[Thu May 31 10:09:57 2012] Detection parameters:
  Position = (466.3, 288.8) = 1 30 59.47 -65 55 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17.0 +/- 5.2
  Background counts = 1.6
  Rate = 0.002 +/- 0.0007

[Thu May 31 10:09:57 2012] Off-axis axis estimate = 12.19'
[Thu May 31 11:00:53 2012] Using EEF radius (= 12.52 ")to estimate initial spatial extent for simple fitting
[Thu May 31 11:00:53 2012] Initial guess for spatial extent in simple fitting = 12.52"
[Thu May 31 11:00:53 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.073
[Thu May 31 11:00:53 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.52"
[Thu May 31 11:20:59 2012] fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_src11.ximg exists
[Thu May 31 11:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_src11.csv
[Thu May 31 11:20:59 2012] fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May 31 11:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_src11.csv
[Thu May 31 11:20:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 11:20:59 2012] fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May 31 11:20:59 2012] fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May 31 11:20:59 2012] Fit fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu May 31 11:21:13 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.905927 pixels away
[Thu May 31 11:21:13 2012] Vigneting correction estimate = 1.000000
[Thu May 31 11:21:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 11:21:13 2012] Assessing source extent using major
[Thu May 31 11:21:13 2012] Source does appear to be extended
[Thu May 31 11:21:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 12:10:38 2012] Using EEF radius (= 12.52 ")to estimate initial spatial extent for simple fitting
[Thu May 31 12:10:38 2012] Initial guess for spatial extent in simple fitting = 12.52"
[Thu May 31 12:10:38 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.073
[Thu May 31 12:10:38 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.52"
[Thu May 31 12:31:20 2012] fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_src11.ximg exists
[Thu May 31 12:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_src11.csv
[Thu May 31 12:31:20 2012] fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu May 31 12:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_src11.csv
[Thu May 31 12:31:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 12:31:20 2012] fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu May 31 12:31:20 2012] fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu May 31 12:31:20 2012] Fit fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu May 31 12:31:28 2012] Spatial fit model total counts = 27.864900, observed total counts = 28.000000
[Thu May 31 12:31:28 2012] Offset between fit and detection position for source 3 = 0.287730 pixels
[Thu May 31 12:31:28 2012] 27.568600 total counts/ 17.120200 bgd. counts: snr = 2.525198
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.287730 pixels
  Position = (466.1, 289.0) = 1 30 59.61 -65 55 23.6
  Extent = 3.7 (3.1-5.0)", rotation angle = 0
  Source counts = 10.4 +/- 5.3
  Background counts = 17.1
  Rate = 0.001 +/- 0.0007
[Thu May 31 12:31:28 2012] Vigneting correction estimate = 1.000000
[Thu May 31 12:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 12:31:28 2012] Assessing source extent using major axis lower bound
[Thu May 31 12:31:28 2012] Source does appear to be extended
[Thu May 31 12:31:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 12:48:44 2012] XMMSAS src. selection expression = ellipse(40504.555200, 25093.082600, 219.571206, 219.571206, 0.000000, X, Y)
[Thu May 31 12:48:44 2012] Writing source region out to fullrun_mos2_xmm0109460101_pi300-10000_pass1_cl_src3_src.reg
[Thu May 31 12:48:44 2012] Extracting stamp from image fullrun_mos2_xmm0109460101_pi300-10000_cl_sm2.00.img.gz, (454, 276) - (479, 302)
[Thu May 31 12:48:44 2012] XMMSAS bgd. selection expression = annulus(40504.555200, 25093.082600, 365.952011, 731.904021, X, Y)
[Thu May 31 12:48:44 2012] Writing fullrun_mos2_xmm0109460101_pi300-10000_pass1_cl_src3.gif
[Thu May 31 12:51:40 2012] Mean detx,y = (-8702.00, 9121.42) 
[Thu May 31 12:51:43 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 12:51:52 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 12:51:52 2012] Setting source spectrum file to fullrun_mos2_xmm0109460101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 31 12:51:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109460101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May 31 12:52:50 2012] Not generating rmf since there are only 10 counts
[Thu May 31 12:52:50 2012] rmf not generated due to insufficient counts
[Thu May 31 12:53:12 2012] Updating aperture counts using extracted products
[Thu May 31 12:53:12 2012] Error reading totcts from fullrun_mos2_xmm0109460101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 31 12:53:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 12:53:12 2012] Using photon index=1.80, rate=0.00145, arf fullrun_mos2_xmm0109460101_pi300-10000_pass1_cl_src3.arf
[Thu May 31 12:53:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 12:53:12 2012] Updating source flux to 5.5e-14
[Thu May 31 12:53:19 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 31 12:53:20 2012] xmm0109460101/analysis//spectral/fullrun_mos2_xmm0109460101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete