[Wed Aug 15 10:11:53 2012] Detection parameters:
  Position = (220.4, 421.3) = 1 54 33.38 -59 39 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.4 +/- 6.6
  Background counts = 3.7
  Rate = 0.006 +/- 0.002

[Wed Aug 15 10:11:53 2012] Off-axis axis estimate = 10.55'
[Wed Aug 15 10:27:51 2012] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 10:27:51 2012] Initial guess for spatial extent in simple fitting = 11.70"
[Wed Aug 15 10:27:51 2012] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.203
[Wed Aug 15 10:27:51 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.70"
[Wed Aug 15 10:39:45 2012] fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug 15 10:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 10:39:45 2012] fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug 15 10:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 10:39:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 10:39:45 2012] fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug 15 10:39:45 2012] fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug 15 10:39:45 2012] Fit fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Aug 15 10:39:49 2012] Spatial fit model total counts = 54.999800, observed total counts = 55.000000
[Wed Aug 15 10:39:49 2012] Offset between fit and detection position for source 7 = 0.156443 pixels
[Wed Aug 15 10:39:49 2012] 53.985900 total counts/ 37.369200 bgd. counts: snr = 2.718240
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.156443 pixels
  Position = (220.3, 421.4) = 1 54 33.46 -59 39 27.1
  Extent = 4.5 (2.9-6.6)", rotation angle = 0
  Source counts = 16.6 +/- 7.3
  Background counts = 37.4
  Rate = 0.002 +/- 0.001
[Wed Aug 15 10:39:49 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 10:39:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 10:39:49 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 10:39:49 2012] Source does appear to be extended
[Wed Aug 15 10:39:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 10:53:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 10:53:02 2012] Initial guess for spatial extent in simple fitting = 4.50"
[Wed Aug 15 10:53:02 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.955
[Wed Aug 15 10:53:02 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.50"
[Wed Aug 15 11:02:51 2012] fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_src3.ximg exists
[Wed Aug 15 11:02:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_src3.csv
[Wed Aug 15 11:02:51 2012] fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Aug 15 11:02:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_src3.csv
[Wed Aug 15 11:02:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 11:02:52 2012] fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug 15 11:02:52 2012] fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug 15 11:02:52 2012] Fit fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Aug 15 11:02:55 2012] Warning, spatial fit 3 centroid is now closest to src. 4
[Wed Aug 15 11:02:55 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 11:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 11:02:55 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 11:02:55 2012] Source does appear to be extended
[Wed Aug 15 11:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 11:02:55 2012] Deleting source due to low Poisson probability 0.9