[Wed Aug 15 10:11:53 2012] Detection parameters: Position = (117.0, 249.8) = 1 55 33.39 -59 51 50.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 34.4 +/- 7.6 Background counts = 3.2 Rate = 0.005 +/- 0.001 [Wed Aug 15 10:11:53 2012] Off-axis axis estimate = 13.61' [Wed Aug 15 10:27:51 2012] Using EEF radius (= 13.24 ")to estimate initial spatial extent for simple fitting [Wed Aug 15 10:27:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Aug 15 10:27:51 2012] Initial guess for spatial extent in simple fitting = 13.24" [Wed Aug 15 10:27:51 2012] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.115 [Wed Aug 15 10:27:51 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.24" [Wed Aug 15 10:39:45 2012] fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_src5.ximg exists [Wed Aug 15 10:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_src5.csv [Wed Aug 15 10:39:45 2012] fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_src5_1.ximg exists [Wed Aug 15 10:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_src5.csv [Wed Aug 15 10:39:45 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 15 10:39:45 2012] fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Wed Aug 15 10:39:45 2012] fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Wed Aug 15 10:39:45 2012] Fit fullrun_mos2_xmm0109460201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly [Wed Aug 15 10:39:49 2012] Spatial fit model total counts = 64.998400, observed total counts = 65.000000 [Wed Aug 15 10:39:49 2012] Offset between fit and detection position for source 1 = 0.304574 pixels [Wed Aug 15 10:39:49 2012] 65.089600 total counts/ 43.075400 bgd. counts: snr = 3.354195 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.304574 pixels Position = (117.3, 249.9) = 1 55 33.21 -59 51 51.2 Extent = 5.3 (3.8-7.2)", rotation angle = 0 Source counts = 22.0 +/- 8.1 Background counts = 43.1 Rate = 0.003 +/- 0.001 [Wed Aug 15 10:39:49 2012] Vigneting correction estimate = 1.000000 [Wed Aug 15 10:39:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 15 10:39:49 2012] Assessing source extent using major axis lower bound [Wed Aug 15 10:39:49 2012] Source does appear to be extended [Wed Aug 15 10:39:49 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 15 10:53:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Aug 15 10:53:02 2012] Initial guess for spatial extent in simple fitting = 5.33" [Wed Aug 15 10:53:02 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.008 [Wed Aug 15 10:53:02 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.33" [Wed Aug 15 11:02:52 2012] fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_src5.ximg exists [Wed Aug 15 11:02:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_src5.csv [Wed Aug 15 11:02:52 2012] fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_src5_1.ximg exists [Wed Aug 15 11:02:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_src5.csv [Wed Aug 15 11:02:52 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 15 11:02:52 2012] fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Wed Aug 15 11:02:52 2012] fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Wed Aug 15 11:02:52 2012] Fit fullrun_mos2_xmm0109460201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly [Wed Aug 15 11:02:55 2012] Spatial fit model total counts = 49.998700, observed total counts = 50.000000 [Wed Aug 15 11:02:55 2012] Offset between fit and detection position for source 1 = 0.046321 pixels [Wed Aug 15 11:02:55 2012] 49.865300 total counts/ 27.499500 bgd. counts: snr = 4.265029 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.046321 pixels Position = (117.3, 249.9) = 1 55 33.23 -59 51 51.1 Extent = 5.3 (3.9-7.4)", rotation angle = 0 Source counts = 22.4 +/- 7.1 Background counts = 27.5 Rate = 0.003 +/- 0.001 [Wed Aug 15 11:02:55 2012] Vigneting correction estimate = 1.000000 [Wed Aug 15 11:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 15 11:02:55 2012] Assessing source extent using major axis lower bound [Wed Aug 15 11:02:55 2012] Source does appear to be extended [Wed Aug 15 11:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 15 11:09:35 2012] XMMSAS src. selection expression = ellipse(10158.372800, 21692.216400, 320.250609, 320.250609, 0.000000, X, Y) [Wed Aug 15 11:09:35 2012] Writing source region out to fullrun_mos2_xmm0109460201_pi300-10000_pass1_cl_src1_src.reg [Wed Aug 15 11:09:35 2012] Extracting stamp from image fullrun_mos2_xmm0109460201_pi300-10000_cl_sm2.00.img.gz, (99, 231) - (136, 268) [Wed Aug 15 11:09:35 2012] XMMSAS bgd. selection expression = annulus(10158.372800, 21692.216400, 533.751015, 1067.502031, X, Y) [Wed Aug 15 11:09:35 2012] Writing fullrun_mos2_xmm0109460201_pi300-10000_pass1_cl_src1.gif [Wed Aug 15 11:10:45 2012] Mean detx,y = (1437.48, 14671.85) [Wed Aug 15 11:10:46 2012] Setting backscal keywords in source and bgd. spectrum [Wed Aug 15 11:10:53 2012] Binned source spectrum to 10 counts/bin [Wed Aug 15 11:10:53 2012] Setting source spectrum file to fullrun_mos2_xmm0109460201_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed Aug 15 11:10:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109460201_pi300-10000_pass1_cl_src1_bgd.pi.gz [Wed Aug 15 11:11:21 2012] Not generating rmf since there are only 22 counts [Wed Aug 15 11:11:21 2012] rmf not generated due to insufficient counts [Wed Aug 15 11:11:36 2012] Updating aperture counts using extracted products [Wed Aug 15 11:11:36 2012] Error reading totcts from fullrun_mos2_xmm0109460201_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed Aug 15 11:11:36 2012] Calculating source flux in energy range 0.30-8.00 [Wed Aug 15 11:11:36 2012] Using photon index=1.80, rate=0.00306, arf fullrun_mos2_xmm0109460201_pi300-10000_pass1_cl_src1.arf [Wed Aug 15 11:11:36 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Aug 15 11:11:36 2012] Updating source flux to 1.1e-13 [Wed Aug 15 11:11:38 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting [Wed Aug 15 11:11:39 2012] xmm0109460201/analysis//spectral/fullrun_mos2_xmm0109460201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete