[Thu May 31 10:09:39 2012] Detection parameters:
  Position = (234.3, 263.8) = 1 33 44.49 -65 57 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 15.2 +/- 5.0
  Background counts = 1.6
  Rate = 0.003 +/- 0.001

[Thu May 31 10:09:39 2012] Off-axis axis estimate = 5.29'
[Thu May 31 10:33:49 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Thu May 31 10:33:49 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Thu May 31 10:33:49 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.935
[Thu May 31 10:33:49 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 9.07"
[Thu May 31 11:00:53 2012] fullrun_mos1_xmm0109460101_pi300-10000_cl_pass0_src12.ximg exists
[Thu May 31 11:00:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109460101_pi300-10000_cl_pass0_src12.csv
[Thu May 31 11:00:53 2012] fullrun_mos1_xmm0109460101_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu May 31 11:00:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109460101_pi300-10000_cl_pass0_src12.csv
[Thu May 31 11:00:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109460101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109460101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 11:00:53 2012] fullrun_mos1_xmm0109460101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu May 31 11:00:53 2012] fullrun_mos1_xmm0109460101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu May 31 11:00:53 2012] Fit fullrun_mos1_xmm0109460101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Thu May 31 11:21:10 2012] Spatial fit model total counts = 23.261200, observed total counts = 22.000000
[Thu May 31 11:21:10 2012] Offset between fit and detection position for source 11 = 0.114454 pixels
[Thu May 31 11:21:10 2012] 23.059700 total counts/ 13.767500 bgd. counts: snr = 2.504327
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.114454 pixels
  Position = (234.3, 263.9) = 1 33 44.47 -65 57 15.2
  Extent = 3.2 (2.3-4.3)", rotation angle = 0
  Source counts = 9.3 +/- 4.8
  Background counts = 13.8
  Rate = 0.001 +/- 0.0007
[Thu May 31 11:21:10 2012] Vigneting correction estimate = 1.000000
[Thu May 31 11:21:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 11:21:10 2012] Assessing source extent using major axis lower bound
[Thu May 31 11:21:10 2012] Source does appear to be extended
[Thu May 31 11:21:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 11:50:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 11:50:39 2012] Initial guess for spatial extent in simple fitting = 3.22"
[Thu May 31 11:50:39 2012] Spatial fitting skipped for pass 1: source                                 has 9.3 net counts, is at off-axis angle 5.3'
[Thu May 31 12:31:26 2012] Vigneting correction estimate = 1.000000
[Thu May 31 12:31:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 12:31:26 2012] Assessing source extent using major axis lower bound
[Thu May 31 12:31:26 2012] Source does appear to be extended
[Thu May 31 12:31:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 12:41:14 2012] XMMSAS src. selection expression = ellipse(20333.988600, 22911.076800, 193.315644, 193.315644, 0.000000, X, Y)
[Thu May 31 12:41:14 2012] Writing source region out to fullrun_mos1_xmm0109460101_pi300-10000_pass1_cl_src11_src.reg
[Thu May 31 12:41:14 2012] Extracting stamp from image fullrun_mos1_xmm0109460101_pi300-10000_cl_sm2.00.img.gz, (223, 253) - (245, 275)
[Thu May 31 12:41:14 2012] XMMSAS bgd. selection expression = annulus(20333.988600, 22911.076800, 322.192740, 644.385480, X, Y)
[Thu May 31 12:41:14 2012] Writing fullrun_mos1_xmm0109460101_pi300-10000_pass1_cl_src11.gif
[Thu May 31 12:44:11 2012] Mean detx,y = (-7622.60, -2626.50) 
[Thu May 31 12:44:12 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 12:44:20 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 12:44:21 2012] Setting source spectrum file to fullrun_mos1_xmm0109460101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu May 31 12:44:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109460101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu May 31 12:48:39 2012] Not generating rmf since there are only 9 counts
[Thu May 31 12:48:39 2012] rmf not generated due to insufficient counts
[Thu May 31 12:53:11 2012] Updating aperture counts using extracted products
[Thu May 31 12:53:11 2012] Error reading totcts from fullrun_mos1_xmm0109460101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu May 31 12:53:11 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 12:53:11 2012] Using photon index=1.80, rate=0.00129, arf fullrun_mos1_xmm0109460101_pi300-10000_pass1_cl_src11.arf
[Thu May 31 12:53:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 12:53:11 2012] Updating source flux to 2.9e-14
[Thu May 31 12:53:13 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting