[Sat Jul 28 09:37:44 2012] Detection parameters:
  Position = (253.3, 239.1) = 11 41 46.98 -64 16 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 227.3 +/- 19.5
  Background counts = 20.9
  Rate = 0.03 +/- 0.002

[Sat Jul 28 09:37:44 2012] Off-axis axis estimate = 5.40'
[Sat Jul 28 09:51:29 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 09:51:29 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Sat Jul 28 09:51:29 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.925
[Sat Jul 28 09:51:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.13"
[Sat Jul 28 10:03:58 2012] fullrun_mos1_xmm0109460801_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 28 10:03:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109460801_pi300-10000_cl_pass0_src1.csv
[Sat Jul 28 10:03:59 2012] fullrun_mos1_xmm0109460801_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 28 10:03:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109460801_pi300-10000_cl_pass0_src1.csv
[Sat Jul 28 10:03:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109460801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109460801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 10:03:59 2012] fullrun_mos1_xmm0109460801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 28 10:03:59 2012] fullrun_mos1_xmm0109460801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 28 10:03:59 2012] Fit fullrun_mos1_xmm0109460801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 28 10:17:54 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.725494 pixels away
[Sat Jul 28 10:17:54 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 10:17:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 10:17:54 2012] Assessing source extent using major
[Sat Jul 28 10:17:54 2012] Source does appear to be extended
[Sat Jul 28 10:17:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 10:38:20 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 10:38:20 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Sat Jul 28 10:38:20 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.925
[Sat Jul 28 10:38:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.13"
[Sat Jul 28 10:52:54 2012] fullrun_mos1_xmm0109460801_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 28 10:52:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109460801_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 10:52:54 2012] fullrun_mos1_xmm0109460801_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 28 10:52:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109460801_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 10:52:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109460801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109460801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 10:52:54 2012] fullrun_mos1_xmm0109460801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 28 10:52:54 2012] fullrun_mos1_xmm0109460801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 28 10:52:54 2012] Fit fullrun_mos1_xmm0109460801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 28 11:05:10 2012] Spatial fit model total counts = 213.723000, observed total counts = 214.000000
[Sat Jul 28 11:05:10 2012] Offset between fit and detection position for source 7 = 0.171620 pixels
[Sat Jul 28 11:05:10 2012] 215.998000 total counts/ 105.050000 bgd. counts: snr = 10.824839
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.171620 pixels
  Position = (253.5, 239.2) = 11 41 46.87 -64 16 8.0
  Extent = 6.5 (5.3-7.6)", rotation angle = 0
  Source counts = 110.9 +/- 14.7
  Background counts = 105.0
  Rate = 0.01 +/- 0.002
[Sat Jul 28 11:05:10 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 11:05:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 11:05:10 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 11:05:10 2012] Source does appear to be extended
[Sat Jul 28 11:05:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 11:22:02 2012] XMMSAS src. selection expression = ellipse(22005.038000, 20761.972000, 391.550411, 391.550411, 0.000000, X, Y)
[Sat Jul 28 11:22:02 2012] Writing source region out to fullrun_mos1_xmm0109460801_pi300-10000_pass1_cl_src7_src.reg
[Sat Jul 28 11:22:02 2012] Extracting stamp from image fullrun_mos1_xmm0109460801_pi300-10000_cl_sm2.00.img.gz, (231, 217) - (276, 262)
[Sat Jul 28 11:22:02 2012] XMMSAS bgd. selection expression = annulus(22005.038000, 20761.972000, 652.584019, 1305.168038, X, Y)
[Sat Jul 28 11:22:02 2012] Writing fullrun_mos1_xmm0109460801_pi300-10000_pass1_cl_src7.gif
[Sat Jul 28 11:22:06 2012] Mean detx,y = (-1000.95, -7819.16) 
[Sat Jul 28 11:22:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 11:22:29 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 11:22:29 2012] Setting source spectrum file to fullrun_mos1_xmm0109460801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Jul 28 11:22:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109460801_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Jul 28 11:43:10 2012] Updating aperture counts using extracted products
[Sat Jul 28 11:43:10 2012] Error reading totcts from fullrun_mos1_xmm0109460801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Jul 28 11:43:11 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:43:11 2012] Using photon index=1.80, rate=0.0128, arf fullrun_mos1_xmm0109460801_pi300-10000_pass1_cl_src7.arf
[Sat Jul 28 11:43:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:43:11 2012] Updating source flux to 2.2e-13
[Sat Jul 28 11:43:30 2012] Reading fit data from xmm0109460801/analysis//spectral/fullrun_mos1_xmm0109460801_pi300-10000_pass1_cl_src7_pl.csv
[Sat Jul 28 11:43:30 2012] Spectral fit parameter nH value = 1.60635e+22
[Sat Jul 28 11:43:30 2012] Spectral fit parameter PhoIndex value = 0.568839
[Sat Jul 28 11:43:30 2012] Failed to get F(0.3-8.0) from xmm0109460801/analysis//spectral/fullrun_mos1_xmm0109460801_pi300-10000_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Sat Jul 28 11:43:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:43:30 2012] Using Nh = 1.6e+22, photon index=0.57, rate=0.0128, arf fullrun_mos1_xmm0109460801_pi300-10000_pass1_cl_src7.arf
[Sat Jul 28 11:43:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:43:31 2012] Updating source flux to 6.6e-13