[Thu May 31 10:09:57 2012] Detection parameters:
  Position = (490.8, 381.1) = 1 30 42.63 -65 48 40.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.1 +/- 15.2
  Background counts = 1.6
  Rate = 0.02 +/- 0.002

[Thu May 31 10:09:57 2012] Off-axis axis estimate = 15.18'
[Thu May 31 11:00:53 2012] Using EEF radius (= 14.02 ")to estimate initial spatial extent for simple fitting
[Thu May 31 11:00:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 31 11:00:53 2012] Initial guess for spatial extent in simple fitting = 14.02"
[Thu May 31 11:00:53 2012] source mask rpix=3.2, npix_max = 55, mask sum = 61, frac = 1.100
[Thu May 31 11:00:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 14.02"
[Thu May 31 11:20:59 2012] fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 31 11:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_src1.csv
[Thu May 31 11:20:59 2012] fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 31 11:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_src1.csv
[Thu May 31 11:20:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 11:20:59 2012] fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 31 11:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May 31 11:20:59 2012] fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 31 11:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May 31 11:20:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109460101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 11:21:13 2012] Spatial fit model total counts = 227.458000, observed total counts = 193.000000
[Thu May 31 11:21:13 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 31 11:21:13 2012] Vigneting correction estimate = 1.000000
[Thu May 31 11:21:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 11:21:13 2012] Assessing source extent using major
[Thu May 31 11:21:13 2012] Source does appear to be extended
[Thu May 31 11:21:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 12:10:38 2012] Using EEF radius (= 14.02 ")to estimate initial spatial extent for simple fitting
[Thu May 31 12:10:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 31 12:10:38 2012] Initial guess for spatial extent in simple fitting = 14.02"
[Thu May 31 12:10:38 2012] source mask rpix=3.2, npix_max = 55, mask sum = 61, frac = 1.100
[Thu May 31 12:10:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.02"
[Thu May 31 12:31:20 2012] fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 31 12:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_src1.csv
[Thu May 31 12:31:20 2012] fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 31 12:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_src1.csv
[Thu May 31 12:31:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 12:31:20 2012] fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 31 12:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu May 31 12:31:20 2012] fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 31 12:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu May 31 12:31:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109460101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 12:31:28 2012] Spatial fit model total counts = 228.456000, observed total counts = 193.000000
[Thu May 31 12:31:28 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 31 12:31:28 2012] Vigneting correction estimate = 1.000000
[Thu May 31 12:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 12:31:28 2012] Assessing source extent using major
[Thu May 31 12:31:28 2012] Source does appear to be extended
[Thu May 31 12:31:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 12:48:44 2012] XMMSAS src. selection expression = ellipse(42654.802704, 33106.727936, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 31 12:48:44 2012] Writing source region out to fullrun_mos2_xmm0109460101_pi300-10000_pass1_cl_src1_src.reg
[Thu May 31 12:48:44 2012] Extracting stamp from image fullrun_mos2_xmm0109460101_pi300-10000_cl_sm2.00.img.gz, (453, 344) - (528, 419)
[Thu May 31 12:48:44 2012] XMMSAS bgd. selection expression = annulus(42654.802704, 33106.727936, 1087.500000, 2175.000000, X, Y) && !ellipse(41311.783400, 33491.518400, 755.542422, 291.992808, 83.286202, X, Y)
[Thu May 31 12:48:44 2012] Writing fullrun_mos2_xmm0109460101_pi300-10000_pass1_cl_src1.gif
[Thu May 31 12:48:45 2012] Mean detx,y = (-3863.22, 15829.69) 
[Thu May 31 12:48:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 12:49:03 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 12:49:03 2012] Setting source spectrum file to fullrun_mos2_xmm0109460101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 31 12:49:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109460101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 31 12:51:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 31 12:51:54 2012] rmf not generated due to insufficient counts
[Thu May 31 12:53:11 2012] Updating aperture counts using extracted products
[Thu May 31 12:53:12 2012] Error reading totcts from fullrun_mos2_xmm0109460101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 31 12:53:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 12:53:12 2012] Using photon index=1.80, rate=0.0228, arf fullrun_mos2_xmm0109460101_pi300-10000_pass1_cl_src1.arf
[Thu May 31 12:53:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 12:53:12 2012] Updating source flux to 7.3e-13
[Thu May 31 12:53:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 31 12:53:20 2012] xmm0109460101/analysis//spectral/fullrun_mos2_xmm0109460101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete