndex value = 7.47293
[Tue Jul  3 04:06:55 2012] Failed to get F(0.3-8.0) from xmm0109461301/analysis//spectral/fullrun_mos2_xmm0109461301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jul  3 04:06:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 04:06:55 2012] Using Nh = 5.8e+20, photon index=7.47, rate=0.344, arf fullrun_mos2_xmm0109461301_pi300-10000_pass1_cl_src1.arf
[Tue Jul  3 04:06:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 04:06:55 2012] Updating source flux to 2.8e-12